1. Review of dwell-time algorithms for magnetorheological finishing

   • Mingli Xie
   • Jiawei Cheng
   • Shijun Huang

   Critical Review 03 January 2024 Pages: 3151 - 3178

   

2. Cutting condition effects on microstructure and mechanical characteristics of Ni-based superalloys—a review

   • Ghulam Mustafa
   • Binxun Li
   • Song Zhang

   Critical Review 05 January 2024 Pages: 3179 - 3209

   

3. Virtual metrology for enabling zero-defect manufacturing: a review and prospects

   • Yaxuan Zhang
   • Li Li
   • Qingyun Yu

   Critical Review 09 January 2024 Pages: 3211 - 3227

   

4. Analysis on tire derivate aggregate in mortar and concrete for manufacturing applications

   • Saravanakumar M
   • Venkatesan G

   ORIGINAL ARTICLE 12 May 2023 Pages: 3229 - 3243

   

5. Exogenous input autoregressive model based on mixed variables for offline prediction thermal errors of CNC Swiss lathes

   • Shan Wu
   • Lingfei Kong
   • Xiaoyang Feng

   ORIGINAL ARTICLE 28 December 2023 Pages: 3245 - 3256

   

6. Improvement in mechanical and microstructural properties of novel TA7/Nb/Cu/SS304 composite joints by reducing intermetallic compounds

   • Muhammad Jawad
   • Mirza Jahanzaib
   • Naveed Ahmed

   ORIGINAL ARTICLE 29 December 2023 Pages: 3257 - 3274

   

7. Real-time chatter detection based on fast recursive variational mode decomposition

   • Yezhong Lu
   • Haifeng Ma
   • Zhanqiang Liu

   ORIGINAL ARTICLE 29 December 2023 Pages: 3275 - 3289

   

8. Graphic-enhanced collision detection for robotic manufacturing applications in complex environments

   • Jing-Rong Li
   • Rui-Hui Xin
   • Hai-Long Xie

   ORIGINAL ARTICLE 29 December 2023 Pages: 3291 - 3305

   

9. A comparative study on the effect of deep and shallow cryogenic electrodes on tool wear rate and overcut with waste bio-oil in electric discharge machining

   • Muhammad Sana
   • Kashif Ishfaq
   • Muhammad Arif Mahmood

   ORIGINAL ARTICLE 29 December 2023 Pages: 3307 - 3322

   

10. Research on fabricating Cu/stainless steel composite thin strips by two-pass cold roll-bonding with intermediate annealing

    • Xiaomiao Niu
    • Qingshan Ding
    • Tao Wang

    ORIGINAL ARTICLE 30 December 2023 Pages: 3323 - 3339

    

11. Sustainable coating solutions: a comparative life cycle analysis of electrophoretic deposition and electroplating for graphene-reinforced anti-wear coatings

    • Gabriele Baiocco
    • Daniel Salvi
    • Nadia Ucciardello

    ORIGINAL ARTICLE 30 December 2023 Pages: 3341 - 3354

    

12. Microstructure, hardness, and wear resistance at room and high temperature of Stellite-6/WC-6Co coatings deposited by laser cladding process

    • Christian Félix-Martínez
    • Juan Manuel Salgado-López
    • Celso Eduardo Cruz-González

    ORIGINAL ARTICLE 02 January 2024 Pages: 3355 - 3371

    

13. Development of a kiln petcoke mill predictive model based on a multi-regression XGBoost algorithm

    • Mohammed Toum Benchekroun
    • Smail Zaki
    • Fatoumata Diassana

    ORIGINAL ARTICLE 02 January 2024 Pages: 3373 - 3386

    

14. Systematic approach to improve overlap laser welding of AA5052-H32 with dissimilar thickness by evaluation of mechanical performance, undercut, and welding penetration

    • Pedram Farhadipour
    • Narges Omidi
    • Abderrazak El Ouafi

    ORIGINAL ARTICLE 02 January 2024 Pages: 3387 - 3399

    

15. Prediction of surface topography in face gear grinding based on dynamic contour interferometric sampling method

    • Song Gao
    • Xiaofan Ma
    • Zhengminqing Li

    ORIGINAL ARTICLE 03 January 2024 Pages: 3401 - 3418

    

16. Semi-solid plasticity and deformation control of superalloy investment casting

    • Zhengyi Ding
    • Donghong Wang
    • Baode Sun

    ORIGINAL ARTICLE 04 January 2024 Pages: 3419 - 3429

    

17. Effect of ball burnishing process on surface roughness and corrosion behavior of S235JR steel

    • Abderraouf Madjdi Mebarek
    • Mounira Bourebia
    • Nassim Bouchelaghem

    ORIGINAL ARTICLE 04 January 2024 Pages: 3431 - 3444

    

18. Numerical multi-objective optimization of segmented and variable blank holder force trajectories in deep drawing based on DNN-GA-MCS strategy

    • Feng Guo
    • Hoyoung Jeong
    • Naksoo Kim

    ORIGINAL ARTICLE 04 January 2024 Pages: 3445 - 3468

    

19. Knowledge driven multiview bill of material reconfiguration for complex products in the digital twin workshop

    • Yunrui Wang
    • Yaodong Wang
    • Ziqiang Jiang

    ORIGINAL ARTICLE 04 January 2024 Pages: 3469 - 3480

    

20. Robust weld seam tracking method based on detection and tracking of laser stripe

    • Nianfeng Wang
    • Jialin Yang
    • Kaifan Zhong

    ORIGINAL ARTICLE 05 January 2024 Pages: 3481 - 3493

    

21. A novel surface topography prediction method for hybrid robot milling considering the dynamic displacement of end effector

    • Xuda Qin
    • Yifei Li
    • Hao Li

    ORIGINAL ARTICLE 05 January 2024 Pages: 3495 - 3508

    

22. Influence of welding position and dilution on mechanical properties and strengthening design of flux cored arc weld metal for high manganese steels

    • Sukil Park
    • Juyeon Won
    • Namhyun Kang

    ORIGINAL ARTICLE 05 January 2024 Pages: 3509 - 3523

    

23. Roles of digital twins on material performances and utilization on upstream industry (The case of automotive industry)

    • Alie Wube Damtew

    ORIGINAL ARTICLE 05 January 2024 Pages: 3525 - 3536

    

24. Surface roughness and tool wear monitoring in turning processes through vibration analysis using PSD and GRMS

    • Roumaissa Bouchama
    • Mohamed Lamine Bouhalais
    • Abdelhakim Cherfia

    ORIGINAL ARTICLE 05 January 2024 Pages: 3537 - 3552

    

25. Twin-screw extrusion of short Kevlar fiber–reinforced nylon composite filaments with enhanced mechanical properties and morphology

    • Gangjian Guo
    • Victoria L. Finkenstadt
    • Reza Rizvi

    ORIGINAL ARTICLE 05 January 2024 Pages: 3553 - 3559

    

26. Contrastive deep clustering for detecting new defect patterns in wafer bin maps

    • Insung Baek
    • Seoung Bum Kim

    ORIGINAL ARTICLE 05 January 2024 Pages: 3561 - 3571

    

27. Experimental investigating pure tungsten cathode behavior in argon AC-TIG welding

    • Leila Belgacem
    • Samira Benharat
    • Mounir Sakmeche

    ORIGINAL ARTICLE 05 January 2024 Pages: 3573 - 3581

    

28. Five-axis toolpath re-scheduling for facilitating assisted supporting thin-walled blade machining by decreasing axis sensitivity

    • Pei-Yao Li
    • De-Ning Song
    • Xin Ma

    ORIGINAL ARTICLE 05 January 2024 Pages: 3583 - 3607

    

29. Evaluation of the optimal cutting performance of high-speed steel and tungsten carbide cutting tools in the machining of AISI 304 steel

    • Alfred Eviwanrherhe Aboloje
    • Samuel Oro-oghene Sada
    • Jonathan Eyenubo

    ORIGINAL ARTICLE 05 January 2024 Pages: 3609 - 3617

    

30. Enhancing plasma arc penetration ability with radial gas flow

    • Fei Liu
    • XingPei Wu
    • ZuMing Liu

    ORIGINAL ARTICLE 05 January 2024 Pages: 3619 - 3630

    

31. Increasing strength and ductility of extruded polylactic acid matrix composites using short polyester and continuous carbon fibers

    • Dongyang Cao

    Original Article 05 January 2024 Pages: 3631 - 3647

    

32. Densification, microstructure, and nanomechanical evaluation of pulsed electric sintered zirconia-silicon nitride reinforced Ti-6Al-4 V alloy

    • Olakunle Anthony Ogunmefun
    • Peter Apata Olubambi
    • Kibambe Ngeleshi

    ORIGINAL ARTICLE Open access 05 January 2024 Pages: 3649 - 3660

    

33. Characterization and modelling of fracture in press-hardened Ductibor^® 1000-AS:Usibor^® 1500-AS laser-welded blanks

    • Pedram Samadian
    • Clifford Butcher
    • Michael J. Worswick

    ORIGINAL ARTICLE 05 January 2024 Pages: 3661 - 3683

    

34. Hybrid scheduling method for automatic guided vehicles in intelligent warehouses considering power management

    • Guoliang Fan
    • Zuhua Jiang

    Original Article 08 January 2024 Pages: 3685 - 3695

    

35. A data-driven high-precision modeling method of machine tool spatial error under the influence of Abbe error

    • Lin Zhang
    • Zhigang Jiang
    • Yongwen Hu

    ORIGINAL ARTICLE 08 January 2024 Pages: 3697 - 3707

    

36. Clogging monitoring and regeneration of filtration film in wafer cleaning circulation systems for semiconductor manufacturing

    • Tian-Shiang Yang
    • Ting-Shiang Chai
    • Kuo-Shen Chen

    ORIGINAL ARTICLE 08 January 2024 Pages: 3709 - 3720

    

37. Material removal and surface generation mechanisms in rotary ultrasonic vibration–assisted aspheric grinding of glass ceramics

    • Guoyan Sun
    • Sheng Wang
    • Jiaoteng Ding

    ORIGINAL ARTICLE 08 January 2024 Pages: 3721 - 3740

    

38. Hazardous effects and microstructure of explosive welding under vacuum environment

    • Xuejiao Li
    • Tingzhao Zhang
    • Yandong Cui

    ORIGINAL ARTICLE 08 January 2024 Pages: 3741 - 3754

    

39. An improved method for calculating roll deformation of six-high rolling mill: enhances computation speed and accuracy

    • Yafei Chen
    • Pingjie Feng
    • Changsheng Li

    ORIGINAL ARTICLE 08 January 2024 Pages: 3755 - 3770

    

40. Investigation of fiber waviness in fused deposition modeling printed continuous fiber-reinforced polymers

    • Halston J. C. Sandford
    • Yunlong Tang
    • Guoying Dong

    ORIGINAL ARTICLE 08 January 2024 Pages: 3771 - 3780

    

41. Mechano-thermic reduction of low-grade titanium ore for high-grade TiO₂ synthesis

    • Tajudeen Mojisola
    • Munyadziwa Mercy Ramakokovhu
    • Peter Apata Olubambi

    ORIGINAL ARTICLE Open access 09 January 2024 Pages: 3781 - 3788

    

42. Study on robot automatic rounding for blade tip based on elastic grinding

    • Fengjie Tian
    • Zijian Qi
    • Ruilin Li

    ORIGINAL ARTICLE 09 January 2024 Pages: 3789 - 3804

    

43. A real-time seam tracking system based on extraction and restoration model in robotic GMAW

    • Xiaohui Zhao
    • Bin Yang
    • Hao Wang

    Original Article 09 January 2024 Pages: 3805 - 3818

    

44. Experimental investigation on the suitability of dual fluid system-assisted ECM (DF-ECM) and the influence of magnet in machining of SS304

    • Deepak Janardhanan
    • Hariharan Perianna

    ORIGINAL ARTICLE 09 January 2024 Pages: 3819 - 3836

    

45. Study on grinding removal mechanism and subsurface damage of bionic layered graphene ceramic matrix composites

    • Yunguang Zhou
    • Ji Zou
    • Ming Li

    ORIGINAL ARTICLE 09 January 2024 Pages: 3837 - 3849

    

46. Study of spray-mist-assisted laser processing of micro-structures on CVD diamond surface

    • Bing Guo
    • Zhenfei Guo
    • Lei Xu

    ORIGINAL ARTICLE 09 January 2024 Pages: 3851 - 3865

    

47. Effects of passivation behavior on micro-electrochemical machining (ECM) performance of stainless steels with different metallographic phases in NaNO₃ and NaClO₃ solutions

    • Guodong Liu
    • Jingyao Shi
    • Chaojiang Li

    ORIGINAL ARTICLE 09 January 2024 Pages: 3867 - 3876

    

48. Study on the surface formation mechanism and theoretical model of brittle surface roughness in turning machinable ceramics

    • Jing Jia
    • Lianjie Ma
    • Ming Li

    ORIGINAL ARTICLE 10 January 2024 Pages: 3877 - 3889

    

49. Equivalent load model for the numerical simulation of integrated induction heating and mechanical rolling forming of curved hull plates

    • Zhenshuai Wei
    • Yao Zhao
    • Lichun Chang

    ORIGINAL ARTICLE 10 January 2024 Pages: 3891 - 3903

    

50. Stability for multiple delays machining system with variable pitch tools considering nonlinear cutting force coefficients

    • Wanying Nie
    • Chunsheng He
    • Minli Zheng

    ORIGINAL ARTICLE 10 January 2024 Pages: 3905 - 3916