1. Announcement of B. John Davies Prize for the best paper published in IJAMT in 2022

   • Silvia Schilgerius
   • Andrew Y. C. Nee

   Editorial 16 February 2024 Pages: 3335 - 3336

2. Thanking reviewers

   • Andrew Y. C. Nee
   • Silvia Schilgerius

   Editorial 02 March 2024 Pages: 3337 - 3350

3. Robotic grinding based on point cloud data: developments, applications, challenges, and key technologies

   • Xinlei Ding
   • Jinwei Qiao
   • Rongmin Zhang

   Critical Review 15 February 2024 Pages: 3351 - 3371

   

4. A review on machining Ti–5Al–5V–5Mo–3Cr alloy using defined geometry tools

   • Rodrigo Gonçalves dos Santos
   • Qianxi He
   • Fred Lacerda Amorim

   Critical Review 17 February 2024 Pages: 3373 - 3400

   

5. Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

   • Jun Yao
   • Xun Li
   • Ruijie Gou

   Critical Review 23 February 2024 Pages: 3401 - 3419

   

6. Correction to: Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

   • Jun Yao
   • Xun Li
   • Ruijie Gou

   Correction 12 March 2024 Pages: 3421 - 3422

   

7. Effect of short electric arc milling discharge machining on the processing performance of two-dimensional C/SiC composites

   • Bingbing Wang
   • Jianping Zhou
   • Hongwang Ma

   Critical Review 24 February 2024 Pages: 3423 - 3439

   

8. Evolution of hot metal gas forming (HMGF) technologies and its applications: a review

   • Hamza Blala
   • Cheng Pengzhi
   • Shahrukh Khan

   Critical Review 24 February 2024 Pages: 3441 - 3466

   

9. Experimental study of the removal characteristics of C/SiC with different fiber structure arrangements for two-dimensional ultrasound-assisted grinding

   • Yashuai Wang
   • Jiangtao Li

   ORIGINAL ARTICLE 15 February 2024 Pages: 3467 - 3485

   

10. Height inhomogeneity in flow forming of thin-walled tubes with helical grid-stiffened ribs: characterization, mechanism and control method

    • Wei Lyu
    • Mei Zhan
    • Fei Ma

    ORIGINAL ARTICLE 15 February 2024 Pages: 3487 - 3498

    

11. Unveiling empirical correlation between electrical and thermal conductivities of medium porosity open-cell porous aluminium fabricated by replication casting method

    • Njoku Romanus Egwuonwu
    • Oloche Oyihi Boniface
    • Aigbodion Victor Sunday

    Original Article 15 February 2024 Pages: 3499 - 3507

    

12. A challenging study on compatibility or incompatibility of vegetable-based lubricant with human health

    • Seyed Hasan Musavi
    • Behnam Davoodi

    ORIGINAL ARTICLE 16 February 2024 Pages: 3509 - 3525

    

13. Reducing tool-tip wear in micro-ECDM scanning process with feedback control of flexible contact force

    • Shan Ali Nawaz
    • Peiyao Cao
    • Yong Li

    ORIGINAL ARTICLE 16 February 2024 Pages: 3527 - 3538

    

14. Effect of milling time on structural, physical and photocatalytical properties of Ti-Ni alloy for biomedical applications

    • Nabila Bouchareb
    • Mamoun Fellah
    • Gamal A. El-Hiti

    ORIGINAL ARTICLE 16 February 2024 Pages: 3539 - 3553

    

15. Working end wear of 3D-laminated microelectrode in reverse-polarity PMEDM with Gr and Cu powders

    • Zhao-zhi Wu
    • Xiao-yu Wu
    • Bo Wu

    ORIGINAL ARTICLE 17 February 2024 Pages: 3555 - 3564

    

16. Comparative investigation and optimization of cutting tools performance during milling machining of titanium alloy (Ti6Al4V) using response surface methodology

    • Solomon Ntshiniki Phokobye
    • Dawood Ahmed Desai
    • Kalenda Mutombo

    ORIGINAL ARTICLE Open access 19 February 2024 Pages: 3565 - 3577

    

17. An integrated framework for a multi-material surface roughness prediction model in CNC turning using theoretical and machine learning methods

    • Kristin S. Bennett
    • Jose Mario DePaiva
    • Stephen C. Veldhuis

    ORIGINAL ARTICLE 19 February 2024 Pages: 3579 - 3598

    

18. An efficient and precise stability analysis method for milling process

    • Chunjing Liu
    • Dunbing Tang
    • Guohua Ding

    ORIGINAL ARTICLE 19 February 2024 Pages: 3599 - 3614

    

19. A novel approach to voice of customer extraction using GPT-3.5 Turbo: linking advanced NLP and Lean Six Sigma 4.0

    • Mohammad Shahin
    • F. Frank Chen
    • Ayda Eghbalian

    ORIGINAL ARTICLE 19 February 2024 Pages: 3615 - 3630

    

20. Optimization of forward pulsed currents for combining the precision shaping and polishing of nickel micro mould tools to reduce demoulding defects

    • Sana Zaki
    • Nan Zhang
    • Michael D. Gilchrist

    ORIGINAL ARTICLE Open access 19 February 2024 Pages: 3631 - 3649

    

21. Effect of pre-strain on the brazing characteristics of a high-strength aluminum brazing sheet with a barrier layer

    • Taha Waqar
    • Mark A. Whitney
    • Michael J. Benoit

    ORIGINAL ARTICLE 19 February 2024 Pages: 3651 - 3664

    

22. Cross-scale identification method for friction damage on the tool flank of high-feed milling cutter

    • Bin Jiang
    • Feifei Li
    • Shuling Sun

    ORIGINAL ARTICLE 20 February 2024 Pages: 3665 - 3694

    

23. A new redundancy strategy for enabling graceful degradation in resilient robotic flexible assembly cells

    • Ziyue Jin
    • Romeo M. Marian
    • Javaan S. Chahl

    ORIGINAL ARTICLE Open access 20 February 2024 Pages: 3695 - 3711

    

24. Research on the thermal forming limit diagram (TFLD) with the M-K model for Ti-6Al-4V alloy

    • Song Gao
    • Guotao Wang
    • Qihan Li

    ORIGINAL ARTICLE 20 February 2024 Pages: 3713 - 3728

    

25. Forming mechanism of leaf-like integral outside finned tubes via sequential knurling and cutting-bending method

    • Yang Zou
    • Kairui Tang
    • Yong Tang

    ORIGINAL ARTICLE 20 February 2024 Pages: 3729 - 3737

    

26. Grinding performances and failure analyses of electroplated Ni–B-diamond tools with a high density of single- or dual-layer D-150-diamond particles

    • Chia Hsuan Shen
    • Aphichart Rodchanarowan
    • Ching An Huang

    ORIGINAL ARTICLE 20 February 2024 Pages: 3739 - 3750

    

27. Impact of process parameters on improving the performance of 3D printed recycled polylactic acid (rPLA) components

    • Mohammad Raquibul Hasan
    • Ian J. Davies
    • Wahidul K. Biswas

    ORIGINAL ARTICLE Open access 20 February 2024 Pages: 3751 - 3779

    

28. Optimization of shot peening parameters for blades based on the constraint of equivalent residual stress-induced deformation

    • Zhang Jiyin
    • Yao Changfeng
    • Wei Qing

    ORIGINAL ARTICLE 20 February 2024 Pages: 3781 - 3792

    

29. The curvature modeling for the double layered clad plate by asymmetric rolling with different diameters

    • Lian-Yun Jiang
    • Jia-Le Liang
    • Li-Feng Ma

    ORIGINAL ARTICLE 20 February 2024 Pages: 3793 - 3809

    

30. The study of different flow fields at the corner during the electrochemical machining of internal gear

    • Junfei Li
    • Shuaizhe Tan
    • Yongjun Zhang

    ORIGINAL ARTICLE 20 February 2024 Pages: 3811 - 3830

    

31. Study on the injection wear behavior and contact characteristics of SiC and Al₂O₃ particles during the abrasive jet machining of Nickel 200

    • Feng-Che Tsai

    ORIGINAL ARTICLE 20 February 2024 Pages: 3831 - 3850

    

32. Cold formability of friction stir processed 5754-H111 and 6082-T6 aluminum alloys: an experimental and numerical study

    • Alessia Teresa Silvestri
    • Gianluca Parodo
    • Antonino Squillace

    ORIGINAL ARTICLE Open access 20 February 2024 Pages: 3851 - 3869

    

33. Construction of a predictive model for residual stresses in micro-milling of 7075 aluminum alloy

    • Ping Zhang
    • Songting Zhang
    • Xiujie Yue

    ORIGINAL ARTICLE 21 February 2024 Pages: 3871 - 3883

    

34. Modeling and experimental analysis of ultrasonic vibration drilling force prediction model for tiny small holes in high body fraction aluminum-based silicon carbide composites

    • Shuaikun Yang
    • Jinglin Tong
    • Hongqing Tao

    ORIGINAL ARTICLE 21 February 2024 Pages: 3885 - 3903

    

35. Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter

    • Yufeng Jiang
    • Minglong Guo
    • Zhaocheng Wei

    ORIGINAL ARTICLE 21 February 2024 Pages: 3905 - 3919

    

36. Distribution analysis of deterministic clamping and positioning error for machining of ring-shaped workpieces considering alignment uncertainty

    • Xueming Du
    • Shun Liu
    • Sun Jin

    ORIGINAL ARTICLE 21 February 2024 Pages: 3921 - 3936

    

37. A surface quality prediction model considering the machine-tool-material interactions

    • Miaoxian Guo
    • Wanliang Xia
    • Zhijian Lin

    ORIGINAL ARTICLE 21 February 2024 Pages: 3937 - 3955

    

38. Optimization of shape-forming accuracy in arc-striking and arc-extinguishing areas of weld bead by torch hovering for directed energy deposition-arc manufactured nickel aluminum bronze alloy component

    • Jiacheng Huang
    • Fang Li
    • Xueming Hua

    ORIGINAL ARTICLE 21 February 2024 Pages: 3957 - 3973

    

39. Improvement of ultrasonic cavitation and pumping effect in microhole EDM

    • Peng Xiang Wang
    • Da Guo Yu
    • Xiao Yang Li

    ORIGINAL ARTICLE 21 February 2024 Pages: 3975 - 3994

    

40. A novel approach for robot calibration based on measurement sub-regions with comparative validation

    • Juan S. Toquica
    • José Mauricio S.T. Motta

    ORIGINAL ARTICLE 21 February 2024 Pages: 3995 - 4008

    

41. Investigation of depth error of microgroove in micro-EDM adopting ultrasonic circular vibration (UCV) electrode

    • Jiajing Tang
    • Zhengkai Li
    • Jicheng Bai

    ORIGINAL ARTICLE 21 February 2024 Pages: 4009 - 4020

    

42. Prediction of temperature field in the whole process of instantaneous and steady state of high-speed motorized spindle

    • Zhang Lixiu
    • Bao Ruwei

    ORIGINAL ARTICLE 22 February 2024 Pages: 4021 - 4034

    

43. Geometric error compensation method using the Laser R-test

    • Tung-Hsien Hsieh
    • Wen-Yuh Jywe
    • Yu-Wei Chang

    ORIGINAL ARTICLE Open access 22 February 2024 Pages: 4035 - 4053

    

44. Influences of laser on the energy parameters of the electric arc in the case of laser-MIG hybrid welding

    • Lyes Bidi
    • Philippe Le Masson
    • Eugen Cicala

    ORIGINAL ARTICLE 22 February 2024 Pages: 4055 - 4069

    

45. A disturbance evaluation method for scheduling mechanisms in digital twin-based workshops

    • Pengjun Yue
    • Tianliang Hu
    • Songhua Ma

    ORIGINAL ARTICLE 22 February 2024 Pages: 4071 - 4088

    

46. Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints

    • Merbin John
    • Md Shariful Islam
    • Pradeep L. Menezes

    ORIGINAL ARTICLE 22 February 2024 Pages: 4089 - 4105

    

47. Numerical analysis EF of resilience impact test behavior for X80 steel

    • Mohammed El Alami
    • Abdellah Laazizi
    • Kaoutar Fri

    ORIGINAL ARTICLE 22 February 2024 Pages: 4107 - 4128

    

48. A novel step-by-step procedure for the kinematic calibration of robots using a single draw-wire encoder

    • Giovanni Boschetti
    • Teresa Sinico

    ORIGINAL ARTICLE Open access 23 February 2024 Pages: 4129 - 4147

    

49. Gradual error detection technique for non-destructive assessment of density and tensile strength in fused filament fabrication processes

    • Max Raths
    • Lukas Bauer
    • Tobias Laumer

    ORIGINAL ARTICLE Open access 23 February 2024 Pages: 4149 - 4163

    

50. Study on the formation mechanism of surface defects in the processing of large particle SiCp/Al composites

    • Zhigao Chen
    • Bo Wang
    • Mingjun Chen

    ORIGINAL ARTICLE 23 February 2024 Pages: 4165 - 4183