1. Enhanced manufacture technology based on emission reduction and carbon reduction in cutting and grinding

   • Changhe Li
   • Yanbin Zhang
   • Zafar Said

   Editorial 23 February 2024 Pages: 1963 - 1974

2. A novel rotary barrel finishing approach for high-performance bearing ring surfaces finishing simultaneously via floating clamp

   • Xuenan Li
   • Shengqiang Yang
   • Wenhui Li

   ORIGINAL ARTICLE 07 November 2022 Pages: 1975 - 1988

   

3. Study on the influence of ultrasonic-assisted cutting on the surface quality of CFRP

   • Xiaobo Wang
   • Chaosheng Song
   • Bo Zhao

   ORIGINAL ARTICLE 25 November 2022 Pages: 1989 - 2000

   

4. Machining performance in longitudinal-torsional ultrasonic-assisted core drilling of CFRP

   • ZiQiang Zhang
   • Feng Jiao
   • JingLin Tong

   ORIGINAL ARTICLE 30 November 2022 Pages: 2001 - 2015

   

5. Mechanism analysis and modeling of surface roughness for CeO₂ slurry-enhanced grinding BK7 optics

   • Xianpeng Zhang
   • Peng Yao
   • Hanlian Liu

   ORIGINAL ARTICLE 03 December 2022 Pages: 2017 - 2038

   

6. Process parameter optimization model for robotic abrasive belt grinding of aero-engine blades

   • Zhongqiang Yang
   • Zhi Huang
   • Han Yang

   ORIGINAL ARTICLE 16 December 2022 Pages: 2039 - 2054

   

7. Simulation of substrate temperature distribution during diamond film growth on zirconia with buffer layers by HFCVD method

   • Feng Lu
   • Tongxiang Zheng
   • Tianen Hao

   ORIGINAL ARTICLE 16 December 2022 Pages: 2055 - 2070

   

8. Flow field analysis of grinding fluid in double-face grinding

   • Xiannan Zou
   • Gensheng Zhang
   • Yunlong Yao

   ORIGINAL ARTICLE 21 December 2022 Pages: 2071 - 2085

   

9. Kinematics and improved surface roughness model in milling

   • Dewei Liu
   • Changhe Li
   • Shubham Sharma

   Original Article 28 December 2022 Pages: 2087 - 2108

   

10. Grinding characteristics of ultra-high strength steel by ultrasonic vibration-assisted grinding with microcrystalline alumina wheel

    • Junshuai Zhao
    • Biao Zhao
    • Shaopeng Li

    Original Article 28 December 2022 Pages: 2109 - 2121

    

11. Effect of pulse current parameters on electroplastically assisted dry cutting performance of W93NiFe alloy

    • Lixiang Zhao
    • Guangjun Chen
    • Jiashuai Huang

    Original Article 03 January 2023 Pages: 2123 - 2131

    

12. Optimization model for ultrasonic-assisted dry helical milling of CFRP based on genetic algorithm

    • Xue Wang
    • Feng Jiao
    • Ying Niu

    Original Article 03 January 2023 Pages: 2133 - 2143

    

13. Machinability evolution of gas–liquid-solid three-phase rotary abrasive flow finishing

    • Yunfeng Tan
    • Yesha Ni
    • Dapeng Tan

    Original Article 07 January 2023 Pages: 2145 - 2164

    

14. Investigation of machining property and sustainability performance of cryogenic turning of GH605 superalloy

    • Zhicheng Dai
    • Pei Yan
    • Xibin Wang

    ORIGINAL ARTICLE 16 January 2023 Pages: 2165 - 2189

    

15. Kinematics and machinability using bidirectional composite vibratory finishing

    • Yingbo Yang
    • Wenhui Li
    • Xiuhong Li

    ORIGINAL ARTICLE 21 January 2023 Pages: 2191 - 2206

    

16. Employment of cylindrical electrolytic copper grade electrode under EDMed Inconel 825 super alloy: emphasis on machining behavior accompanied with surface topography for sustainability

    • Nitin Kumar Sahu
    • Mukesh Kumar Singh
    • Anoop Kumar Sahu

    ORIGINAL ARTICLE 14 February 2023 Pages: 2207 - 2233

    

17. Residual stresses in ultrasonic vibration assistance turning cemented carbide

    • Mingjun Zhang
    • Xinbo Wang
    • Shuo Chen

    ORIGINAL ARTICLE 15 February 2023 Pages: 2235 - 2245

    

18. Nanoparticle-based cutting fluids in drilling: a recent review

    • Amna Adil
    • Taha Baig
    • Shahab Khushnood

    ORIGINAL ARTICLE 17 February 2023 Pages: 2247 - 2264

    

19. Edge breakage mechanism of optical glass surface in ultrasonic vibration-assisted milling

    • Jinglin Tong
    • Shuaikun Yang
    • Xiaobo Wang

    ORIGINAL ARTICLE 22 February 2023 Pages: 2265 - 2278

    

20. Milling mechanism and surface roughness prediction model in ultrasonic vibration-assisted side milling of Ti–6Al–4 V

    • Weiwei Ming
    • Chongyan Cai
    • Qinglong An

    ORIGINAL ARTICLE 27 February 2023 Pages: 2279 - 2293

    

21. Rail repair technology based on high-pressure abrasive water jet

    • Guo-zhe Yang
    • Tong-ming Liu
    • Wei-jun Liu

    ORIGINAL ARTICLE 05 April 2023 Pages: 2295 - 2310

    

22. Catalytic mechanism of tribochemical mechanical polishing on (0001) C-face of single crystal 6H-SiC substrate

    • Mingpu Xue
    • Wen Xiao
    • Jianxiu Su

    ORIGINAL ARTICLE 20 May 2023 Pages: 2311 - 2323

    

23. Modeling of grinding force in longitudinal ultrasonic vibration–assisted grinding alumina ceramics and experimental evaluation

    • Mingli Zhao
    • Boxi Xue
    • Lixin Nie

    ORIGINAL ARTICLE 23 May 2023 Pages: 2325 - 2339

    

24. Advance on surface finishing technology of precision bearing cylindrical rollers

    • Xingfu Wang
    • Xiuhong Li
    • Shengqiang Yang

    ORIGINAL ARTICLE 29 May 2023 Pages: 2341 - 2363

    

25. Research of dry tribochemical mechanical polishing SiC with an innovation abrasive-catalytic abrasive cluster

    • Zhankui Wang
    • Yangyang Ding
    • Jianxiu Su

    ORIGINAL ARTICLE 30 May 2023 Pages: 2365 - 2376

    

26. Mechanism and experimental evaluation on surface morphology of GCr15SiMn with ultrasonic vibration grinding

    • Daohui Xiang
    • Binghao Li
    • Bo Zhao

    ORIGINAL ARTICLE 02 June 2023 Pages: 2377 - 2387

    

27. Coupling mechanisms of static and dynamic loads during the ultrasonic impact strengthening of Ti-6Al-4V

    • Xuming Zha
    • Zhi Yuan
    • Feng Jiang

    ORIGINAL ARTICLE 03 June 2023 Pages: 2389 - 2405

    

28. Minimum quantity lubrication machining nickel base alloy: a comprehensive review

    • Shu Zhou
    • Dazhong Wang
    • Changhe Li

    ORIGINAL ARTICLE 17 June 2023 Pages: 2407 - 2445

    

29. Surface roughness in grinding outer ring inner raceway of tapered roller bearing

    • Guangdi Jin
    • Yufei Gao
    • Yuanchao Tang

    ORIGINAL ARTICLE 20 June 2023 Pages: 2447 - 2463

    

30. Machinability of SiC_f/SiC ceramic matrix composites using longitudinal-torsional coupled rotary ultrasonic machining

    • Jiangwei Jin
    • Xiaobo Wang
    • Bo Zhao

    ORIGINAL ARTICLE 30 June 2023 Pages: 2465 - 2476

    

31. Processing strategy of SiC_f/SiC composites during single grain scratching under minimum quantity lubrication

    • Qi Zhang
    • Ben Wang
    • Zhongao Shi

    ORIGINAL ARTICLE 04 July 2023 Pages: 2477 - 2495

    

32. A dynamic temperature condition monitoring method by vibration signal in grinding process

    • Xiangna Kong
    • Hong Yuan
    • Shichao Xiu

    ORIGINAL ARTICLE 07 July 2023 Pages: 2497 - 2507

    

33. Analysis of microcosmic geometric property in pre-stressed dry grinding process

    • Chunwei Xu
    • He Zhang
    • Cong Sun

    ORIGINAL ARTICLE 07 July 2023 Pages: 2509 - 2523

    

34. CBN wear behavior during a single-grain ultrasonic vibrations grinding PTMCs materials

    • Yansong Yue
    • Jiahao Song
    • Jiuhua Xu

    ORIGINAL ARTICLE 14 July 2023 Pages: 2525 - 2536

    

35. Analysis for green grinding of Ti-6Al-4V titanium alloys with profile rotating heat pipe-grinding wheel

    • Liyong Zhang
    • Jiajia Chen
    • Chenwei Dai

    ORIGINAL ARTICLE 14 July 2023 Pages: 2537 - 2549

    

36. Dressing principle and parameter optimization of ultrasonic-assisted diamond roller dressing WA grinding wheel using response surface methodology and genetic algorithm

    • Chenglong Li
    • Feng Jiao
    • Jinglin Tong

    ORIGINAL ARTICLE 17 July 2023 Pages: 2551 - 2568

    

37. Microstructure modification of grain refinement for 304 stainless steel induced by pre-stress grinding and control

    • Zhuangzhuang Hou
    • Shichao Xiu
    • Yunlong Yao

    ORIGINAL ARTICLE 20 July 2023 Pages: 2569 - 2582

    

38. Machinability of the uncoated and Ta–C-coated single-flute microdrills in dry machining of PCBs

    • Zhiqin Su
    • Xian Wu
    • Meiliang Yu

    Original Article 31 July 2023 Pages: 2583 - 2596

    

39. Axial and composite ultrasonic vibration-assisted face grinding of silicon carbide ceramics: grinding force and surface quality

    • Qihui Cheng
    • Chenwei Dai
    • Shengjun Yang

    Original Article 01 August 2023 Pages: 2597 - 2614

    

40. Dynamics model and simulation of outdoor AGV obstacle crossing without 3D model

    • Ying-bo Zhao
    • Shi-chao Xiu
    • Xin-yu Bu

    Original Article 02 August 2023 Pages: 2615 - 2624

    

41. Machining mechanism and stress model in cutting Ti6Al4V

    • Shujing Wu
    • Feiyang Chen
    • Jinzhong Lu

    ORIGINAL ARTICLE 05 August 2023 Pages: 2625 - 2639

    

42. Tool wear prediction method based on bidirectional long short-term memory neural network of single crystal silicon micro-grinding

    • Chengxi She
    • Kexin Li
    • Kun Shao

    ORIGINAL ARTICLE 08 August 2023 Pages: 2641 - 2651

    

43. Electrochemical machining process for micropit arrays using a rolling device with a linear cathode and a soft mask

    • Ge Qin
    • Meng Li
    • Shiwei Li

    ORIGINAL ARTICLE 09 August 2023 Pages: 2653 - 2665

    

44. Influence of Fenton-like reactions between hydrogen peroxide and ferric chloride on chemical mechanical polishing 304 stainless steel

    • Jiapeng Chen
    • Yanan Peng
    • Fenggang Lv

    ORIGINAL ARTICLE 12 August 2023 Pages: 2667 - 2675

    

45. Metal-bonded diamond wheel dressing by using wire electrical discharge: principle and prototype machine design

    • Laijun Zhang
    • Xiuzhi Wang
    • Jianyu Jia

    Original Article 18 August 2023 Pages: 2677 - 2690

    

46. A support vector regression-based method for modeling geometric errors in CNC machine tools

    • Chuanjing Zhang
    • Huanlao Liu
    • Yulin Wang

    ORIGINAL ARTICLE 06 September 2023 Pages: 2691 - 2705

    

47. Experimental insights and micrographical investigation on graphene nanoplatelet–reinforced aluminum cast composites

    • Tarun Kumar Kotteda
    • Manoj Kumar
    • Pramod Kumar

    ORIGINAL ARTICLE 06 September 2023 Pages: 2707 - 2718

    

48. Magnetic field-assisted finishing: mechanism, application, and outlook

    • Zhaokun Yan
    • Shengqiang Yang
    • Xingai Yao

    ORIGINAL ARTICLE 11 September 2023 Pages: 2719 - 2758

    

49. Critical depth of cut modeling and ductility domain removal mechanism in elliptical vibration-assisted cutting BK7 optical glass

    • Mingming Lu
    • Yakun Yang
    • Yongsheng Du

    ORIGINAL ARTICLE 12 September 2023 Pages: 2759 - 2770

    

50. Enhancing sustainability in Inconel 718 machining: temperature control with internally cooled tools

    • Gustavo Henrique Nazareno Fernandes
    • Lucas Melo Queiroz Barbosa
    • Álisson Rocha Machado

    Original Article 25 September 2023 Pages: 2771 - 2789