Volume 77, Issue 7

Search all Polymer Bulletin articles

July 2020

31 articles in this issue

Effective degradation of rhodamine B and Congo red dyes over biosynthesized silver nanoparticles-imbibed carboxymethyl cellulose hydrogel
Saruchi
Vaneet Kumar
Original Paper 24 August 2019 Pages: 3349 - 3365
Nanocomposite membranes based on sodium alginate/poly(ε-caprolactone)/graphene oxide for methanol, ethanol and isopropanol dehydration via pervaporation
Shafagh Mokhtarzadeh
Farahman Hakimpour
Yaghoub Mansourpanah
Original Paper 24 August 2019 Pages: 3367 - 3387
Development of antistatic packaging of polyamide 6/linear low-density polyethylene blends-based carbon black composites
Leonardo Nishiguti Silva
Erick Gabriel Ribeiro dos Anjos
Fabio Roberto Passador
Original Paper 24 August 2019 Pages: 3389 - 3409
Thin film nanocomposite nanofiltration hollow fiber membrane fabrication and characterization by electrochemical impedance spectroscopy
Gulsum Melike Urper-Bayram
Burcu Sayinli
Ismail Koyuncu
Original Paper 24 August 2019 Pages: 3411 - 3427
Enhanced cryogenic mechanical properties and liquid oxygen compatibility of DOPO-containing epoxy resin reinforced by epoxy-grafted polysiloxane
Jia-Liang Li
Chao Wang
Ke-Yu Lu
Original Paper 24 August 2019 Pages: 3429 - 3442
DFT study of the application of polymers cellulose and cellulose acetate for adsorption of metal ions (Cd²⁺, Cu²⁺ and Cr³⁺) potentially toxic
Davi Texeira Reis
Igor Hernandes Santos Ribeiro
Douglas Henrique Pereira
Original Paper 26 August 2019 Pages: 3443 - 3456
Preparation and characterization of silica nanoparticles from sugarcane bagasse ash for using as a filler in natural rubber composites
Anupong Boonmee
Kasama Jarukumjorn
Original Paper 26 August 2019 Pages: 3457 - 3472
The application of green synthesis of metal oxide nanoparticles embedded in polyethylene terephthalate nanofibers in the study of the photocatalytic degradation of methylene blue
Suhad A. Yasin
Jamal A. Abbas
Idrees H. Ahmed
Original Paper 26 August 2019 Pages: 3473 - 3484
p-Phenylenediamine-grafted multi-walled carbon nanotubes as a hydrophilic modifier in thin-film nanocomposite membrane
Mohammad Shokouhian
Sina Solouki
Original Paper 26 August 2019 Pages: 3485 - 3498
A mechanistic approach for the modulation of band gap of nanopolyaniline using various heterogeneous carbon nanostructures
Gaurav Kumar
Jyoti Prakash Singh
Pradip K. Maji
Original Paper 26 August 2019 Pages: 3499 - 3521
The effect of palm oil fuel ash (POFA) and polyvinyl alcohol (PVA) on the physico-mechanical, thermal and morphological properties of hybrid bio-composites
Md. Rezaur Rahman
Sinin Hamdan
Fahmi Asyadi Bin Md Yusof
Original Paper 27 August 2019 Pages: 3523 - 3535
Transitory rheological test as a tool to monitor nano-clay dispersion and distribution in polypropylene–palygorskite composites
J. F. Chi-Caballero
R. R. Perez-Matu
P. I. Gonzalez-Chi
Original Paper 28 August 2019 Pages: 3537 - 3562
Suspension of poly(o-toluidine)-coated silica-based core–shell-structured composite in silicone oil: fabrication and rheological properties at different external electric field strengths
Quang-Vu Bach
Cuong Manh Vu
Dinh Duc Nguyen
Original Paper 28 August 2019 Pages: 3563 - 3576
Anticorrosive property of hexafunctional epoxy polymer HGTMDAE for E24 carbon steel corrosion in 1.0 M HCl: gravimetric, electrochemical, surface morphology and molecular dynamic simulations
Rachid Hsissou
Bouchra Benzidia
Ahmed Elharfi
Original Paper 29 August 2019 Pages: 3577 - 3601
Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance
Almabrok A. Ashor
Marija M. Vuksanović
Radmila Jančić Heinemann
Original Paper 30 August 2019 Pages: 3603 - 3620
Study of mechanical, enzymatic degradation and antimicrobial properties of poly(butylene succinate)/pine-resin blends
Robert Chang
Roselyn Lata
David Rohindra
Original Paper 30 August 2019 Pages: 3621 - 3635
Dissolution of lignocellulosic biopolymers in ethanolamine-based protic ionic liquids
Rafael M. Dias
Filipe H. B. Sosa
Mariana C. da Costa
Original Paper 31 August 2019 Pages: 3637 - 3656
Improvement of antibacterial and biocompatibility properties of electrospray biopolymer films by ZnO and MCM-41
Esra Cansever Mutlu
Arzu Birinci Yıldırım
Arzu Demir
Original Paper 03 September 2019 Pages: 3657 - 3675
Evaluation of mechanical and thermal properties and creep behavior of micro- and nano-CaCO₃ particle-filled HDPE nano- and microcomposites produced in large scale
Harun Sepet
Bulent Aydemir
Necmettin Tarakcioglu
Original Paper 03 September 2019 Pages: 3677 - 3695
Investigation on hydrogen sensing property of MWCNT/Pani nanocomposite films
Nastaran Bafandeh
Madjid Mojtahedzadeh Larijani
Azizollah Shafiekhani
Original Paper 03 September 2019 Pages: 3697 - 3706
Synthesis and characterization of electroactive bottlebrush nano-copolymers based on polystyrene and polyaniline as side chains and poly(3-(2-hydroxyethyl)thiophene) as backbone
Bakhshali Massoumi
Nafiseh Sorkhishams
Samira Agbolaghi
Original Paper 04 September 2019 Pages: 3707 - 3724
Piezoresistive epoxy resin films with carbon black particles for small-strain sensors
Dionatas Hoffmann Andreghetto
Gilberto de Campos Fuzari Jr.
Original Paper 04 September 2019 Pages: 3725 - 3734
The synthesis of sulfonated polyethersulfone (SPES) and the preparation of its membranes as matrix in the immobilization of Candida antarctica lipase B (Cal-B)
Khusna Widhyahrini
Nurrahmi Handayani
Cynthia Linaya Radiman
Original Paper 06 September 2019 Pages: 3735 - 3748
Permeation characterization and modelling of polyethylene/clay nanocomposites for packaging
Yasir Qayyum Gill
Mo Song
Umer Abid
Original Paper 07 September 2019 Pages: 3749 - 3765
Effect of morphology alteration on mechanical properties and fracture toughness of polypropylene/polyamide 6/ethylene polypropylene diene monomer graft maleic anhydride (PP/PA6/EPDM-g-MA) reactive ternary blends
M. Hasanpour
M. K. Razavi Aghjeh
B. Afsari
Original Paper 07 September 2019 Pages: 3767 - 3794
Mono-/competitive adsorption of cadmium(II) and lead(II) using straw/bentonite-g-poly(acrylic acid-co-acrylamide) resin
Zhonghua Wang
Wei Zhou
Liang Zhu
Original Paper 07 September 2019 Pages: 3795 - 3811
Impact and thermal analysis of heat-treated and untreated mangrove wood/high-density polyethylene composites
Ganiyat Olusola Adebayo
Aziz Hassan
Lawrence Ekebafe
Original Paper 10 September 2019 Pages: 3813 - 3829
RAFT polymerization of styrene mediated by naphthyl-functionalized trithiocarbonate RAFT agents
Gabriel J. Summers
Thembinkosi S. Mdletshe
Carol A. Summers
Original Paper 25 November 2019 Pages: 3831 - 3851
Fabrication of nanofibers using fibroin regenerated by recycling waste silk selvage
Hoik Lee
Seon Ju Park
Kyu Beom Kim
Original Paper 22 January 2020 Pages: 3853 - 3862
Correction to: A simplified equation of state for polymer melts from perturbed Yukawa hard-sphere chain
S. M. Hosseini
M. M. Papari
J. Moghadasi
Correction 24 August 2019 Pages: 3863 - 3864
Nanoparticle opsonization: forces involved and protection by long chain polymers
Taha Umair Wani
Syed Naiem Raza
Nisar Ahmad Khan
Review Paper 09 September 2019 Pages: 3865 - 3889

Volume 77, Issue 7

Effective degradation of rhodamine B and Congo red dyes over biosynthesized silver nanoparticles-imbibed carboxymethyl cellulose hydrogel

Nanocomposite membranes based on sodium alginate/poly(ε-caprolactone)/graphene oxide for methanol, ethanol and isopropanol dehydration via pervaporation

Development of antistatic packaging of polyamide 6/linear low-density polyethylene blends-based carbon black composites

Thin film nanocomposite nanofiltration hollow fiber membrane fabrication and characterization by electrochemical impedance spectroscopy

Enhanced cryogenic mechanical properties and liquid oxygen compatibility of DOPO-containing epoxy resin reinforced by epoxy-grafted polysiloxane

DFT study of the application of polymers cellulose and cellulose acetate for adsorption of metal ions (Cd²⁺, Cu²⁺ and Cr³⁺) potentially toxic

Preparation and characterization of silica nanoparticles from sugarcane bagasse ash for using as a filler in natural rubber composites

The application of green synthesis of metal oxide nanoparticles embedded in polyethylene terephthalate nanofibers in the study of the photocatalytic degradation of methylene blue

p-Phenylenediamine-grafted multi-walled carbon nanotubes as a hydrophilic modifier in thin-film nanocomposite membrane

A mechanistic approach for the modulation of band gap of nanopolyaniline using various heterogeneous carbon nanostructures

The effect of palm oil fuel ash (POFA) and polyvinyl alcohol (PVA) on the physico-mechanical, thermal and morphological properties of hybrid bio-composites

Transitory rheological test as a tool to monitor nano-clay dispersion and distribution in polypropylene–palygorskite composites

Suspension of poly(o-toluidine)-coated silica-based core–shell-structured composite in silicone oil: fabrication and rheological properties at different external electric field strengths

Anticorrosive property of hexafunctional epoxy polymer HGTMDAE for E24 carbon steel corrosion in 1.0 M HCl: gravimetric, electrochemical, surface morphology and molecular dynamic simulations

Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance

Study of mechanical, enzymatic degradation and antimicrobial properties of poly(butylene succinate)/pine-resin blends

Dissolution of lignocellulosic biopolymers in ethanolamine-based protic ionic liquids

Improvement of antibacterial and biocompatibility properties of electrospray biopolymer films by ZnO and MCM-41

Evaluation of mechanical and thermal properties and creep behavior of micro- and nano-CaCO₃ particle-filled HDPE nano- and microcomposites produced in large scale

Investigation on hydrogen sensing property of MWCNT/Pani nanocomposite films

Synthesis and characterization of electroactive bottlebrush nano-copolymers based on polystyrene and polyaniline as side chains and poly(3-(2-hydroxyethyl)thiophene) as backbone

Piezoresistive epoxy resin films with carbon black particles for small-strain sensors

The synthesis of sulfonated polyethersulfone (SPES) and the preparation of its membranes as matrix in the immobilization of Candida antarctica lipase B (Cal-B)

Permeation characterization and modelling of polyethylene/clay nanocomposites for packaging

Effect of morphology alteration on mechanical properties and fracture toughness of polypropylene/polyamide 6/ethylene polypropylene diene monomer graft maleic anhydride (PP/PA6/EPDM-g-MA) reactive ternary blends

Mono-/competitive adsorption of cadmium(II) and lead(II) using straw/bentonite-g-poly(acrylic acid-co-acrylamide) resin

Impact and thermal analysis of heat-treated and untreated mangrove wood/high-density polyethylene composites

RAFT polymerization of styrene mediated by naphthyl-functionalized trithiocarbonate RAFT agents

Fabrication of nanofibers using fibroin regenerated by recycling waste silk selvage

Correction to: A simplified equation of state for polymer melts from perturbed Yukawa hard-sphere chain

Nanoparticle opsonization: forces involved and protection by long chain polymers

Navigation