1. Insights into current directions of protein and peptide-based hydrogel drug delivery systems for inflammation

   • X. Janet Bertilla
   • S. Rupachandra

   Review Paper 28 October 2022 Pages: 9409 - 9436

   

2. Synergistic effect of agarose biopolymer gel electrolyte with modified TiO₂ for low-cost electrochemical device applications

   • Afzalina Badri
   • Sharin Razak
   • Amira Abul Shukor

   Original Paper 11 October 2022 Pages: 9437 - 9450

   

3. Synthesis, characterization, and application of polypyrrole/Fe₃O₄ nanocomposite for removal of Ni(II) ions from water and wastewaters

   • R. Ansari
   • Z. Esdaki
   • F. Ostovar

   Original Paper 11 October 2022 Pages: 9451 - 9464

   

4. Morphology and stress whitening in polypropylene at various strain rates

   • Mohammad F. Farahani
   • Reza Bagheri

   Original Paper 12 October 2022 Pages: 9465 - 9477

   

5. Optically transparent and thermally conductive composite films of α-alumina and highly refractive polyimide

   • Kimiyasu Sato
   • Yuichi Tominaga
   • Yusuke Imai

   Original Paper 12 October 2022 Pages: 9479 - 9488

   

6. Polyvinyl alcohol (PVA) nanofibre matrix encapsulated with tebuconazole fungicide: a smart delivery system against dry root rot disease of black gram

   • M. Latha
   • K. Raja
   • M. S. Kumuthan

   Original Paper 12 October 2022 Pages: 9489 - 9505

   

7. Evaluation of the effect of nanomaterials and fibers on the mechanical behavior of polymer-based nanocomposites using Box–Behnken response surface methodology

   • Meysam Nouri Niyaraki
   • Jaber Mirzaei
   • Hossein Taghipoor

   Original Paper 12 October 2022 Pages: 9507 - 9529

   

8. Comparative study of electronic, optoelectronic, optical, and thermodynamic properties of two ovalene molecules and their derivatives functionalized with potassium and chlorine atoms

   • Emmanuella Claudia Yibain Khokho
   • Fridolin Tchangnwa Nya
   • Jeanet Conradie

   Original Paper 13 October 2022 Pages: 9531 - 9567

   

9. Production and properties of the fibrillated plastic composite from recycled polystyrene and Luffa cylindrica

   • Adewale George Adeniyi
   • Sulyman A. Abdulkareem
   • Ridwan O. Belgore

   Original Paper 13 October 2022 Pages: 9569 - 9588

   

10. Performance analysis of polymer bulk heterojunction solar cells with plasmonic nanoparticles embedded into the P3HT:PC₆₁BM active layer using the FDTD method

    • Leila Shabani
    • Ahmad Mohammadi
    • Tahmineh Jalali

    Original Paper 14 October 2022 Pages: 9589 - 9610

    

11. Optical, electrical and chemical properties of PEO:I₂ complex composite films

    • Ahmad Telfah
    • Qais M. Al-Bataineh
    • Roland Hergenröder

    Original Paper Open access 14 October 2022 Pages: 9611 - 9625

    

12. Novel coating films containing micronutrients for controlled-release urea fertilizer: release mechanisms and kinetics study

    • Patharawadee Boonying
    • Sirinya Sottiudom
    • Wiyong Kangwansupamonkon

    Original Paper 17 October 2022 Pages: 9627 - 9649

    

13. Green-synthesized silver nanoparticle coating on paper for antibacterial and antiviral applications

    • Natwat Srikhao
    • Artjima Ounkaew
    • Pornnapa Kasemsiri

    Original Paper 17 October 2022 Pages: 9651 - 9668

    

14. Modification of silk fabrics with diallyldimethylammonium chloride

    • Nawaporn Chantawong
    • Boonsri Kusuktham

    Original Paper 20 October 2022 Pages: 9669 - 9684

    

15. Thermal degradation kinetics, mechanism, thermodynamics, shape memory properties and artificial neural network application study of polycaprolactone (PCL)/polyvinyl chloride (PVC) blends

    • Pınar Demir

    Original Paper 21 October 2022 Pages: 9685 - 9708

    

16. Ductile polylactic acid-based blend derived from bio-based poly(butylene adipate-co-butylene furandicarboxylate)

    • Guoqiang Wang
    • Li Zhang
    • Rubo Sun

    Original Paper 21 October 2022 Pages: 9709 - 9726

    

17. Preparation and flame retardance of polyethylene composites with microencapsulated resorcinol bis(diphenyl phosphate), red phosphorus and magnesium hydroxide

    • Chung-Guk Choe
    • Yong-Man Jang
    • Chol-Jun Yu

    Original Paper 23 October 2022 Pages: 9727 - 9744

    

18. Synthesis, characterization, antimicrobial and photocatalytic properties of nano-silver-doped flax fibers

    • Magda A. Akl
    • Mohammed A. Hashem
    • Aya G. Mostafa

    Original Paper Open access 24 October 2022 Pages: 9745 - 9777

    

19. Study of polyvinyl alcohol/polymalic acid hydrogel dressing pads incorporated with curcumin as chronic wound dressing

    • Weiqun Tan
    • Zhengfa Ma
    • Tiantao Zhao

    Original Paper 28 October 2022 Pages: 9779 - 9795

    

20. Preparation and evaluation of the antimicrobial activity of sodium alginate-grafted diphenylamine embedded with silver nanoparticles

    • Fatma Mohamed
    • Asmaa Ahmed
    • Omayma F. Abdel-Gawad

    Original Paper Open access 28 October 2022 Pages: 9797 - 9810

    

21. Preparation of reusable cross-linked amidoxime polyacrylonitrile microspheres and their efficient adsorption of Cu (II) and Pb (II)

    • Guohang Zhou
    • Jiexiang Zeng
    • Yan Wang

    Original Paper 29 October 2022 Pages: 9811 - 9831

    

22. Raft-forming gastroretentive tablets incorporating solidly dispersed Curcumin-Eudragit E100; in vitro and in vivo approaches for treatment of gastric ulcer

    • Muhammad Hanif
    • Nabeela Ameer
    • Hafiz Muhammad Abdur Rahman

    Original Paper 29 October 2022 Pages: 9833 - 9851

    

23. Synthesis, characterization and affinity detection of sulfonated polyimides: confirmation of proton transfer in quantum theory simulations

    • Aslihan Aycan Tanriverdi
    • Umit Yildiko
    • Ahmet Cagri Ata

    Original Paper 29 October 2022 Pages: 9853 - 9880

    

24. The influence of alkyl groups at ortho-position of amino group on the structure and properties of polyimides

    • Yixin Zhao
    • Mingliang Wang
    • Shengpei Su

    Original Paper 30 October 2022 Pages: 9881 - 9897

    

25. Facile synthesis of graphene sand composite from asphalt as an effective adsorbent for chromium ions in aqueous media

    • Omnia A. A. El-Shamy
    • Ibrahim M. Nassar
    • A. A. Ragab

    Original Paper 31 October 2022 Pages: 9899 - 9911

    

26. Interpenetrating network nanocomposite hydrogels as efficient adsorbents for the removal of total impurities from industrial lean methyldiethanolamine solution

    • Anjali Achazhiyath Edathil
    • Israa Othman
    • Fawzi Banat

    Original Paper 31 October 2022 Pages: 9913 - 9939

    

27. The formulation and microstructural, rheological, and textural characterization of salep-xanthan gum-based liposomal gels

    • Oznur Saroglu
    • Ayse Karadag
    • Salih Karasu

    Original Paper 01 November 2022 Pages: 9941 - 9962

    

28. Ultrasound-mediated pectin extraction from pseudostem waste of Musa balbisiana: a resource from banana debris

    • Mira Chares Subash
    • Muthiah Perumalsamy

    Original Paper 01 November 2022 Pages: 9963 - 9987

    

29. Formulation of promising antibacterial, anticancer, biocompatible and bioactive biomaterial as therapeutic drug delivery system for biologically active compound loaded on clay polymer

    • H. A. Fetouh
    • H. Abdel-Hamid
    • A. M. Ismail

    Original Paper Open access 01 November 2022 Pages: 9989 - 10013

    

30. Synthesis of bis(thiophen-2-yl)benzothiadiazole scaffold donor-acceptor polymers: studies of polymerization, electrical, optical, and photovoltaic properties

    • Anamika Mishra
    • Sonal Gupta
    • Asit Patra

    Original Paper 02 November 2022 Pages: 10015 - 10029

    

31. Preparation and properties of thermo-expandable microcapsules with anionic/nonionic waterborne polyurethane as the shell

    • Lingchen Zhang
    • Jian Li
    • Qiang Ren

    Original Paper 03 November 2022 Pages: 10031 - 10049

    

32. Synthesis of melamine-isocyanurate-based hyper-cross-linked resin for ultrahigh removal of chlorophenols from aqueous solutions

    • Muhammad Mansha
    • Muhammad Ilyas
    • Mazen K. Nazal

    Original Paper 03 November 2022 Pages: 10051 - 10071

    

33. Characterization of swelling behavior and elastomer properties of acrylate polymers containing 2-ethylhexyl and isobornyl esters

    • Merah Dounya
    • Ulrich Maschke
    • Lamia Bedjaoui-Alachaher

    Original Paper 07 November 2022 Pages: 10073 - 10098

    

34. Poly(AA-co-NVIm-co-AAm) sensor hydrogels for the simultaneous visual detection and removal of Cu²⁺ ions from aqueous media

    • Roshni D. Hingrajiya
    • Anirudhdha G. Kalola
    • Manish P. Patel

    Original Paper 07 November 2022 Pages: 10099 - 10124

    

35. Self-healing castor oil-based polyurethane networks featuring cyclodextrin–adamantane host–guest interactions

    • Takumi Sekiya
    • Mitsuhiro Shibata

    Original Paper 07 November 2022 Pages: 10125 - 10138

    

36. Adsorption behavior of tannic acid on polyethylenimine-modified montmorillonite with different morphologies

    • Ruan R. Henriques
    • Ana Lucia Shiguihara
    • Jorge Amim Jr

    Original Paper 07 November 2022 Pages: 10139 - 10163

    

37. Polyvinyl alcohol/guar gum-based bio-adsorbent for the removal of cationic and anionic dyes from aqueous solution

    • Sabarish Radoor
    • Jasila Karayil
    • Suchart Siengchin

    Original Paper 08 November 2022 Pages: 10165 - 10191

    

38. Influence of surface-modified cellulose nanocrystal on the rheological, thermal and mechanical properties of PLA nanocomposites

    • Jorge Uribe-Calderón
    • Denis Rodrigue
    • Soledad Cecilia Pech-Cohuo

    Original Paper 09 November 2022 Pages: 10193 - 10213

    

39. Synthesis and physicochemical properties of (co)polymers based on aniline and its ortho-cycloalkenyl-substituted derivatives

    • Anastasiia Andriianova
    • Akhat Mustafin

    Original Paper 10 November 2022 Pages: 10215 - 10230

    

40. Recycling rice husk ash as a filler on biodegradable cassava starch-based foams

    • Nicoly Donati
    • Jordana Corralo Spada
    • Isabel Cristina Tessaro

    Original Paper 10 November 2022 Pages: 10231 - 10248

    

41. Novel amphiphilic A₂B₂ type miktoarm star polymer with disulfide bonds based on PEG and PCL: micellization study

    • Abbas Rezaei
    • Hossein Behniafar

    Original Paper 11 November 2022 Pages: 10249 - 10261

    

42. In situ preparation of silver nanoparticle embedded composite nanofibrous membrane: a multi-layered biocidal air filter

    • Gobi Nallathambi
    • Berly Robert

    Original Paper 11 November 2022 Pages: 10263 - 10287

    

43. Development of biodegradable biocomposite films from poly(lactic acid), natural rubber and rice straw

    • Wachirabhorn Pongputthipat
    • Yupaporn Ruksakulpiwat
    • Pranee Chumsamrong

    Original Paper 12 November 2022 Pages: 10289 - 10307

    

44. Study and development of electrospun (TPU, PA-6) / silicone bilayer membranes for congenital diaphragmatic hernia repair

    • Elham Mohsenzadeh
    • Nabyl Khenoussi
    • Laurence Schacher

    Original Paper 12 November 2022 Pages: 10309 - 10333

    

45. Synthesis and characterization of starch stabilized polyvinyl acetate-acrylic acid copolymer-based wood adhesive

    • Ravindra V. Gadhave
    • S. K. Vineeth

    Original Paper 12 November 2022 Pages: 10335 - 10354

    

46. Fabrication of chitosan-based interpenetrating network hydrogel via sequential amino-maleimide click reaction and photopolymerization in water

    • Yin Zeng
    • Shijiao Hou
    • Yue Yin

    Original Paper 14 November 2022 Pages: 10355 - 10378

    

47. Blue light-emitting fluorene–dendron hybridized polymers: optophysical features

    • Rupashri K. Kadu
    • Pramod B. Thakur
    • Amol V. Pansare

    Original Paper Open access 16 November 2022 Pages: 10379 - 10392

    

48. Composite fabrication and characterization of crosslinked polyaniline/Pterocladia capillacea-activated carbon for adsorption of direct blue-86 dye from water

    • Amany G. M. Shoaib
    • Ahmed El Nemr
    • Amany El Sikaily

    Original Paper Open access 16 November 2022 Pages: 10393 - 10428

    

49. Optimization and evaluation of instant release buccal films of eletriptan: a quality-by-design approach

    • Qurat ul Ain
    • Muhammad Zaman
    • Omer Salman Qureshi

    Original Paper 17 November 2022 Pages: 10429 - 10455

    

50. Bio-based trifunctional diphenolic acid epoxy resin with high T_g and low expansion coefficient: synthesis and properties

    • Junji Wei
    • Yajun Duan
    • Jiamin Qi

    Original Paper 17 November 2022 Pages: 10457 - 10471