1. Review on preparation technology and properties of spherical powders

   • Shuo Yu
   • Yugang Zhao
   • Hao Liu

   Critical Review 21 March 2024 Pages: 1053 - 1069

   

2. Multimodal perception-fusion-control and human–robot collaboration in manufacturing: a review

   • Jianguo Duan
   • Liwen Zhuang
   • Jiyun Qin

   Critical Review 23 March 2024 Pages: 1071 - 1093

   

3. Evaluation of the influence of ultrasonic vibration on physical, tensile, and morphological properties of fused deposition modeled specimens

   • Raihan Quader
   • Leo Klinstein
   • Lokesh Karthik Narayanan

   ORIGINAL ARTICLE Open access 19 March 2024 Pages: 1095 - 1109

   

4. Numerical modeling of fill-level and residence time in starve-fed single-screw extrusion: a dimensionality reduction study from a 3D CFD model to a 2D convection-diffusion model

   • Erik Holmen Olofsson
   • Ashley Dan
   • Jesper Henri Hattel

   ORIGINAL ARTICLE Open access 19 March 2024 Pages: 1111 - 1125

   

5. Cooling efficiency enhancement using a rapid tool with a surface-cooled waterfall cooling channel

   • Chil-Chyuan Kuo
   • Pin-Han Lin
   • Song-Hua Huang

   ORIGINAL ARTICLE 19 March 2024 Pages: 1127 - 1136

   

6. Joining of AA5052 to CF/PEEK by friction lap welding

   • Jamal Sheikh-Ahmad
   • Redouane Zitoune
   • Benoit Vieille

   ORIGINAL ARTICLE 19 March 2024 Pages: 1137 - 1150

   

7. Optimization of a tetrahedron compliant spherical joint via computer-aided engineering tools

   • Seyyed Masoud Kargar
   • Alberto Parmiggiani
   • Giovanni Berselli

   ORIGINAL ARTICLE Open access 19 March 2024 Pages: 1151 - 1162

   

8. Optimization of critical process control parameters in MEX additive manufacturing of high-performance polyethylenimine: energy expenditure, mechanical expectations, and productivity aspects

   • Nectarios Vidakis
   • Markos Petousis
   • Emmanuel Kymakis

   ORIGINAL ARTICLE Open access 19 March 2024 Pages: 1163 - 1192

   

9. Characteristics of magnetic elastic abrasive particles and their effect on tool passivation

   • Xuefeng Zhao
   • Yin Yuan
   • Xiaolong Yin

   ORIGINAL ARTICLE 19 March 2024 Pages: 1193 - 1215

   

10. Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy

    • Yangyang Xu
    • Liqiang Zhang
    • Jian Mao

    ORIGINAL ARTICLE 20 March 2024 Pages: 1217 - 1235

    

11. Research on coated wiper insert for milling of compacted graphite iron

    • Jun Tan
    • Jianping Wang
    • Ning He

    ORIGINAL ARTICLE 20 March 2024 Pages: 1237 - 1249

    

12. Machining behavior and experimental investigation of ultrasonic vibration assisted belt flapwheel flexible polishing

    • Danni Lu
    • Kaining Shi
    • Zhen Chen

    ORIGINAL ARTICLE 20 March 2024 Pages: 1251 - 1265

    

13. Modeling of material removal by magnetic abrasive finishing of the inner wall of Co-Cr alloy cardiovascular stent tube with diamond magnetic abrasive powder prepared by plasma melting

    • Zhihao Li
    • Yugang Zhao
    • Dandan Zhao

    ORIGINAL ARTICLE 20 March 2024 Pages: 1267 - 1281

    

14. Understanding the mechanism of ultrasonic vibration-assisted drilling (UVAD) for micro-hole formation on silicon wafers using numerical and analytical techniques

    • Rendi Kurniawan
    • Shuo Chen
    • Tae Jo Ko

    ORIGINAL ARTICLE 20 March 2024 Pages: 1283 - 1313

    

15. Performance assessment of mahogany oil-based cutting fluid in turning AISI 304 steel alloy

    • Joseph Abutu
    • Paul Akene
    • Sunday Albert Lawal

    ORIGINAL ARTICLE 20 March 2024 Pages: 1315 - 1335

    

16. Full cycle numerical simulation during the pulsed laser cladding process considering the interaction between laser and powder

    • Han Sun
    • Chang Li
    • Xing Han

    ORIGINAL ARTICLE 20 March 2024 Pages: 1337 - 1363

    

17. Thermal error modeling of electric spindles based on cuckoo algorithm optimized Elman network

    • Ye Dai
    • Xin Wang
    • Xingwen Zhou

    ORIGINAL ARTICLE 20 March 2024 Pages: 1365 - 1375

    

18. Feasibility study of using digital twins for conceptual design of air-quenching processes

    • Zhuming Bi
    • Donald Mueller
    • Aki Mikkola

    ORIGINAL ARTICLE 20 March 2024 Pages: 1377 - 1390

    

19. Multi-scale modeling reveals microstructural and mechanical evolution in GH4169 and DD5 nickel-based superalloys during grinding

    • Minghui Chen
    • Ming Cai
    • Minglei Zhang

    ORIGINAL ARTICLE 20 March 2024 Pages: 1391 - 1410

    

20. Study on design of conical arc side-edge milling cutter and cutting performance under ultrasonic-assisted condition

    • Guangyue Wang
    • Wenyuan Xu
    • Tao Chen

    ORIGINAL ARTICLE 21 March 2024 Pages: 1411 - 1423

    

21. Failure-based design validation for effective repair of multi-metal additive manufacturing: the case of remanufacturable brake caliper

    • Nurhasyimah Abd Aziz
    • Lenggeswaran Elanggoven
    • Nurfadzylah Awang

    ORIGINAL ARTICLE 21 March 2024 Pages: 1425 - 1437

    

22. Adaptive location method for film cooling holes based on the design intent of the turbine blade

    • Yaohua Hou
    • Jing Wang
    • Hualong Zhao

    ORIGINAL ARTICLE 21 March 2024 Pages: 1439 - 1452

    

23. Automated robotic assembly of shaft sleeve based on reinforcement learning

    • Xumiao Ma
    • De Xu

    ORIGINAL ARTICLE 21 March 2024 Pages: 1453 - 1463

    

24. A unified ternary-mechanism model for the calibration of cutting force coefficients and prediction of ploughing-based process damping in flank milling process

    • Jia Feng
    • Zhou Huang
    • Yang-Yong Ou

    ORIGINAL ARTICLE 21 March 2024 Pages: 1465 - 1480

    

25. Hybrid physics data-driven model-based fusion framework for machining tool wear prediction

    • Tianhong Gao
    • Haiping Zhu
    • Shaowen Zhang

    ORIGINAL ARTICLE 21 March 2024 Pages: 1481 - 1496

    

26. Research on efficient electrical discharge machining trepanning technology of TC4 titanium alloy hole

    • Mingbo Qiu
    • Entao Wu
    • Zhidong Liu

    ORIGINAL ARTICLE 21 March 2024 Pages: 1497 - 1509

    

27. Evaluation of energy consumption and carbon emission in EDM

    • Jiuyong Xu
    • Kan Wang
    • Qinhe Zhang

    ORIGINAL ARTICLE 21 March 2024 Pages: 1511 - 1524

    

28. Spindle unit thermal error modeling and compensation based on digital twin

    • Jialan Liu
    • Chi Ma
    • Qiang Yuan

    ORIGINAL ARTICLE 21 March 2024 Pages: 1525 - 1555

    

29. Investigation of interactions between fiber lasers and Si₃N₄ sheets for drilling square microholes with multi-ring strategy

    • Shih-Feng Tseng
    • Guan-Lin Chen
    • Chil-Chyuan Kuo

    ORIGINAL ARTICLE 21 March 2024 Pages: 1557 - 1572

    

30. A fast simulation method for thermal management in wire arc additive manufacturing repair of a thin-walled structure

    • Paul Qvale
    • Eirik B. Njaastad
    • Xiaobo Ren

    ORIGINAL ARTICLE Open access 21 March 2024 Pages: 1573 - 1583

    

31. Determination of quality classes for material extrusion additive manufacturing using image processing

    • Alexander Oleff
    • Benjamin Küster
    • Ludger Overmeyer

    ORIGINAL ARTICLE Open access 21 March 2024 Pages: 1585 - 1598

    

32. Experimental study on corner filling of B1800HS boron steel tubes in hot metal gas forming process

    • Xianggang Ruan
    • Xinyu Hu
    • Zhubin He

    ORIGINAL ARTICLE 22 March 2024 Pages: 1599 - 1611

    

33. Numerical model establishment and experimental study of milling head cooling water flow rate

    • Ye Dai
    • Yang Li
    • Weiwei Li

    ORIGINAL ARTICLE 22 March 2024 Pages: 1613 - 1625

    

34. Evaluating deposits of SS316L powder and wire consolidated using co-axial laser directed energy deposition

    • Ajay Kushwaha
    • Amrita Basak

    ORIGINAL ARTICLE 22 March 2024 Pages: 1627 - 1647

    

35. An optimized calculation method of the grinding wheel profile for the helical flute forming grinding

    • Lei Jiang
    • Zhihui Yang
    • Xin He

    ORIGINAL ARTICLE 22 March 2024 Pages: 1649 - 1664

    

36. Compensation of billet variabilities through metamodel-based optimization in open die forging

    • Simon Fays
    • Cyrille Baudouin
    • Régis Bigot

    ORIGINAL ARTICLE 22 March 2024 Pages: 1665 - 1678

    

37. Optimizing die parameters of microstamping process for PEMFC 316L bipolar plate using NCL fracture criterion and response surface methodology

    • Fuqiang Zhao
    • Zhiying Gao
    • Xiaofeng Ding

    ORIGINAL ARTICLE 23 March 2024 Pages: 1679 - 1696

    

38. Energy absorption of PLA-based metamaterials manufactured by material extrusion: dynamic loads and shape recovery

    • Maria Pia Desole
    • Annamaria Gisario
    • Massimiliano Barletta

    ORIGINAL ARTICLE Open access 23 March 2024 Pages: 1697 - 1722

    

39. An adaptive impedance control method for blade polishing based on the Kalman filter

    • Xuhui Zhao
    • Jia Liu
    • Xueqian Zhang

    ORIGINAL ARTICLE 23 March 2024 Pages: 1723 - 1739

    

40. Surface roughness optimization of hybrid PBF-LB/M-built Inconel 718 using in situ high-speed milling

    • David Sommer
    • Simon Hornung
    • Ralf Hellmann

    ORIGINAL ARTICLE Open access 23 March 2024 Pages: 1741 - 1751

    

41. Effect of pulse shaping on coupling efficiency of laser spot welding in AZ31 magnesium alloy

    • Pengfei Zhao
    • Xiaobin Zhang
    • Zhanyi Cao

    ORIGINAL ARTICLE 23 March 2024 Pages: 1753 - 1767

    

42. Modelling approaches for surface densification process of sintered gear teeth

    • Alessandro De Luca
    • Francesco Caputo
    • Enrico Armentani

    ORIGINAL ARTICLE 23 March 2024 Pages: 1769 - 1789

    

43. Numerical analysis of stress & strain and thickness variation in single point incremental forming of tailor welded steel blanks

    • Usman Attique
    • Shahid Ikramullah Butt
    • Ghulam Hussain

    ORIGINAL ARTICLE 23 March 2024 Pages: 1791 - 1807

    

44. Research on three-dimensional cutting force theoretical model of turning glass–ceramics based on discretization of cutting edge

    • Hongshuang Li
    • Lianjie Ma
    • Ming Li

    ORIGINAL ARTICLE 23 March 2024 Pages: 1809 - 1825

    

45. Influence of extrusion 4D printing parameters on the thermal shape-morphing behaviors of polylactic acid (PLA)

    • Aref Ansaripour
    • Mohammad Heidari-Rarani
    • Mahdi Bodaghi

    ORIGINAL ARTICLE 25 March 2024 Pages: 1827 - 1842

    

46. Constitutive analysis of hot metal flow behavior of virgin and rejuvenated heat treatment creep exhausted power plant X20 steel

    • Shem Maube
    • Japheth Obiko
    • Michael Bodunrin

    ORIGINAL ARTICLE 25 March 2024 Pages: 1843 - 1853

    

47. Design and construction for theory and method of magnetic-controlled negative pressure GTAW arc model based on multi-physics simulation

    • Kefeng Xu
    • Jian Luo
    • Lei Ling

    Original Article 25 March 2024 Pages: 1855 - 1868

    

48. Microscopic and Mechanical Properties Characterization of Laser Beam Welded 5754 to 6063 Aluminum Alloys

    • Epameinondas Katsikas
    • Anastasios Kladis
    • Petros E. Tsakiridis

    ORIGINAL ARTICLE 25 March 2024 Pages: 1869 - 1881

    

49. Structure and mechanical properties of three-layer composites obtained by magnetic pulse welding of titanium and Zr-based metallic glass

    • Daria V. Lazurenko
    • Alexander A. Ivannikov
    • Konstantin E. Kuper

    ORIGINAL ARTICLE 25 March 2024 Pages: 1883 - 1895

    

50. Adaptable multi-objective optimization framework: application to metal additive manufacturing

    • Mohamed Imad Eddine Heddar
    • Brahim Mehdi
    • Mohammad Jahazi

    ORIGINAL ARTICLE 25 March 2024 Pages: 1897 - 1914