1. Comparison of RANS-based jet noise models and assessment of a ray tracing method

   • V. Rosa
   • C. J. Deschamps
   • C. R. S. Ilário

   Technical Paper 11 March 2017 Pages: 1859 - 1872

   

2. Numerical study of red blood cell motion and deformation through a michrochannel using lattice Boltzmann-immersed boundary method

   • Ashkan Ghafouri
   • Amir Hassanzadeh

   Technical Paper 26 July 2016 Pages: 1873 - 1882

   

3. Simulating the AFM-based biomanipulation of cylindrical micro/nanoparticles in different biological environments

   • M. H. Korayem
   • M. Taheri
   • H. Khaksar

   Technical Paper 26 October 2016 Pages: 1883 - 1894

   

4. Topography and surface energy of dental implants: a methodological approach

   • Tarsis Prado Barbosa
   • Marina Melo Naves
   • Henara Lillian Costa

   Technical Paper 03 January 2017 Pages: 1895 - 1907

   

5. Experimental assessment of a pressure swirl atomizer for ethanol operation on a small gas generator

   • Ramon Eduardo Pereira Silva
   • Leila Ribeiro dos Santos
   • Pedro Teixeira Lacava

   Technical Paper 20 February 2017 Pages: 1909 - 1917

   

6. Effects of EGR rate on performance and emissions of a diesel power generator fueled by B7

   • Domenico De Serio
   • Alex de Oliveira
   • José Ricardo Sodré

   Technical Paper Open access 03 April 2017 Pages: 1919 - 1927

   

7. Energy saving of a hydrostatic drive system by incorporating soft switch

   • Anil C. Mahato
   • Sanjoy K. Ghoshal
   • Arun K. Samantaray

   Technical Paper 01 March 2017 Pages: 1929 - 1945

   

8. Power flow and efficiency analysis of the EM power split mechanism

   • Pouyan Ahmadizadeh
   • Behrooz Mashadi

   Technical Paper 11 August 2016 Pages: 1947 - 1955

   

9. Numerical generation of road profile through spectral description for simulation of vehicle suspension

   • Chandrashekhar S. Dharankar
   • Mahesh Kumar Hada
   • Sunil Chandel

   Technical Paper 04 August 2016 Pages: 1957 - 1967

   

10. On Hamilton’s principle for discrete systems of variable mass and the corresponding Lagrange’s equations

    • William C. Guttner
    • Celso P. Pesce

    Technical Paper 24 August 2016 Pages: 1969 - 1976

    

11. Numerical analysis of lug effects on tractive performance of off-road wheel by DEM

    • Yonghao Du
    • Jingwei Gao
    • Yuanchao Zhang

    Technical Paper 07 September 2016 Pages: 1977 - 1987

    

12. Parametric investigation of the effects of deadrise angle and demi-hull separation on impact forces and spray characteristics of catamaran water entry

    • Roya Shademani
    • Parviz Ghadimi

    Technical Paper 23 November 2016 Pages: 1989 - 1999

    

13. Carbon nanotube (CNT)-suspended nanofluid analysis due to metachronal beating of cilia with entropy generation

    • Noreen Sher Akbar
    • Adil Wahid Butt

    Technical Paper 23 November 2016 Pages: 2001 - 2012

    

14. Monodisperse non-Newtonian micro-droplet generation in a co-flow device

    • Arsalan Taassob
    • Mohammad Karim Dehghan Manshadi
    • Reza Kamali

    Technical Paper 02 January 2017 Pages: 2013 - 2021

    

15. Experiment and simulation research on abrasive water jet nozzle wear behavior and anti-wear structural improvement

    • Xiaochen Chen
    • Songsheng Deng
    • Weixing Hua

    Technical Paper 10 January 2017 Pages: 2023 - 2033

    

16. Computational modeling of magnetohydrodynamic convection from a rotating cone in orthotropic Darcian porous media

    • O. Anwar Bég
    • V. R. Prasad
    • R. S. R. Gorla

    Technical Paper 12 January 2017 Pages: 2035 - 2054

    

17. Numerical and experimental investigation of HDPE behavior during 2-ECAP process using 90° and 120° dies

    • Ali Mitsak
    • Benaoumeur Aour

    Technical Paper 10 June 2016 Pages: 2055 - 2069

    

18. An investigation on surface finish and flank wear in hard machining of solution treated and aged 18 % Ni maraging steel

    • M. Santhanakumar
    • R. Adalarasan
    • A. Velayudham

    Technical Paper 30 May 2016 Pages: 2071 - 2084

    

19. Investigation of cutting parameters affecting on tool wear and surface roughness in dry turning of Ti-6Al-4V using CVD and PVD coated tools

    • Yahya Hışman Çelik
    • Erol Kilickap
    • Musa Güney

    Original Paper 26 July 2016 Pages: 2085 - 2093

    

20. Self-adaptive stress accelerated life testing scheme

    • Dazhang You
    • Hoang Pham

    Technical Paper 21 November 2016 Pages: 2095 - 2103

    

21. A reliability-based design framework for early stages of design process

    • Murat Mayda
    • Seung-Kyum Choi

    Technical Paper 15 February 2017 Pages: 2105 - 2120

    

22. Optimum design of straight bevel gears pair using evolutionary algorithms

    • Abolfazl Zolfaghari
    • Masoud Goharimanesh
    • Ali Akbar Akbari

    Technical Paper 20 February 2017 Pages: 2121 - 2129

    

23. Control strategy and thermal inertia influence on evacuated tube solar water heating systems

    • Tudor Prisecaru
    • Iuliana Soriga

    Technical Paper 12 January 2017 Pages: 2131 - 2144

    

24. Flow and heat transfer analysis of magnetohydrodynamic (MHD) second-grade fluid in a channel with a porous wall

    • K. P. Priyadarsan
    • S. Panda

    Technical Paper 10 February 2017 Pages: 2145 - 2157

    

25. Influence of chemically reacting species in MHD stagnation point flow of an Oldroyd-B fluid with partial slip

    • Z. Abbas
    • Fatima Taiba Gull
    • M. Sajid

    Technical Paper 16 February 2017 Pages: 2159 - 2169

    

26. Transitional flow of non-Newtonian fluids in open channels of different cross-sectional shapes

    • Christine Kabwe
    • Rainer Haldenwang
    • Raj Chhabra

    Technical Paper 21 March 2017 Pages: 2171 - 2189

    

27. Entropy generation analysis of radiative heat transfer effects on channel flow of two immiscible couple stress fluids

    • J. Srinivas
    • J. V. Ramana Murthy
    • O. Anwar Bég

    Technical Paper 13 March 2017 Pages: 2191 - 2202

    

28. Magnetic field effects on dynamic behavior of inhomogeneous thermo-piezo-electrically actuated nanoplates

    • Farzad Ebrahimi
    • Mohammad Reza Barati

    Technical Paper 12 October 2016 Pages: 2203 - 2223

    

29. Optimisation of monotube magnetorheological damper under shear mode

    • T. M. Gurubasavaraju
    • Hemantha Kumar
    • M. Arun

    Technical Paper 12 January 2017 Pages: 2225 - 2240

    

30. A novel numerical method for form-finding analysis of branching structures

    • Zhongwei Zhao
    • Bing Liang
    • Qingwei Sun

    Technical Paper 17 January 2017 Pages: 2241 - 2252

    

31. A universal kinematic analysis of geared mechanisms

    • Essam L. Esmail

    Technical Paper 24 January 2017 Pages: 2253 - 2258

    

32. Effect of the quenching residual stress on ductile fracture behavior of pre-stretched aluminum alloy plates

    • Huafeng Ding
    • Caichao Zhu
    • Dong Qian

    Technical Paper 25 January 2017 Pages: 2259 - 2267

    

33. Calculation and analysis of contact ratio of helical curve-face gear pair

    • Chao Lin
    • Xiaoyong Wu

    Technical Paper 29 March 2017 Pages: 2269 - 2278

    

34. Experimental de-stratification and heat loss in a storage tank containing different thermal oils

    • Ashmore Mawire

    Technical Paper 15 November 2016 Pages: 2279 - 2288

    

35. Thermal analysis of solar-assisted heat pumps for swimming pool heating

    • Allan R. Starke
    • Jose M. Cardemil
    • Sergio Colle

    Technical Paper 21 November 2016 Pages: 2289 - 2306

    

36. Al₂O₃/water nano-fluid forced convective flow in a rectangular curved micro-channel: first and second law analysis, single-phase and multi-phase approach

    • Alireza Razeghi
    • Iraj Mirzaee
    • Hosseinali Soltanipour

    Technical Paper 24 November 2016 Pages: 2307 - 2318

    

37. Multi-objective optimization of asymmetric v-shaped ribs in a cooling channel using CFD, artificial neural networks and genetic algorithms

    • Mohammad Darvish Damavandi
    • Hamed Safikhani
    • Mojtaba Yahyaabadi

    Technical Paper 26 December 2016 Pages: 2319 - 2329

    

38. Analysis of the multi-spectral energy bundle method: finding the number of sub-bundles for the minimum computational time

    • Denis A. R. C. Negócio
    • André Maurente

    Technical Paper 30 March 2017 Pages: 2331 - 2339

    

39. Stochastic analysis of torsional drill-string vibrations considering the passage from a soft to a harder rock layer

    • D. M. Lobo
    • T. G. Ritto
    • D. A. Castello

    Technical Paper 08 May 2017 Pages: 2341 - 2349

    

40. Erratum to: Heat transfer and inclined magnetic field analysis on peristaltically induced motion of small particles

    • M. M. Bhatti
    • A. Zeeshan
    • R. Ellahi

    Erratum 11 April 2017 Pages: 2351 - 2351