1. Pulsatile blood flow in the thoracic aorta and aneurysm: a numerical simulation in CAD-built and patient-specific model

   • Matheus Silveira
   • Rudolf Huebner
   • Túlio Pinho Navarro

   Technical Paper 30 June 2017 Pages: 3721 - 3728

   

2. Developing new brain injury criteria for predicting the intracranial response by calculating von Mises stress, coup pressure and contrecoup pressure

   • Javad Afshari
   • Mohammad Haghpanahi
   • Reza Kalantarinejad

   Technical Paper 13 July 2017 Pages: 3729 - 3741

   

3. Bone density growth and the biomechanics of healthy and prosthetic femur

   • Joan O’Connor
   • Lavinia A. Borges
   • Antônio G. B. da Cruz

   Technical Paper 07 August 2017 Pages: 3743 - 3756

   

4. Visualization of combustion performance and emission characteristics of a four-cylinder diesel engine at various injection timings and engine loads

   • Huaping Xu
   • Bifeng Yin
   • Hekun Jia

   Technical Paper 23 August 2017 Pages: 3757 - 3767

   

5. Dynamic modeling and analysis of high-speed planetary gear including centrifugal force

   • Changzhao Liu
   • Datong Qin
   • Yinghua Liao

   Technical Paper 13 April 2017 Pages: 3769 - 3778

   

6. Design of an improved predictive LTR for rollover warning systems

   • Haiqing Li
   • Youqun Zhao
   • Fen Lin

   Technical Paper 28 April 2017 Pages: 3779 - 3791

   

7. Optimal design of a hydraulic excavator working device based on parallel particle swarm optimization

   • Xin Li
   • Guoqiang Wang
   • Xuefei Li

   Technical Paper 29 April 2017 Pages: 3793 - 3805

   

8. Dynamic characteristics of torus involute gear drive

   • Lei Liu
   • Ye-Ping Xiong

   Technical Paper 29 April 2017 Pages: 3807 - 3819

   

9. Three-dimensional investigation of the effects of regular seafloor geometry on low frequency sound propagation using parabolic equations

   • Saman Kermani
   • Parviz Ghadimi

   Technical Paper 14 July 2017 Pages: 3821 - 3835

   

10. Vibration monitoring, fault detection, and bearings replacement of a real wind turbine

    • Henrique D. M. de Azevedo
    • Pedro H. C. de Arruda Filho
    • Ricardo M. C. de Souza

    Technical Paper 18 July 2017 Pages: 3837 - 3848

    

11. Bending and shearing responses for dynamic analysis of single-layer graphene sheets under moving load

    • Davood Shahsavari
    • Maziar Janghorban

    Technical Paper 24 July 2017 Pages: 3849 - 3861

    

12. Prediction of impinging spray penetration and cone angle under different injection and ambient conditions by means of CFD and ANNs

    • Hashem Nowruzi
    • Hassan Ghassemi
    • Iman Sohrabi-asl

    Technical Paper 06 April 2017 Pages: 3863 - 3880

    

13. Effect of a porous layer on Newtonian and power-law fluids flows between rotating cylinders using lattice Boltzmann method

    • S. Khali
    • R. Nebbali
    • K. Bouhadef

    Technical Paper 11 May 2017 Pages: 3881 - 3895

    

14. Mixed convection in a triangular cavity permeated with micropolar nanofluid-saturated porous medium under the impact of MHD

    • Tariq Javed
    • Ziafat Mehmood
    • Muhammad Arshad Siddiqui

    Technical Paper 11 July 2017 Pages: 3897 - 3909

    

15. Dynamics of spreading of impinged droplets on the curved-grooved surface

    • V. N. Lad

    Technical Paper 18 July 2017 Pages: 3911 - 3918

    

16. On the performance of the DG method with a directional do-nothing boundary condition

    • Aureo Quintas Garcia
    • Francisco Augusto Aparecido Gomes
    • Mildred Ballin Hecke

    Technical Paper 31 July 2017 Pages: 3919 - 3929

    

17. PIV measurements and numerical analysis of in-cylinder tumble flow in a motored engine

    • Roberto Berlini Rodrigues da Costa
    • Raphael Meireles Braga
    • Rudolf Huebner

    Technical Paper 03 August 2017 Pages: 3931 - 3945

    

18. Improvement of effectiveness of EMHD flow separation control

    • Hari Sankar
    • A. M. Pradeep

    Technical Paper 03 August 2017 Pages: 3947 - 3963

    

19. Implementation of a parallel ADI algorithm on a finite volume GPU-based elementary porous media flow computation

    • L. Henríquez-Vargas
    • E. Villaroel
    • P. Donoso-García

    Technical Paper 09 August 2017 Pages: 3965 - 3979

    

20. Comparison of scratch resistance of lamellar and compacted graphite irons used in cylinder liners

    • João Luiz do Vale
    • Matheus Cortz
    • Giuseppe Pintaude

    Technical Paper 26 November 2016 Pages: 3981 - 3988

    

21. Analysis of dimple textured surfaces on cutting tools

    • Rodrigo L. Stoeterau
    • Andreas Janssen
    • Guilherme Mallmann

    Technical Paper 08 December 2016 Pages: 3989 - 3996

    

22. Experimental investigations into the effects of SPIF forming conditions on surface roughness and formability by design of experiments

    • Amrut Mulay
    • Satish Ben
    • Andrzej Kocanda

    Technical Paper 10 January 2017 Pages: 3997 - 4010

    

23. A new simulation-based metaheuristic approach in optimization of bilayer composite sheet hydroforming

    • Abbas Hashemi
    • Mohammad Hoseinpour-Gollo
    • Ali Pourkamali-Anaraki

    Technical Paper 31 January 2017 Pages: 4011 - 4020

    

24. Multivariate mean square error for the multiobjective optimization of AISI 52100 hardened steel turning with wiper ceramic inserts tool: a comparative study

    • P. H. S. Campos
    • G. Belinato
    • P. P. Balestrassi

    Technical Paper 06 July 2017 Pages: 4021 - 4036

    

25. Effect of pitting corrosion on similar and dissimilar alloy welded joints

    • Mohiuddin Ahmed Khan
    • Qaiser Sultan
    • Fawad Tariq

    Technical Paper 11 July 2017 Pages: 4037 - 4044

    

26. Optimisation of internal roller burnishing process in CNC machining center using response surface methodology

    • M. R. Stalin John
    • B. Balaji
    • B. K. Vinayagam

    Technical Paper 25 July 2017 Pages: 4045 - 4057

    

27. Formability of a wire arc deposited aluminium alloy

    • C. M. A. Silva
    • I. M. F. Bragança
    • P. A. F. Martins

    Technical Paper 26 July 2017 Pages: 4059 - 4068

    

28. The surface integrity of AISI 1010 and AISI 4340 steels subjected to face milling

    • Jean Carlos C. Pereira
    • Paulo César M. Rodrigues
    • Alexandre M. Abrão

    Technical Paper 29 July 2017 Pages: 4069 - 4080

    

29. Parametric investigation of pulsating blank holder’s effect in deep drawing process of rectangular Al 1050 Cup

    • Saman Nezami
    • Amir Akbari
    • Sattar Ahangar

    Technical Paper 31 July 2017 Pages: 4081 - 4090

    

30. Unified recursive derivation and analysis of complex associated linkages with various links and type synthesis of complex robot mechanisms

    • Yi Lu
    • Nijia Ye
    • Lijie Zhang

    Technical Paper 26 April 2017 Pages: 4091 - 4106

    

31. Formal verification considering a systematic modeling approach for function blocks

    • José Machado
    • Joel Galvão
    • Alexandre Fernandes

    Technical Paper 22 August 2017 Pages: 4107 - 4113

    

32. Underwater radio frequency image sensor using progressive image compression and region of interest

    • Eduardo M. Rubino
    • Diego Centelles
    • Alberto J. Álvares

    Technical Paper 21 August 2017 Pages: 4115 - 4134

    

33. Water-alternating-macroemulsion reservoir simulation through capillary number-dependent modeling

    • Ranena V. Ponce F.
    • Vladimir Alvarado
    • Marcio S. Carvalho

    Technical Paper 12 August 2017 Pages: 4135 - 4145

    

34. Effect of pick working angle on the cutting performance of a cutting head

    • Songyong Liu
    • Huifu Ji
    • Xiaohui Liu

    Technical Paper 09 May 2017 Pages: 4147 - 4159

    

35. Historical measurement data reuse and similarity analysis for dimensional production tolerancing of injected plastic parts

    • Ademir Linhares de Oliveira
    • Gustavo Daniel Donatelli

    Technical Paper 16 August 2017 Pages: 4161 - 4175

    

36. An integral method for the boundary layer of MHD non-Newtonian power-law fluid in the entrance region of channels

    • Mohammad Hasan Taheri
    • Morteza Abbasi
    • Mehran Khaki Jamei

    Technical Paper 12 August 2017 Pages: 4177 - 4189

    

37. Multi-parameter optimization of magnetorheological fluid with high on-state yield stress and viscosity

    • S. K. Mangal
    • Vivek Sharma

    Technical Paper 17 August 2017 Pages: 4191 - 4206

    

38. Numerical study of non-Newtonian droplets electrocoalescence

    • Iman Zadeh Shabankareh
    • Seyed Mahmood Mousavi
    • Reza Kamali

    Technical Paper 04 September 2017 Pages: 4207 - 4217

    

39. Providing thermal comfort and saving energy inside the buildings using a ceiling fan in heating systems

    • Soroush Sadripour
    • Mahdi Mollamahdi
    • Mohammad Adibi

    Technical Paper 15 July 2017 Pages: 4219 - 4230

    

40. Assessing uncertainties in prevailing methodologies for modeling radiative transfer in simulations of oxygen-enriched methane flames

    • Gautham Krishnamoorthy

    Technical Paper 29 August 2017 Pages: 4231 - 4248

    

41. Retraction Note to: Theoretical research of self-excited oscillations in transmitters for auxiliary motion of a tool machine using a nonlinear model

    • Milan Cvetković
    • Slavica Cvetković

    Retraction Note 24 August 2017 Pages: 4249 - 4249