Online first articles
Articles not assigned to an issue 251 articles
-
-
Alkali-Processed Flax Natural Made High-Density Polyethylene Waste Recycled Composites: Performance Evaluation
Authors (first, second and last of 9)
- M. Aruna
- Jabihulla Shariff
- Vishal C. Reddy
- Content type: ORIGINAL CONTRIBUTION
- Published: 24 April 2024
-
Analysis of Lightweight Braking Material System for an ATV
Authors (first, second and last of 5)
- Mohan Poojari
- Harshitha Madhusoodan Jathanna
- Rolvin DSilva
- Content type: ORIGINAL CONTRIBUTION
- Published: 23 April 2024
-
Influence of Recycled Aggregates and Silica fumes on Compression and Split Tensile Strength of Composite Materials
Authors (first, second and last of 4)
- Rajshekhar Yergol
- Bhimarao S. Patil
- Ranjeet Kumar Choudhary
- Content type: ORIGINAL CONTRIBUTION
- Published: 22 April 2024
-
Effect of Brass Content and Speed of Cut on Machining Outcomes of Copper–2% Silver Alloy
Authors (first, second and last of 4)
- Mrudula Prashanth
- N. J. Krishna Prasad
- N. Satish
- Content type: ORIGINAL CONTRIBUTION
- Published: 22 April 2024
-
Study on the Characteristics of Novel Natural Fiber Extracted from Crescentia cujete Plant Fruits—An Alternate Reinforcement for Synthetic Materials
Authors
- Thandavamoorthy Raja
- Devarajan Yuvarajan
- Content type: ORIGINAL CONTRIBUTION
- Published: 22 April 2024
-
Harmonizing Blasting Efficiency: A Case Study on Evaluation and Optimization of Fragmentation Size and Ground Vibration
Authors (first, second and last of 5)
- M. Naresh
- N. Sri Chandrahas
- K. Sravan Kumar
- Content type: ORIGINAL CONTRIBUTION
- Published: 22 April 2024
-
Characterization and Mechanical Behaviour of Nano-Al2O3 Reinforced Polymer Composites
Authors
- K. S. Mahesh
- J. Satheesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 20 April 2024
-
Exploring the Tribo-corrosion Characteristics of Clay- and MgO-Reinforced Composites: A Comparative Study
Authors
- Shashi Prakash Dwivedi
- Manish Maurya
- Content type: ORIGINAL CONTRIBUTION
- Published: 18 April 2024
-
Impact of Silicon Carbide Particle on the Behavior of Coir Fiber-Incorporated Polypropylene Hybrid Composite
Authors (first, second and last of 7)
- M. Aruna
- S. Manivannan
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 18 April 2024
-
Chemical Processed Abaca Natural Fiber Prepared Epoxy Composites: Characteristics Evaluation
Authors (first, second and last of 9)
- M. Aruna
- Katragadda Sudhir Chakravarthy
- Mithun S. Gowda
- Content type: ORIGINAL CONTRIBUTION
- Published: 18 April 2024
-
Functional Evaluation of the Effect of ZrO2 Reinforcements on the Density, Microstructure, Strength and Hardness of Al–12 wt%Si Alloy Based Composites
Authors
- M. Nataraja
- G. Balakumar
- N. Santhosh
- Content type: ORIGINAL CONTRIBUTION
- Published: 18 April 2024
-
Improving Mechanical Characteristics of Polyamide Through Varying Weight Percentages of Carbon Fiber Composites for Fused Deposition Modeling
Authors
- A. Senthilkumar
- S. Muthukumaran
- K. Rajmohan
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 April 2024
-
Appraisal of Mechanical and Tribological Behaviour of Polyamide 6 with Carbon Fibre-Filled Composites Fabricated Through Fused Deposition Modelling
Authors
- R. Sharvesh
- M. Babu
- R. Soundararajan
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 April 2024
-
Toward Achieving Grain Refinement in Al2014 Alloy Through Multi-pass FSP: Microstructure and Mechanical Behavior
Authors (first, second and last of 8)
- Rajani Kanthreddy Kolagotla
- B. Vijay Krishna
- G. Naresh
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 April 2024
-
Multi Response Optimization of Cold Extrusion Parameters on AA 2024 Alloy Using TOPSIS
Authors
- K. Anupama Francy
- Ch. Srinivasa Rao
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 April 2024
-
Strength Prediction of Agro Waste Mixed Composites Using a Neural Network Regression Model
Authors
- H. R. Mahalingegowda
- B. K. Narendra
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 April 2024
-
Alkali Process Coir Natural Fiber Incorporated Epoxy Composite Made by Compression Mold Route: Characteristics Evaluation
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 15 April 2024
-
Assessment of Compacted Graphite Iron Viability for Cost-Effective Product Designing
Authors (first, second and last of 4)
- Mamta Patel
- Komal Dave
- Bharati R. Rehani
- Content type: ORIGINAL CONTRIBUTION
- Published: 15 April 2024
-
Examining the Impact of Metallurgical and Optimised Machining Parameters on Inconel 713C Superalloy Using the Taguchi Technique
Authors
- Vinayak P. Suryawanshi
- Prashant D. Deshmukh
- Yashwant Chapke
- Content type: ORIGINAL CONTRIBUTION
- Published: 15 April 2024
-
Synthesis of CNT Fiber with Different Stacking-made Polyester Composite via Compression Mold: Mechanical Behavior Study
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 15 April 2024
-
Investigations on Thermal, Wear Behavior and Condition Monitoring of Polylactic Acid (PLA)/Thermoplastic Polyurethane (TPU) Composite Gears Enhanced with Silica-Coated TiO2 (S-TiO2) Nanoparticles
Authors (first, second and last of 4)
- Arun Nethula
- Naga Sai Suman Koka
- Rohinikumar Chebolu
- Content type: ORIGINAL CONTRIBUTION
- Published: 15 April 2024
-
Synthesis and Behavior Study of Basalt Fiber-Made Low-Density Polyethylene Composites Via Injection Mold
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 14 April 2024
-
Processing and Fabrication of Hemp Natural Fiber-Blended Polypropylene Composite: Characteristics Study
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 14 April 2024
-
Hot Corrosion Behavior of Plasma Sprayed YSZ/Al2O3/CeO2 Thermal Barrier Coatings
Authors (first, second and last of 5)
- Amrinder Mehta
- Hitesh Vasudev
- Anup Kumar Keshri
- Content type: ORIGINAL CONTRIBUTION
- Published: 14 April 2024
-
Starch–Organo Layer Silicate Masterbatch Formulation in LLDPE–Starch–Clay Nanocomposite Processing: Changes in Transparency, Barrier, and Biodegradability
Authors (first, second and last of 5)
- Chandra Liza
- Syuhada
- Heru Santoso
- Content type: REVIEW PAPER
- Published: 14 April 2024
-
Excellence of Nano SiC on Mechanical Behaviour of Low Density Polyethylene Hybrid Nanocomposite
Authors (first, second and last of 9)
- Melvin Victor De Poures
- Katragadda Sudhir Chakravarthy
- V. Kishore Kumar
- Content type: ORIGINAL CONTRIBUTION
- Published: 14 April 2024
-
Development and Behavior Analysis of CNT Fibers Reinforced High-Density Polyethylene Composite via Compression Mold Route
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 13 April 2024
-
Significance of TiO2 on the Mechanical Behavior of High-Density Polyethylene Nanocomposite Made with Pineapple Fiber
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 13 April 2024
-
Effect of Boron Nitride on Mechanical Characteristics of LDPE Nanocomposite made with Ramie Fiber
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 13 April 2024
-
Synthesis of BNiO3 Nanocomposites for Photocatalytic Hydrogen Production Applications
Authors (first, second and last of 8)
- Ranjeet Kumar Choudhary
- G. N. Kumaraswamy
- Prakash Kumar
- Content type: ORIGINAL CONTRIBUTION
- Published: 13 April 2024
-
Heat Treatment Effects on Microstructure and Hardness of Low-Carbon AISI 1020 Steel
Authors (first, second and last of 5)
- P. Pavan Kumar Reddy
- Saurabh Dewangan
- Amrita Biswas
- Content type: ORIGINAL CONTRIBUTION
- Published: 12 April 2024
-
Effect of Self-Pouring Temperature on the Microstructural Characteristics of Al2O3-LM6 Semi-solid Cast Composite
Authors
- Devendra Pratap Singh
- Vijay Kumar Dwivedi
- Mayank Agarwal
- Content type: ORIGINAL CONTRIBUTION
- Published: 11 April 2024
-
Mechanical Properties of Hand Layup Manufactured Lightweight Sandwich Composites Consisting of Multilayer Carbon Fiber Skin-Reinforced Microballoon Core
Authors (first, second and last of 9)
- Yurohman
- Benni Ramadhoni
- Hosta Ardhyananta
- Content type: ORIGINAL CONTRIBUTION
- Published: 11 April 2024
-
Optimization of Process Parameters and Additives for Improved Part Quality in Sand Casting: An Overview
Authors (first, second and last of 7)
- Utkarsh Chadha
- Gurbaaz Singh Dhaliwal
- Won-Chol Yang
- Content type: REVIEW PAPER
- Published: 10 April 2024
-
Effect of Graphene and Coconut Shell Ash on Mechanical Properties of Al6061 Metal Matrix Composites
Authors (first, second and last of 8)
- Lohitesh Jaga Kumar
- Jagadeesh P. Ganjigatti
- G. R. Gurunagendra
- Content type: ORIGINAL CONTRIBUTION
- Published: 09 April 2024
-
Evaluation of the Reliability of Computational Fracture Mechanics Approaches for Compact Tension Specimen
Authors (first, second and last of 8)
- Syed Jabiulla
- L. J. Kirthan
- Habib Masum
- Content type: ORIGINAL CONTRIBUTION
- Published: 07 April 2024
-
Mechanical Properties and Microstructure Analysis of Al-6061 Metal Matrix Prepared with Alumina and Silicon Carbide Powders
Authors
- Saurabh Dewangan
- Parth Manak Bohra
- Puneet Sharma
- Content type: ORIGINAL CONTRIBUTION
- Published: 06 April 2024
-
Preparation of High-Density Polypropylene Composite Featured with Natural Neem Fiber Through Injection Mould Route
Authors
- R. Venkatesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 05 April 2024
-
Development and Analysis on Micro-Electrical Photovoltaic Model of Dye Sensitized Solar Cell for Optimized Performance
Authors (first, second and last of 4)
- Dickson Warepam
- Rudra Sankar Dhar
- Arindam Biswas
- Content type: ORIGINAL CONTRIBUTION
- Published: 05 April 2024
-
Optimization of Wear Strength of Stir-Cast ZA-27 Hybrid Composites Reinforced with Zirconium Silicate and MoS2 Powder
Authors (first, second and last of 6)
- G. R. Gurunagendra
- K. S. Anil Kumar
- Mahadeva Prasad
- Content type: ORIGINAL CONTRIBUTION
- Published: 05 April 2024
-
Effect of B4C Particles on CTE and Thermal Conductivity of Al2214/3Grp/xB4Cp Hybrid Metal Matrix Composites
Authors
- K. Revanna
- R. Suresh
- Content type: ORIGINAL CONTRIBUTION
- Published: 04 April 2024
-
Advancements in Friction Stir Welding: Microstructural and Mechanical Enhancement of AA6061-B4C Welded Composites
Authors (first, second and last of 5)
- P. Surendar Reddy
- V. S. N. Venkata Ramana
- Simhadri Raju Juvvala
- Content type: ORIGINAL CONTRIBUTION
- Published: 28 March 2024
-
Effects of W and Mo Concentrations on Mechanical Behaviour of Ni–B Based Coatings—A Comparative Study
Authors
- Manik Barman
- Tapan Kumar Barman
- Prasanta Sahoo
- Content type: ORIGINAL CONTRIBUTION
- Published: 28 March 2024
-
Optimization Process to Develop Tungsten Carbide Reinforced with Aluminium MMCs Using Surface Plots and ANN
Authors (first, second and last of 8)
- M. Arunadevi
- Chetan Patil
- Mahesh M. Kawade
- Content type: ORIGINAL CONTRIBUTION
- Published: 27 March 2024
-
Taguchi Analysis for Wear Characteristics of Al6063 Alloy–Zirconium Silicate Composites
Authors (first, second and last of 10)
- R. Vijaya Kumar
- M. M. Venugopal
- S. Udayashankar
- Content type: ORIGINAL CONTRIBUTION
- Published: 27 March 2024
-
Elevated Temperature Stress Analysis of Cobalt-Based Composite Cladding by Microwave Process on Gas Turbine Rotor Blade Using FEA
Authors (first, second and last of 8)
- Shanthala Kollur
- G. Veeresha
- Y. Madhavi
- Content type: ORIGINAL CONTRIBUTION
- Published: 26 March 2024
-
Synthesis and Functional Behavior of Sisal Fiber-Incorporated Epoxy Hybrid Nanocomposite Enriched by Nano-SiC
Authors (first, second and last of 6)
- R. Venkatesh
- A. Daniel Das
- Rajasekaran Shanmugam
- Content type: ORIGINAL CONTRIBUTION
- Published: 23 March 2024
-
Mechanical Properties and Microstructure of Ti–6Al–4V Alloy upon Exposure to High Heat and Chemical Quenching
Authors (first, second and last of 4)
- Saurabh Dewangan
- Avaneesh Rajesh Kulkarni
- P. Pavan Kumar Reddy
- Content type: ORIGINAL CONTRIBUTION
- Published: 23 March 2024
-
Optimization of Ultra-Thin Strip Rolling Process Parameters on Phosphor Bronze C5191 Using Grey Relational Analysis
Authors
- Narendra Varma Dantuluri
- Srinivasa Rao Chalamalasetti
- Lakshmi Poornima Chodagam
- Content type: ORIGINAL CONTRIBUTION
- Published: 23 March 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more