1. Composite part design based on numerical simulation of the manufacturing process

   • Serge Mouton
   • Yann Ledoux
   • Patrick Sébastian

   ORIGINAL ARTICLE 31 December 2010 Pages: 421 - 431

2. Model-based robust design for time–pressure fluid dispensing using surrogate modeling

   • Yi-Xiang Zhao
   • Xin-Du Chen

   ORIGINAL ARTICLE 31 December 2010 Pages: 433 - 446

3. Analysis of ceramic shell cracking in stereolithography-based rapid casting of turbine blade

   • Xiaojie Chen
   • Dichen Li
   • Lei Zhao

   ORIGINAL ARTICLE 10 December 2010 Pages: 447 - 455

4. Chatter prediction in turning process of conical workpieces by using case-based resoning (CBR) method and taguchi design of experiment

   • Amir Mahyar Khorasani
   • Abdolhossein Jalali Aghchai
   • Ali Khorram

   ORIGINAL ARTICLE 22 December 2010 Pages: 457 - 464

5. Evaluation of surface integrity in micro drilling process for nickel-based superalloy

   • Muhammad Imran
   • Paul T. Mativenga
   • Philip J. Withers

   ORIGINAL ARTICLE 24 December 2010 Pages: 465 - 476

6. Statistical analysis of process parameters in drilling of AL/SIC_P metal matrix composite

   • Gül Tosun

   ORIGINAL ARTICLE 31 December 2010 Pages: 477 - 485

7. Multistage machining processes variation propagation analysis based on machining processes weighted network performance

   • Yongtao Qin
   • Liping Zhao
   • Damin Xu

   ORIGINAL ARTICLE 30 December 2010 Pages: 487 - 499

8. Magnetic abrasive finishing of hardened AISI 52100 steel

   • Rahul S. Mulik
   • Pulak M. Pandey

   ORIGINAL ARTICLE 31 December 2010 Pages: 501 - 515

9. Warpage phenomenon of thin-wall injection molding

   • Yuh-Chyun Chiang
   • Hsin-Chung Cheng
   • Yung-Kang Shen

   ORIGINAL ARTICLE 15 December 2010 Pages: 517 - 526

10. Welding of quenched and tempered steels with high-spin arc narrow gap MAG system

    • Ding Min
    • Tang Xin-hua
    • Yao Shun

    ORIGINAL ARTICLE 01 December 2010 Pages: 527 - 533

11. Neural network-based expert systems for predictions of temperature distributions in electron beam welding process

    • Dhanunjaya Y. A. Reddy
    • Dilip Kumar Pratihar

    ORIGINAL ARTICLE 15 December 2010 Pages: 535 - 548

12. Manufacturing process modelling using process specification language

    • Lihong Qiao
    • Shuting Kao
    • Yizhu Zhang

    ORIGINAL ARTICLE 04 January 2011 Pages: 549 - 563

13. Experimental investigation on monitoring interelectrode gap of ECM with six-axis force sensor

    • Yonghua Lu
    • Kai Liu
    • Dongbiao Zhao

    ORIGINAL ARTICLE 22 December 2010 Pages: 565 - 572

14. Selective metallization of polymers using laser induced surface activation (LISA)—characterization and optimization of porous surface topography

    • Yang Zhang
    • Hans N. Hansen
    • Jacob S. Nielsen

    ORIGINAL ARTICLE 01 December 2010 Pages: 573 - 580

15. Module-based Failure Propagation (MFP) model for FMEA

    • Kyoung-Won Noh
    • Hong-Bae Jun
    • Hyo-Won Suh

    ORIGINAL ARTICLE 14 December 2010 Pages: 581 - 600

16. Improving the quality of surface in the polishing process with the magnetic abrasive powder polishing using a high-frequency induction heating source on CNC table

    • Seyed Saeed Mirian
    • Alireza Fadaei
    • Mahmoud Salimi

    ORIGINAL ARTICLE 16 December 2010 Pages: 601 - 610

17. An accurate and robust method for the honing angle evaluation of cylinder liner surface using machine vision

    • Deepak Lawrence.K
    • Balakrishnan Ramamoorthy

    ORIGINAL ARTICLE 14 December 2010 Pages: 611 - 621

18. Application of projection pursuit regression to thermal error modeling of a CNC machine tool

    • Guo Qianjian
    • Yang Jianguo

    ORIGINAL ARTICLE 21 December 2010 Pages: 623 - 629

19. Experimental studies on optimization of process parameters and finite element analysis of temperature and stress distribution on joining of Al–Al and Al–Al₂O₃ using ultrasonic welding

    • Elangovan Sooriyamoorthy
    • Shenton Ponnayya John Henry
    • Prakasan Kalakkath

    ORIGINAL ARTICLE 08 December 2010 Pages: 631 - 640

20. Finite element analysis of countersinking process

    • Ibrahim Jallouli
    • Abdelkader Krichen
    • Kacem Saï

    Original Article 16 December 2010 Pages: 641 - 648

21. “Finite element modeling of the effect of heat input on residual stresses in dissimilar joints”

    • Eslam Ranjbarnodeh
    • Siamak Serajzadeh
    • Alfons Fischer

    ORIGINAL ARTICLE 22 December 2010 Pages: 649 - 656

22. Five-axis automated measurement by coordinate measuring machine

    • Hui-Chin Chang
    • Alan C. Lin

    ORIGINAL ARTICLE 22 December 2010 Pages: 657 - 673

23. Tolerance chart balancing with a complete inspection plan taking account of manufacturing and quality costs

    • Angus Jeang

    ORIGINAL ARTICLE 16 December 2010 Pages: 675 - 687

24. Optimal inspection policy for three-state systems monitored by variable sample size control charts

    • Shaomin Wu

    Original Article 21 December 2010 Pages: 689 - 697

25. PCA-based fault isolation and prognosis with application to pump

    • Gary R. Halligan
    • S. Jagannathan

    ORIGINAL ARTICLE 15 December 2010 Pages: 699 - 707

26. A new mathematical model for integrating lot sizing, loading, and scheduling decisions in flexible flow shops

    • Mohammad Mohammadi
    • Niloofar Jafari

    ORIGINAL ARTICLE 21 December 2010 Pages: 709 - 721

27. Multi-objective optimization algorithms for flow shop scheduling problem: a review and prospects

    • Yi Sun
    • Chaoyong Zhang
    • Xiaojuan Wang

    ORIGINAL ARTICLE 21 December 2010 Pages: 723 - 739

28. A GRASP heuristic for the multi-objective permutation flowshop scheduling problem

    • José Elias Claudio Arroyo
    • Ana Amélia de Souza Pereira

    ORIGINAL ARTICLES 23 December 2010 Pages: 741 - 753

29. Solving the blocking flow shop scheduling problem by a dynamic multi-swarm particle swarm optimizer

    • J. J. Liang
    • Quan-Ke Pan
    • Ling Wang

    ORIGINAL ARTICLE 30 December 2010 Pages: 755 - 762

30. A knowledge-based engineering system for assembly sequence planning

    • Yung-Yuan Hsu
    • Pei-Hao Tai
    • Wen-Chin Chen

    ORIGINAL ARTICLE 30 December 2010 Pages: 763 - 782

31. Ant colony optimization for group technology applications

    • Anil Kumar Agrawal
    • Prabhas Bhardwaj
    • Vivek Srivastava

    ORIGINAL ARTICLE 21 December 2010 Pages: 783 - 795

32. An integrated approach to machine selection and operation allocation problem

    • Evrim Ursavas Guldogan

    ORIGINAL ARTICLE 14 December 2010 Pages: 797 - 805

33. A competitive location model to obtain a specific market share while ranking facilities by shorter travel time

    • Naeme Zarrinpoor
    • Mehdi Seifbarghy

    ORIGINAL ARTICLE 17 December 2010 Pages: 807 - 816

34. Perceived organisational support, job involvement and turnover intention in lean production in Sri Lanka

    • Dharmasri Wickramasinghe
    • Vathsala Wickramasinghe

    ORIGINAL ARTICLE 21 December 2010 Pages: 817 - 830

35. Determination of the economical policy of a three-echelon inventory system with (R, Q) ordering policy and information sharing

    • Mostafa Hajiaghaei-Keshteli
    • Seyyed Mehdi Sajadifar
    • Rasoul Haji

    ORIGINAL ARTICLE 31 December 2010 Pages: 831 - 841