1. A study of densification and on factors affecting the density of Ni _x –Fe_{100 − x} nanopowders prepared by mechanical alloying and sintered by spark plasma

   • Thanganadar Ashokkumar
   • Arunachalam Rajadurai
   • Linda L. Hussami

   ORIGINAL ARTICLE 06 June 2012 Pages: 1201 - 1213

2. A new surface parameterization method based on one-step inverse forming for isogeometric analysis-suited geometry

   • Xue-Feng Zhu
   • Ping Hu
   • Mingzeng Liu

   ORIGINAL ARTICLE 09 June 2012 Pages: 1215 - 1227

3. Application of Bayesian networks for diagnostics in the assembly process by considering small measurement data sets

   • Yinhua Liu
   • Sun Jin

   ORIGINAL ARTICLE 06 June 2012 Pages: 1229 - 1237

4. Analysis on formation mechanism of ultra-smooth surfaces in atmospheric pressure plasma polishing

   • Jufan Zhang
   • Bing Li
   • Shen Dong

   ORIGINAL ARTICLE 06 June 2012 Pages: 1239 - 1245

5. A differential evolution fuzzy clustering approach to machine cell formation

   • Yucheng Kao
   • Chien-Chih Chen

   ORIGINAL ARTICLE 16 June 2012 Pages: 1247 - 1259

6. Cloud manufacturing service platform for small- and medium-sized enterprises

   • Biqing Huang
   • Chenghai Li
   • Xinpei Zhao

   ORIGINAL ARTICLE 12 June 2012 Pages: 1261 - 1272

7. Cross wedge rolling of a Ti6Al4V (ELI) alloy: the experimental studies and the finite element simulation of the deformation and failure

   • Metin Çakırcalı
   • Cenk Kılıçaslan
   • Vladimir V. Petronko

   ORIGINAL ARTICLE 06 June 2012 Pages: 1273 - 1287

8. Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven

   • Alvine Njionhou
   • Florentin Berthet
   • Bruno Castanié

   ORIGINAL ARTICLE 08 June 2012 Pages: 1289 - 1302

9. Towards an integrated robust and loop tooling design for tube bending

   • H. Li
   • H. Yang
   • K. Liu

   ORIGINAL ARTICLE 03 June 2012 Pages: 1303 - 1318

10. Development of RSM- and ANN-based models to predict and analyze the effects of process parameters of laser-hardened commercially pure titanium on heat input and tensile strength

    • Duradundi Sawant Badkar
    • Krishna Shankar Pandey
    • G. Buvanashekaran

    ORIGINAL ARTICLE 06 June 2012 Pages: 1319 - 1338

11. A hybrid Nelder–Mead simplex and PSO approach on economic and economic-statistical designs of MEWMA control charts

    • Farnaz Barzinpour
    • Rassool Noorossana
    • Mohammad Javad Ershadi

    ORIGINAL ARTICLE 01 June 2012 Pages: 1339 - 1348

12. Throughput-driven condition-based maintenance for frequently reconfigured mass production equipment

    • Chuan Siong Guan
    • Ye Chow Kuang
    • Melanie Po-Leen Ooi

    ORIGINAL ARTICLE 26 June 2012 Pages: 1349 - 1361

13. A hybrid FRTOC-SA algorithm for product mix problems with fuzzy processing time and capacity

    • Sepehr Ghazinoory
    • Parviz Fattahi
    • Parvaneh Samouei

    ORIGINAL ARTICLE 14 June 2012 Pages: 1363 - 1370

14. Weld seam tracking and panorama image generation for on-line quality assurance

    • Markus Heber
    • Martin Lenz
    • Gerardus Croonen

    Original Article 06 June 2012 Pages: 1371 - 1382

15. A CNC system based on real-time Ethernet and Windows NT

    • Ke Wang
    • Chengrui Zhang
    • Lin Yang

    ORIGINAL ARTICLE 08 June 2012 Pages: 1383 - 1395

16. Online monitoring and measurements of tool wear for precision turning of stainless steel parts

    • Tien-I Liu
    • Shin-Da Song
    • Zhang Wu

    ORIGINAL ARTICLE 26 June 2012 Pages: 1397 - 1407

17. Motion and stress analysis of direct-driven compliant mechanisms with general-purpose finite element software

    • Ranier Clement
    • J. L. Huang
    • W. J. Zhang

    ORIGINAL ARTICLE 15 June 2012 Pages: 1409 - 1421

18. Performance of sinking EDM electrodes made by selective laser sintering technique

    • Fred L. Amorim
    • Armin Lohrengel
    • Tiago Czelusniak

    ORIGINAL ARTICLE 09 June 2012 Pages: 1423 - 1428

19. An effective approximation algorithm for joint lot-sizing and pricing problem

    • Hamid Reza Askarpoor
    • Hamid Davoudpour

    ORIGINAL ARTICLE 19 June 2012 Pages: 1429 - 1437

20. Method for control of the make-to-order manufacturing system on the base of earning power assessment

    • Daniela Ghelase
    • Luiza Daschievici
    • Alexandru Epureanu

    ORIGINAL ARTICLE 10 June 2012 Pages: 1439 - 1458

21. High-aspect ratio micro-pin manufacturing using inverse slab electrical discharge milling (ISEDM) process

    • R. Gil
    • J. A. Sánchez
    • I. Pombo

    ORIGINAL ARTICLE 14 June 2012 Pages: 1459 - 1469

22. Research on the fabricating quality optimization of the overhanging surface in SLM process

    • Di Wang
    • Yongqiang Yang
    • Xubin Su

    ORIGINAL ARTICLE 16 June 2012 Pages: 1471 - 1484

23. A study on cubic boron nitride (CBN) milling of hardened cast iron for productive and quality manufacturing of machine tool structural components

    • Masakazu Soshi
    • Peter Fonda
    • Kazuo Yamazaki

    ORIGINAL ARTICLE 23 June 2012 Pages: 1485 - 1491

24. Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system

    • M. Sayuti
    • Ahmed A. D. Sarhan
    • Yoshio Saito

    ORIGINAL ARTICLE 10 June 2012 Pages: 1493 - 1500

25. Integration of fuzzy logic with response surface methodology for thrust force and surface roughness modeling of drilling on titanium alloy

    • B. Suresh Kumar
    • N. Baskar

    ORIGINAL ARTICLE 15 June 2012 Pages: 1501 - 1514

26. Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets

    • P. Janaki Ramulu
    • R. Ganesh Narayanan
    • Jayachandra Reddy

    ORIGINAL ARTICLE 14 June 2012 Pages: 1515 - 1528

27. Functional graded scaffold of HDPE/HA prepared by selective laser sintering: microstructure and mechanical properties

    • Gean V. Salmoria
    • Eduardo A. Fancello
    • Frederic Dabbas

    ORIGINAL ARTICLE 20 June 2012 Pages: 1529 - 1534

28. Logistics planning and inventory optimization using swarm intelligence: a third party perspective

    • S. K. Kumar
    • R. R. M. Roy Muddada
    • M. K. Tiwari

    ORIGINAL ARTICLE 31 July 2012 Pages: 1535 - 1551

29. Laser nitriding of the surface of phosphor bronze

    • B. S. Yilbas
    • S. S. Akhtar
    • C. Karatas

    ORIGINAL ARTICLE 26 June 2012 Pages: 1553 - 1565

30. A new DEA model for technology selection in the presence of ordinal data

    • Gholam R. Amin
    • Ali Emrouznejad

    ORIGINAL ARTICLE 19 June 2012 Pages: 1567 - 1572

31. Design and optimization of machining fixture layout using ANN and DOE

    • S. Selvakumar
    • K. P. Arulshri
    • K. S. K. Sasikumar

    ORIGINAL ARTICLE 19 June 2012 Pages: 1573 - 1586

32. New rating methods to prioritize customer requirements in QFD with incomplete customer preferences

    • Yoon-Eui Nahm
    • Haruo Ishikawa
    • Masato Inoue

    ORIGINAL ARTICLE 21 June 2012 Pages: 1587 - 1604

33. Producer’s behavior analysis in an uncertain bicriteria AGV-based flexible jobshop manufacturing system with expert system

    • Hamed Fazlollahtabar
    • Nezam Mahdavi-Amiri

    ORIGINAL ARTICLE 20 June 2012 Pages: 1605 - 1618

34. Feed rate modeling in circular–circular interpolation discontinuity for high-speed milling

    • B. Gassara
    • M. Baili
    • W. Bouzid Saï

    ORIGINAL ARTICLE 13 July 2012 Pages: 1619 - 1634

35. Positional, geometrical, and thermal errors compensation by tool path modification using three methods of regression, neural networks, and fuzzy logic

    • Sina Eskandari
    • Behrooz Arezoo
    • Amir Abdullah

    ORIGINAL ARTICLE 17 June 2012 Pages: 1635 - 1649

36. Kinematics prediction and experimental validation of machined surface roughness

    • Michael A. Damianakis
    • Matthew T. Bement
    • Steven Y. Liang

    ORIGINAL ARTICLE 29 June 2012 Pages: 1651 - 1657

37. Using optimization procedures to minimize machining time while maintaining surface quality

    • L. L. Corso
    • R. P. Zeilmann
    • H. M. Gomes

    ORIGINAL ARTICLE 26 June 2012 Pages: 1659 - 1667

38. Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements

    • Mohamed Slamani
    • Rene Mayer
    • Marek Balazinski

    ORIGINAL ARTICLE 19 June 2012 Pages: 1669 - 1679

39. Evaluation of static cutting forces and tool wear in HSM process applied to pocket milling

    • C. E. H. Ventura
    • A. Hassui

    ORIGINAL ARTICLE 21 June 2012 Pages: 1681 - 1689

40. Femtosecond laser-induced simultaneous surface texturing and crystallization of a-Si:H thin film: morphology study

    • Hongliang Wang
    • Panjawat Kongsuwan
    • Y. Lawrence Yao

    ORIGINAL ARTICLE 20 June 2012 Pages: 1691 - 1703

41. An analytical model of rotary ultrasonic milling

    • Erich Bertsche
    • Kornel Ehmann
    • Kostyantyn Malukhin

    ORIGINAL ARTICLE 04 July 2012 Pages: 1705 - 1720

42. Effects of inclination angles on geometrical features of machined surface in five-axis milling

    • Xiaoxiao Chen
    • Jun Zhao
    • Dong Wang

    ORIGINAL ARTICLE 30 June 2012 Pages: 1721 - 1733

43. Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-speed machining

    • Guosheng Su
    • Zhanqiang Liu

    ORIGINAL ARTICLE 20 June 2012 Pages: 1735 - 1740

44. Outline of a fault diagnosis system for a large-scale board machine

    • Sirkka-Liisa Jämsä-Jounela
    • Vesa-Matti Tikkala
    • Veikko Hämäläinen

    Original Article 29 June 2012 Pages: 1741 - 1755

45. High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler

    • N. Kishore Babu
    • Mahesh Kumar Talari
    • J. Wei

    ORIGINAL ARTICLE 26 June 2012 Pages: 1757 - 1767

46. On the role of form defects in assemblies subject to local deformations and mechanical loads

    • J. Grandjean
    • Y. Ledoux
    • S. Samper

    ORIGINAL ARTICLE 27 June 2012 Pages: 1769 - 1778

47. Pulse current auxiliary TLP diffusion bonding of SiCp/2024Al composite sheet using mixed Al–Cu–Ti powder interlayer

    • B. Wang
    • S. S. Jiang
    • K. F. Zhang

    ORIGINAL ARTICLE 19 June 2012 Pages: 1779 - 1784

48. Design and implementation of an innovative quadratic Gaussian control system for laser surface treatments

    • José Antonio Pérez
    • Manuel López

    ORIGINAL ARTICLE 21 June 2012 Pages: 1785 - 1790

49. Orthogonal polynomials-based thermally induced spindle and geometric error modeling and compensation

    • Kaiguo Fan
    • Jianguo Yang
    • Liyan Yang

    ORIGINAL ARTICLE 21 June 2012 Pages: 1791 - 1800