1. Hydrogels and biohydrogels: investigation of origin of production, production methods, and application

   • Sajad Pirsa
   • Seyedeh Mahsa Khodaei
   • Hadi Eghbaljoo

   REVIEW PAPER 19 November 2022 Pages: 10593 - 10632

   

2. The evolution of the global COVID-19 epidemic in Morocco and understanding the different therapeutic approaches of chitosan in the control of the pandemic

   • Youssef Ait Hamdan
   • Fatima El Amerany
   • Mohammed Rhazi

   REVIEW PAPER 21 November 2022 Pages: 10633 - 10659

   

3. Polyamide (PA)- and Polyimide (PI)-based membranes for desalination application

   • Yash Avinash Ghodke
   • Neelaambhigai Mayilswamy
   • Balasubramanian Kandasubramanian

   Review Paper 24 November 2022 Pages: 10661 - 10695

   

4. Polymeric organic–inorganic C₃N₄/ZnO high-performance material for visible light photodegradation of organic pollutants

   • Roya Mohammadzadeh Kakhki

   Review Paper 24 November 2022 Pages: 10697 - 10717

   

5. Physical–chemical characterization of PMMA-based hip implant centralizer and spacer: evaluation of monomers and impurities screening

   • Izabelle de M. Gindri
   • Lucas K. de Azambuja
   • Carlos R. de M. Roesler

   Original Paper 18 November 2022 Pages: 10719 - 10732

   

6. Poly(acrylamide-co-acrylic acid)-based gel polymer electrolytes incorporated with sodium iodide for dye-sensitized solar cells (DSSCs)

   • N. R. Elizer
   • N. K. Farhana
   • V. Sethuprakhash

   Original Paper 18 November 2022 Pages: 10733 - 10749

   

7. Polymer electrolyte based on guar gum and ammonium thiocyanate for proton battery application

   • K. Venkatesh
   • I. Jenova
   • S. Nithya

   Original Paper 19 November 2022 Pages: 10751 - 10773

   

8. Process optimization and characterization of composite biopolymer films obtained from fish scale gelatin, agar and chitosan using response surface methodology

   • Parthiban Fathiraja
   • Sugumar Gopalrajan
   • Chinnapiyan Vedhi‬

   Original Paper 20 November 2022 Pages: 10775 - 10807

   

9. Bioactive films for the control of skin pathogens with sophorolipids from Starmerella bombicola

   • Giovanna Amaral Filipe
   • Victoria Akemi Itakura Silveira
   • Maria Antonia P. Colabone Celligoi

   Original Paper 21 November 2022 Pages: 10809 - 10823

   

10. Synthesis and characterization of multi-responsive poly(N-isopropylacrylamide)-sodium alginate-graphene oxide composite hydrogels

    • Yiqiang Zhang
    • Fuguo Yang
    • Xianghua Yu

    ORIGINAL PAPER 21 November 2022 Pages: 10825 - 10842

    

11. Green synthesis of AgNO₃/glutathione nanoparticles by Eucalyptus Globulus extracts as a novel nanocarrier for using as drug delivery system: study of nonlinear isotherms and kinetics

    • Ali Esmaeili
    • Elham Moniri
    • Homayon Ahmad Panahi

    ORIGINAL PAPER 22 November 2022 Pages: 10843 - 10861

    

12. Structural properties of HPMC/PEG/CS thermosensitive porous hydrogels

    • Li Ma
    • Tong Shi
    • Xiong Zhang

    Original Paper 23 November 2022 Pages: 10863 - 10880

    

13. Highly carbonized Prunus dulcis shell-derived activated carbon for high-performance supercapacitor applications

    • Senthil Kumar Kandasamy
    • Ramyea Ravindaran
    • Mustafa Musa Jaber

    Original Paper 23 November 2022 Pages: 10881 - 10894

    

14. Thermal conductivity of epoxy composites modified by microspheric molybdenum disulfide

    • Zhen Liu
    • Yuan Jia
    • Ruifeng Shi

    ORIGINAL PAPER 24 November 2022 Pages: 10895 - 10906

    

15. Ibuprofen-loaded UHMWPE for orthopedics applications: preliminary evaluation of mechanical and biological properties

    • Izabelle de Mello Gindri
    • Loise Silveira da Silva
    • Carlos Rodrigo de Mello Roesler

    ORIGINAL PAPER 24 November 2022 Pages: 10907 - 10919

    

16. Assessment of acute oral toxicity of quercetin loaded alginate/chitosan nanoparticles: in vivo study

    • T. Nalini
    • S. Khaleel Basha
    • V. Sugantha Kumari

    ORIGINAL PAPER 24 November 2022 Pages: 10921 - 10937

    

17. Facile synthesis of β-cyclodextrin-cyclophosphamide complex-loaded hydrogel for controlled release drug delivery

    • Nadiah Zafar
    • Asif Mahmood
    • Sidra Mehr

    ORIGINAL PAPER 24 November 2022 Pages: 10939 - 10971

    

18. Polymeric nanoparticles tryptophan-graft-p(HEMA): a study on synthesis, characterization, and toxicity

    • Cem Guler
    • Suleyman Gulcemal
    • N. Ulku Karabay Yavasoglu

    ORIGINAL PAPER 27 November 2022 Pages: 10973 - 10996

    

19. Fabrication and characterization of hydroxyapatite-strontium/polylactic acid composite for potential applications in bone regeneration

    • Ayodeji Nathaniel Oyedeji
    • David Olubiyi Obada
    • Jakub Veverka

    Original Paper 27 November 2022 Pages: 10997 - 11014

    

20. Mechanical and dielectric properties of ECR-glass/polyimide-based composites

    • V. E. Ogbonna
    • A. P. I. Popoola
    • S. O. Adeosun

    ORIGINAL PAPER 27 November 2022 Pages: 11015 - 11029

    

21. Synthesis of copper oxide nanoparticles embedded in porous chitosan membrane for photodegradation of organic dyes

    • Zulfiqar Ali Raza
    • Aatika Mobeen
    • Muhammad Irfan Majeed

    ORIGINAL PAPER 27 November 2022 Pages: 11031 - 11047

    

22. Removal of methylene blue dye from aqueous solution using pure talc and polyacrylamide–talc composite: isotherms, kinetic and thermodynamic studies

    • Mehmet Bilgiç
    • Selçuk Şimşek
    • Zeynep Mine Şenol

    ORIGINAL PAPER 27 November 2022 Pages: 11049 - 11067

    

23. Performance and degradation analysis of HTV-SiR polymeric composites under the influence of bipolar DC voltages along with multiple stresses

    • Atif Mahmood
    • Shahid Alam

    ORIGINAL PAPER 27 November 2022 Pages: 11069 - 11089

    

24. Investigation of the physico-mechanical and moisture management properties of chemically treated cotton fabrics

    • Pratikhya Badanayak
    • Jyoti V. Vastrad

    ORIGINAL PAPER 27 November 2022 Pages: 11091 - 11106

    

25. Activated porous carbon derived from ethynyl phenyl azo phenol-biphenylene resin for high-performance supercapacitor

    • Xingguo Deng
    • Jingchao Li
    • Yujing Li

    ORIGINAL PAPER 27 November 2022 Pages: 11107 - 11119

    

26. Effect of additives on fabrication and properties of hydroxypropyl methylcellulose-based hydrogels

    • Ha N. Giang
    • Anh T. K. Le
    • Wataru Sakai

    ORIGINAL PAPER 27 November 2022 Pages: 11121 - 11137

    

27. Functionalization of the magnetic chitosan support with dipyridylamine as a nitrogen-rich pincer ligand for Pd immobilization and investigation of catalytic efficiency in Sonogashira coupling

    • F. Rafiee
    • M. Rezaee

    ORIGINAL PAPER 28 November 2022 Pages: 11139 - 11154

    

28. Spectroscopic characterization, thermal, and flame retarding properties of melaminium cyanoacetate monohydrate

    • Bhawani Sigdel Regmi
    • Allen Apblett

    ORIGINAL PAPER 29 November 2022 Pages: 11155 - 11166

    

29. An ecologically sustainable specific method using new magnetic alginate-biochar from acorn cups (Quercus coccifera L.) for decolorization of dyes

    • Şerife Parlayıcı
    • Erol Pehlivan

    ORIGINAL PAPER 29 November 2022 Pages: 11167 - 11191

    

30. On the evaluation of viscoelastic response of aged PLA/bagasse bio-composites

    • Heitor Luiz Ornaghi Jr.
    • Roberta Motta Neves
    • Francisco Maciel Monticeli

    ORIGINAL PAPER 29 November 2022 Pages: 11193 - 11205

    

31. Electrical conductivity of carbon ash surface immersed with nanoparticles (Co₃O₄-Cr₂O₃) for spectroscopic selective surfaces

    • Rasheed N. Abed
    • Abdul Rahman N. Abed
    • Aqeela N. Abed

    ORIGINAL PAPER 30 November 2022 Pages: 11207 - 11224

    

32. 3D heterometallic complex: photocatalytic property and preventive effect on osteoporosis by activating wnt signaling pathway

    • Rui Zhao
    • Tao Li

    ORIGINAL PAPER 30 November 2022 Pages: 11225 - 11234

    

33. A sandwich electrospun nanofibers/Tragacanth hydrogel composite containing Aloe vera extract and silver sulfadiazine as a wound dressing

    • Hosna Alvandi
    • Mehdi Jaymand
    • Elham Arkan

    ORIGINAL PAPER 30 November 2022 Pages: 11235 - 11248

    

34. Physical–chemical and biological properties of novel resin-based composites for dental applications

    • Zuzanna Buchwald
    • Mariusz Sandomierski
    • Adam Voelkel

    ORIGINAL PAPER Open access 30 November 2022 Pages: 11249 - 11272

    

35. Antimicrobial activity enhancement of PVA/chitosan films with the additive of CZTS quantum dots

    • Seda Ceylan
    • Rıdvan Küçükosman
    • Kasim Ocakoglu

    ORIGINAL PAPER 30 November 2022 Pages: 11273 - 11293

    

36. Use of Ricinus communis shredded material as filler in rotational molded parts to improve the bio-disintegration behavior

    • Francisco Romero
    • Zaida Ortega
    • Luis Suárez

    ORIGINAL PAPER Open access 30 November 2022 Pages: 11295 - 11316

    

37. Effects of SWCNT content on the electrospinning behavior and structure formation of a PVDF/SWCNT composite web

    • Jhwan Lim
    • Hansol Park
    • Han Seong Kim

    ORIGINAL PAPER 01 December 2022 Pages: 11317 - 11327

    

38. Fabrication and cytotoxicity evaluation of polyethyleneimine conjugated fluorescent MXene nanosheets as cancer theranostics agent

    • Barkha Singh
    • Rohan Bahadur
    • Rohit Srivastava

    ORIGINAL PAPER 01 December 2022 Pages: 11329 - 11342

    

39. Organic acid and amino acid coated multi-nutrient fertilizer granules (MNFG): synthesis and characterization

    • Rukmani Narayanasamy
    • Chitdeshwari Thiyagarajan
    • Marimuthu Subramanian

    ORIGINAL PAPER 01 December 2022 Pages: 11343 - 11362

    

40. Biodegradation of PLA/CNC composite modified with non-ionic surfactants

    • Gelsoneide da Silva Gois
    • Amélia Severino Ferreira Santos
    • Yeda Medeiros Bastos Almeida

    ORIGINAL PAPER 01 December 2022 Pages: 11363 - 11377

    

41. The incorporation of polypyrrole (PPy) in CS/PVA composite films to enhance the structural, optical, and the electrical conductivity

    • I. S. Elashmawi
    • A. M. Ismail
    • A. M. Abdelghany

    ORIGINAL PAPER Open access 01 December 2022 Pages: 11379 - 11399

    

42. Tuning the release rate of rilpivirine from PLGA-based in situ forming implants

    • Yulia Ulianova
    • Yulia Ermolenko
    • Svetlana Gelperina

    ORIGINAL PAPER 01 December 2022 Pages: 11401 - 11420

    

43. Blending HDPE with biodegradable polymers using modified natural rubber as a compatibilizing agent: mechanical, physical, chemical, thermal and morphological properties

    • Chanon Wiphanurat
    • Pran Hanthanon
    • Tarinee Nampitch

    ORIGINAL PAPER 01 December 2022 Pages: 11421 - 11437

    

44. Fabrication of conductive hybrid scaffold based on polyaniline/polyvinyl alcohol–chitosan nanoparticles for skin tissue engineering application

    • D. Switha
    • S. Khaleel Basha
    • V. Sugantha Kumari

    ORIGINAL PAPER 01 December 2022 Pages: 11439 - 11467