1. A correlation among industry 4.0, additive manufacturing, and topology optimization: a state-of-the-art review

   • Kashif Ishfaq
   • Muhammad Dawar Azhar Khan
   • Muhammad Asad Maqsood

   Critical Review 03 November 2023 Pages: 3771 - 3797

   

2. Clinched joining mechanical performance in multiple states

   • Chunyu Song
   • Lei Lei
   • Ming Yan

   Critical Review 04 November 2023 Pages: 3799 - 3812

   

3. Electrochemical dissolution behavior of passive films of titanium matrix composites in NaCl solution

   • Xin Ma
   • Xiaoyun Hu
   • Hansong Li

   ORIGINAL ARTICLE 01 November 2023 Pages: 3813 - 3828

   

4. Deep learning approaches for improving robustness in real-time 3D-object positioning and manipulation in severe lighting conditions

   • Chih-Hung G. Li
   • Jui-Ting Wu

   ORIGINAL ARTICLE 01 November 2023 Pages: 3829 - 3847

   

5. Thermomechanical effect on the properties of stainless steels using rotative friction welding: an experimental study on 304L and 316L grades

   • Fatima Zohra Arzour
   • Mouna Amara
   • Mohammed Hadj Meliani

   Original Article 01 November 2023 Pages: 3849 - 3861

   

6. Comparison of mechanical performance of different geotextiles manufactured from natural fibers subjected to environmental biodegradation

   • Francisco Sandro Rodrigues Holanda
   • Luiz Diego Vidal Santos
   • Sandro Griza

   ORIGINAL ARTICLE 01 November 2023 Pages: 3863 - 3873

   

7. Electrostatic induction–based online monitoring of grinding wheel wear

   • Pengtao Li
   • Heng Jiang
   • Jiachen Guo

   ORIGINAL ARTICLE 01 November 2023 Pages: 3875 - 3887

   

8. Lubrication performance of nano-molybdenum disulfide as additive in drilling fluid in polycrystalline diamond compacts

   • Ruyi Gou
   • Jingjing Chen
   • Xun Luo

   ORIGINAL ARTICLE 01 November 2023 Pages: 3889 - 3899

   

9. A novel framework for designing and manufacturing cranial prostheses through incremental sheet metal forming

   • Shuo Zheng
   • Ali Abd El-Aty
   • Cheng Cheng

   ORIGINAL ARTICLE 02 November 2023 Pages: 3901 - 3916

   

10. Powder loading rate impact on the performances of sintered MnZn ferrites fabricated by powder injection moulding

    • Ulrich Soupremanien
    • Hugo Dayde
    • Myriam Dalmasso

    Original Article 02 November 2023 Pages: 3917 - 3931

    

11. Study on tool wear and cutting performance of CFRP for inclined angle milling

    • Tao Chen
    • Jiaqiang Liu
    • Maoyue Li

    ORIGINAL ARTICLE 02 November 2023 Pages: 3933 - 3947

    

12. Investigation of the effects of process parameters on hydrodynamic deep drawing of AL-1050 sheet with indentations using genetic algorithm–based optimization

    • Hossein Ghorbani-Menghari
    • Majid Mohammadhosseinzadeh
    • Ji Hoon Kim

    ORIGINAL ARTICLE 02 November 2023 Pages: 3949 - 3964

    

13. Effect of anisotropy on spring-back of pre-punched profiles in cold roll forming process: an experimental and numerical investigation

    • Saeid Hajiahmadi
    • Hassan Moslemi Naeini
    • Ali Zeinolabedin-Beygi

    Original Article 02 November 2023 Pages: 3965 - 3978

    

14. Robotic grasping and assembly of screws based on visual servoing using point features

    • Tiantian Hao
    • De Xu

    ORIGINAL ARTICLE 02 November 2023 Pages: 3979 - 3991

    

15. A pragmatic optimization-based approach for analysis and configuration of a reconfigurable multi-product assembly line in the automotive industry

    • Paul Stief
    • Guillaume Burgat
    • Ali Siadat

    ORIGINAL ARTICLE 03 November 2023 Pages: 3993 - 4010

    

16. Study of beam wobbling technique and porosity formation in laser welding of ultra-thin AA1050 sheet—microstructural and mechanical analysis

    • Venkat Vivek Pamarthi
    • Coomar Sudarsan
    • Sushanta Kumar Panda

    ORIGINAL ARTICLE 03 November 2023 Pages: 4011 - 4029

    

17. Mechanical property estimation for additive manufacturing parts with supports

    • Emre Günaydın
    • Erkan Gunpinar

    ORIGINAL ARTICLE 03 November 2023 Pages: 4031 - 4044

    

18. Building a cloud-based digital twin for remote monitoring and control of a robotic assembly system

    • Md Tahmid Bin Touhid
    • Mrunal Marne
    • Sheng Yang

    Original Article 03 November 2023 Pages: 4045 - 4057

    

19. Numerical and experimental investigation of thin-walled bellows considering non-uniform wall thickness under displacement load

    • Yuanyuan Ma
    • Jianming Zhang
    • Tianyi Su

    ORIGINAL ARTICLE 03 November 2023 Pages: 4059 - 4072

    

20. CNC milling cutters condition monitoring based on empirical wavelet packet decomposition

    • Abir Amar Bouzid
    • Boualem Merainani
    • Djamel Benazzouz

    ORIGINAL ARTICLE 03 November 2023 Pages: 4073 - 4089

    

21. Jet electrochemical milling of Ti-6Al-4 V alloy with ultra-high current density

    • Huanghai Kong
    • Ningsong Qu

    ORIGINAL ARTICLE 03 November 2023 Pages: 4091 - 4100

    

22. Research on automatic analysis and layout system of the stamping process for automotive panels and its key technologies

    • Chuipin Kong
    • Jialin Lei
    • Xiong Hui Zhou

    ORIGINAL ARTICLE 04 November 2023 Pages: 4101 - 4120

    

23. Fabrication of automotive titanium bipolar plates by uniform pressure electromagnetic incremental forming based on arc spiral coil

    • Qiangkun Wang
    • Junrui Xu
    • Yuanfeng Wang

    Original Article 04 November 2023 Pages: 4121 - 4147

    

24. Research on deviation correction of curve-surface gear in solar alpha rotary joint processed by free form milling

    • Xinxin Ye
    • Luhe Zhang
    • Bingkui Chen

    Original Article 04 November 2023 Pages: 4149 - 4164

    

25. The effects of welding parameters on metal transfer and bead properties in the variable-polarity GMAW of mild steel

    • Min Zeng
    • ZhiTao Li
    • Wei Zhang

    ORIGINAL ARTICLE 04 November 2023 Pages: 4165 - 4183

    

26. Longitudinal ultrasonic vibration effects on grinding mechanism in side and end grinding of 2.5D Cf/SiC composites

    • Zhenyan Duan
    • Tao Chen
    • Fengyu Liu

    Original Article 04 November 2023 Pages: 4185 - 4199

    

27. Optimization of process parameters in friction stir welding of 2219 aluminum alloy thick plate

    • Xiaohong Lu
    • Yihan Luan
    • Steven Y. Liang

    ORIGINAL ARTICLE 04 November 2023 Pages: 4201 - 4215

    

28. Investigating the wear performance of AZ91D magnesium composites with ZnO, MnO, and TiO₂ nanoparticles

    • Annamalai Gnanavelbabu
    • Elayarasan Vinothkumar
    • Muthu Prahadeeswaran

    Original Article Open access 04 November 2023 Pages: 4217 - 4237

    

29. Adiabatic shear behavior and cutting force prediction modeling of FV520B steel

    • Longyun Yang
    • Chunzheng Duan
    • Minjie Wang

    ORIGINAL ARTICLE 04 November 2023 Pages: 4239 - 4255

    

30. Modelling and prediction of twist springback for UHSS thin-walled component with asymmetric complex section in roll forming process

    • Jiaojiao Cheng
    • Jianguo Cao
    • Rongguo Zhao

    ORIGINAL ARTICLE 04 November 2023 Pages: 4257 - 4274

    

31. Cable path optimization by fixing multiple guides on one link for industrial robot arms

    • Shintaro Iwamura
    • Yoshiki Mizukami
    • Fumitoshi Matsuno

    ORIGINAL ARTICLE 06 November 2023 Pages: 4275 - 4292

    

32. Study of the effect of heat treatment of copper slag particles on abrasiveness for abrasive waterjet cutting

    • Gennady Barsukov
    • Tatyana Zhuravleva
    • Olga Kozhus

    ORIGINAL ARTICLE 06 November 2023 Pages: 4293 - 4300

    

33. Finite element simulation and experimental study of non-blank holder forward and backward composite deep drawing earing test

    • Pengcheng Fu
    • Yu Zhang
    • Gaochao Yu

    ORIGINAL ARTICLE 06 November 2023 Pages: 4301 - 4316

    

34. The effect of high-pressure cutting fluid supply on the chip breakability of lead-free brass alloys

    • Magdalena Susanne Müller
    • Kilian Brans
    • Thomas Bergs

    ORIGINAL ARTICLE Open access 06 November 2023 Pages: 4317 - 4333

    

35. Study on removal of recast layer of NiTi shape memory alloy machined with magnetic field-assisted WEDM-ECM complex process

    • Yan Wang
    • Cai-Cong Tang
    • Wei Xiong

    ORIGINAL ARTICLE 06 November 2023 Pages: 4335 - 4354

    

36. Error introduced by direct 3D printing of compression samples of PLA made by FDM process

    • Silvia Ilaria Scipioni
    • Francesco Lambiase

    ORIGINAL ARTICLE Open access 07 November 2023 Pages: 4355 - 4368

    

37. Three-dimensional analytical model for residual stress in the weld of thick plates by friction stir welding

    • Haidong Yu
    • Chang Gao
    • Wei Chen

    ORIGINAL ARTICLE 07 November 2023 Pages: 4369 - 4381

    

38. Inter-relationship between residual stresses, microstructural evolutions, and mechanical responses of heat-treatable aluminum alloys during welding: a numerical and experimental study

    • Ardeshir Sarmast
    • Siamak Serajzadeh

    ORIGINAL ARTICLE 07 November 2023 Pages: 4383 - 4398

    

39. Visualization of melt pool stability for wire- and powder-based directed energy deposition repair of gray cast iron

    • Jakob D. Hamilton
    • Iris V. Rivero

    ORIGINAL ARTICLE 07 November 2023 Pages: 4399 - 4405

    

40. Particle method simulation of direct-chill casting process including breakout

    • Hitoshi Tokunaga
    • Yuichi Motoyama
    • Toshimitsu Okane

    ORIGINAL ARTICLE 07 November 2023 Pages: 4407 - 4418

    

41. Investigation into the effect of the SLM processing parameters on the microstructure and mechanical behavior of M300; experimental and statistical analysis

    • Narges Omidi
    • Pedram Farhadipour
    • Noureddine Barka

    Original Article 07 November 2023 Pages: 4419 - 4434

    

42. Dynamic analysis and surface morphology prediction for deep cavity turning of bent-blade cutter

    • Xiaojuan Wang
    • Qinghua Song

    ORIGINAL ARTICLE 07 November 2023 Pages: 4435 - 4455

    

43. The optimization of residual stress in arc bridge Hastelloy X components fabricated by Laser Powder Bed Fusion

    • Yi Liu
    • Xuewei Fang
    • Ke Huang

    ORIGINAL ARTICLE 07 November 2023 Pages: 4457 - 4471

    

44. Optimization of process parameters in friction stir welding of dissimilar aluminum alloys (AA6061–T6 and AA5052–H32)

    • Wondu Tesfaye Heramo
    • Henok Zewdu Workneh

    ORIGINAL ARTICLE 07 November 2023 Pages: 4473 - 4489

    

45. Finite element method and its application to cutting processes of stone–plastic composite

    • Zhanwen Wu
    • Dietrich Buck
    • Zhaolong Zhu

    ORIGINAL ARTICLE 07 November 2023 Pages: 4491 - 4508

    

46. On material flow behavior, strain energy, and improved surface integrity ratio in subsequent burnishing after turning

    • Peirong Zhang
    • Guosheng Ji
    • Zhanqiang Liu

    ORIGINAL ARTICLE 07 November 2023 Pages: 4509 - 4528

    

47. Research on reconstruction and high-precision detection of tool wear edges under complex lighting environmental influences

    • Ting Lei
    • Bin Zou
    • Jikai Liu

    ORIGINAL ARTICLE 08 November 2023 Pages: 4529 - 4540

    

48. A new method for tool wear monitoring based on small sample size

    • Bo Qin
    • Kuo Liu
    • Yongqing Wang

    ORIGINAL ARTICLE 08 November 2023 Pages: 4541 - 4551

    

49. Prediction of the mechanical behavior of steel-aluminum flow drill screw joints using artificial neural network

    • Qiaoying Zhou
    • Zhong Yang
    • Luoxing Li

    ORIGINAL ARTICLE 08 November 2023 Pages: 4553 - 4567

    

50. Influence of parameters on performance characteristics and defects during laser microdrilling of titanium alloys using RSM

    • Suman Chatterjee
    • Siba Sankar Mahapatra
    • Dermot Brabazon

    Original Article 08 November 2023 Pages: 4569 - 4587