Volume 54, Issue 1

Search all Heat and Mass Transfer articles

January 2018

Filter by

Volume:

Sort by

Date published:

New to old Old to new

20 articles in this issue

Water freezing at outdoor temperatures higher than 0 °C by the effect of radiative cooling
M. Sugawara
M. Tago
H. Beer
Original 06 July 2017 Pages: 1 - 6
Effect of different arrangements of sector on the performance of desiccant wheel
Laxmikant Yadav
Avadhesh Yadav
Original Article 06 July 2017 Pages: 7 - 23
A revised correlation based on heat transfer model of slug flow in mini/micro-channels
Xuejiao Li
Li Jia
Zhoujian An
Original 07 July 2017 Pages: 25 - 36
Simulation of non-Newtonian oil-water core annular flow through return bends
Fan Jiang
Ke Wang
Fei Duan
Original 08 July 2017 Pages: 37 - 48
Determination of heat capacity of ionic liquid based nanofluids using group method of data handling technique
Maryam Sadi
Original 10 July 2017 Pages: 49 - 57
Artificial neural network modeling of a deflector in a grooved channel as well as optimization of its effective parameters
Azita Abdollahi
Mehrzad Shams
Anita Abdollahi
Original 11 July 2017 Pages: 59 - 68
A numerical study of the supercritical CO₂ plate heat exchanger subject to U-type, Z-type, and multi-pass arrangements
Chen-Xi Zhu
Chi-Chuan Wang
Original 13 July 2017 Pages: 69 - 79
Dryout-type critical heat flux in vertical upward annular flow: effects of entrainment rate, initial entrained fraction and diameter
Zan Wu
Vishwas Wadekar
Bengt Sunden
Original Open access 14 July 2017 Pages: 81 - 90
Analysis of key factors influencing the evaporation performances of an oriented linear cutting copper fiber sintered felt
Minqiang Pan
Yujian Zhong
Original 19 July 2017 Pages: 91 - 98
Experimental and artificial neural network based prediction of performance and emission characteristics of DI diesel engine using Calophyllum inophyllum methyl ester at different nozzle opening pressure
G. Vairamuthu
B. Thangagiri
S. Sundarapandian
Original 20 July 2017 Pages: 99 - 113
Modeling and designing a new gas injection diffusion system for metalorganic chemical vapor deposition
C. C. Liao
S. S. Hsiau
T. C. Chuang
Original 21 July 2017 Pages: 115 - 123
The effect of nanoparticles aggregation on the thermal conductivity of nanofluids at very low concentrations: Experimental and theoretical evaluations
Mohsen Motevasel
Ali Reza Solaimany Nazar
Mohammad Jamialahmadi
Original 21 July 2017 Pages: 125 - 133
Investigation of obstacle effect to improve conjugate heat transfer in backward facing step channel using fast simulation of incompressible flow
Ali Nouri-Borujerdi
Arash Moazezi
Original 21 July 2017 Pages: 135 - 150
Measurement of the dynamic viscosity of hybrid engine oil -Cuo-MWCNT nanofluid, development of a practical viscosity correlation and utilizing the artificial neural network
Alireza Aghaei
Hossein Khorasanizadeh
Ghanbar Ali Sheikhzadeh
Original 24 July 2017 Pages: 151 - 161
Influence of collector heat capacity and internal conditions of heat exchanger on cool-down process of small gas liquefier
Ali Saberimoghaddam
Mohammad Mahdi Bahri Rasht Abadi
Original 26 July 2017 Pages: 163 - 175
Air drying modelling of Mastocarpus stellatus seaweed a source of hybrid carrageenan
Santiago Arufe
Maria D. Torres
Ramon Moreira
Original 26 July 2017 Pages: 177 - 184
An experimental study of flow and heat transfer characteristics of natural convection heat transfer from a horizontal heated surface with a heated cylinder
Rikio Shimoyama
Akihiko Horibe
Naoto Haruki
Original 26 July 2017 Pages: 185 - 192
Motion of water droplets in the counter flow of high-temperature combustion products
R. S. Volkov
P. A. Strizhak
Original 01 August 2017 Pages: 193 - 207
Void fraction development in gas-liquid flow after a U-bend in a vertically upwards serpentine-configuration large-diameter pipe
Almabrok A. Almabrok
Aliyu M. Aliyu
Hoi Yeung
Original 01 August 2017 Pages: 209 - 226
Investigations on the performance of chevron type plate heat exchangers
Oruganti Yaga Dutta
B. Nageswara Rao
Technical Note 21 July 2017 Pages: 227 - 239

Volume 54, Issue 1

Water freezing at outdoor temperatures higher than 0 °C by the effect of radiative cooling

Effect of different arrangements of sector on the performance of desiccant wheel

A revised correlation based on heat transfer model of slug flow in mini/micro-channels

Simulation of non-Newtonian oil-water core annular flow through return bends

Determination of heat capacity of ionic liquid based nanofluids using group method of data handling technique

Artificial neural network modeling of a deflector in a grooved channel as well as optimization of its effective parameters

A numerical study of the supercritical CO₂ plate heat exchanger subject to U-type, Z-type, and multi-pass arrangements

Dryout-type critical heat flux in vertical upward annular flow: effects of entrainment rate, initial entrained fraction and diameter

Analysis of key factors influencing the evaporation performances of an oriented linear cutting copper fiber sintered felt

Experimental and artificial neural network based prediction of performance and emission characteristics of DI diesel engine using Calophyllum inophyllum methyl ester at different nozzle opening pressure

Modeling and designing a new gas injection diffusion system for metalorganic chemical vapor deposition

The effect of nanoparticles aggregation on the thermal conductivity of nanofluids at very low concentrations: Experimental and theoretical evaluations

Investigation of obstacle effect to improve conjugate heat transfer in backward facing step channel using fast simulation of incompressible flow

Measurement of the dynamic viscosity of hybrid engine oil -Cuo-MWCNT nanofluid, development of a practical viscosity correlation and utilizing the artificial neural network

Influence of collector heat capacity and internal conditions of heat exchanger on cool-down process of small gas liquefier

Air drying modelling of Mastocarpus stellatus seaweed a source of hybrid carrageenan

An experimental study of flow and heat transfer characteristics of natural convection heat transfer from a horizontal heated surface with a heated cylinder

Motion of water droplets in the counter flow of high-temperature combustion products

Void fraction development in gas-liquid flow after a U-bend in a vertically upwards serpentine-configuration large-diameter pipe

Investigations on the performance of chevron type plate heat exchangers

Navigation