1. Research progress of nanolubrication for rolling process

   • Linan Ma
   • Xiaoguang Ma
   • Jingwei Zhao

   Critical Review 26 September 2023 Pages: 999 - 1015

   

2. Development of microstructure simulation methods of laser cladding layer

   • Ganzhong Ma
   • Guohe Li
   • Zhihua Shao

   Critical Review 26 September 2023 Pages: 1017 - 1034

   

3. Surface integrity and fatigue life test of products under coupling grinding force and temperature

   • Lai Hu
   • Jun Zha
   • Yaolong Chen

   ORIGINAL ARTICLE 26 September 2023 Pages: 1035 - 1052

   

4. Magnetic-field-assisted abrasive sensing and its deployment in electroplated diamond cutting wires

   • Chao-Ching Ho
   • Bo-En Tsai

   Original Article 26 September 2023 Pages: 1053 - 1069

   

5. Investigation on surface integrity and process parameter optimisation of carburised 18CrNiMo7-6 steel by induction-heating-assisted ultrasonic surface rolling process

   • Zhihua Liu
   • Lingshuo Zheng
   • Shengwei Qin

   ORIGINAL ARTICLE 26 September 2023 Pages: 1071 - 1086

   

6. Identification of rheological parameters and numerical simulation for orthogonal machining of AISI 52100 hard steel

   • Zoubir Aich
   • Kamel Haddouche
   • Abdelhamid Ghezal

   Original Article 26 September 2023 Pages: 1087 - 1095

   

7. Predictive modeling of porosity in AlSi10Mg alloy fabricated by laser powder bed fusion: A comparative study with RSM, ANN, FL, and ANFIS

   • Ahmad Memaran Babakan
   • Mohammad Davoodi
   • Hongyan Zhang

   ORIGINAL ARTICLE 26 September 2023 Pages: 1097 - 1108

   

8. Study on diffractive optical characteristics and elimination methods of diamond fly-cutting optical plane

   • Yawen Guo
   • Ziqiang Yin
   • Senbin Xia

   ORIGINAL ARTICLE 26 September 2023 Pages: 1109 - 1126

   

9. Relationship between surface characteristics and the fatigue life of deep rolled AISI 4140 steel

   • Augusto Moura Martins
   • Diogo Azevedo de Oliveira
   • Alexandre Mendes Abrão

   ORIGINAL ARTICLE 26 September 2023 Pages: 1127 - 1143

   

10. Influence of methane flow ratios on the structural and mechanical properties of Ti-doped diamond-like carbon films

    • Wei-Hsiang Lee
    • Chih-Chung Hu
    • Chun-Yao Hsu

    Original Article 26 September 2023 Pages: 1145 - 1157

    

11. Experimental and predictive analysis of the molding behavior of a PA6 glass mat thermoplastic (GMT)

    • Dominik Dörr
    • Navraj Singh-Heer
    • Andrew Hrymak

    ORIGINAL ARTICLE 27 September 2023 Pages: 1159 - 1173

    

12. Experimental study on the machining performance of nickel-based superalloy GH4169 milled by AWJ

    • Weijie Zhang
    • Dun Liu
    • Shaochuan Feng

    ORIGINAL ARTICLE 27 September 2023 Pages: 1175 - 1188

    

13. A systematic spatial-variably volumetric error model and machining optimization method based on continuous moving support variation of machine tool

    • Xiaojian Liu
    • Jiarun Xu
    • Zhaolei He

    Original Article 27 September 2023 Pages: 1189 - 1211

    

14. Effects of ultrasonic vibrations on brazing mechanism and evaluating grinding performance of CBN tools

    • Xiaowei Wang
    • Kaida Cai
    • Jiuhua Xu

    ORIGINAL ARTICLE 27 September 2023 Pages: 1213 - 1225

    

15. Longitudinal-torsional coupled rotary ultrasonic machining end surface grinding of SiC_f/SiC composites: a mechanical model of cutting force

    • Wenbo Bie
    • Fan Chen
    • Bo Zhao

    ORIGINAL ARTICLE 27 September 2023 Pages: 1227 - 1248

    

16. A vision-based hole quality assessment technique for robotic drilling of composite materials using a hybrid classification model

    • Stephen K. H. Lee
    • Alexej Simeth
    • Conor T. McCarthy

    ORIGINAL ARTICLE 27 September 2023 Pages: 1249 - 1258

    

17. Fabrication of depth-controlled high-quality holes and lines on a metal surface by nanosecond laser pulses at 1064 nm

    • Keisuke Sota
    • Kota Ando
    • Takashi Nakajima

    ORIGINAL ARTICLE 27 September 2023 Pages: 1259 - 1268

    

18. Fault detection and diagnosis using two-stage attention-based variational LSTM in electrolytic copper manufacturing process

    • Jaejin Yoo
    • Seunghwan Song
    • Jun-Geol Baek

    ORIGINAL ARTICLE 27 September 2023 Pages: 1269 - 1288

    

19. Study on tool wear during hybrid laser additive and milling subtractive manufacturing

    • Liangliang Li
    • Xin Pan
    • Zhifeng Liu

    Original Article 27 September 2023 Pages: 1289 - 1300

    

20. Stability analysis and chatter suppression of ultrasonic elliptical vibration milling of Ti-6Al-4V alloy

    • Yuemin Zhang
    • Xiaobo Wang
    • Bo Zhao

    ORIGINAL ARTICLE 27 September 2023 Pages: 1301 - 1314

    

21. Integrated computational framework for controlling dimensional accuracy of thin-walled turbine blades during investment casting

    • Daiyin Zhao
    • Leyao Zhou
    • Baode Sun

    ORIGINAL ARTICLE 27 September 2023 Pages: 1315 - 1328

    

22. Optimization of FDM manufacturing parameters for the compressive behavior of cubic lattice cores: an experimental approach by Taguchi method

    • Md Mazedur Rahman
    • Jakiya Sultana
    • Ammar Ahmed

    ORIGINAL ARTICLE Open access 28 September 2023 Pages: 1329 - 1343

    

23. The evaluation of workpiece deformability for the process of two-stage extrusion of hollow hull

    • Igramotdin S. Aliiev
    • Roman I. Sivak
    • Vladymyr N. Levchenko

    ORIGINAL ARTICLE 28 September 2023 Pages: 1345 - 1353

    

24. Milling tool condition monitoring for difficult-to-cut materials based on NCAE and IGWO-SVM

    • Siqi Wang
    • Shichao Yan
    • Yuwen Sun

    ORIGINAL ARTICLE 29 September 2023 Pages: 1355 - 1374

    

25. Surface quality prediction by machine learning methods and process parameter optimization in ultra-precision machining of AISI D2 using CBN tool

    • Ugonna Loveday Adizue
    • Amanuel Diriba Tura
    • Márton Takács

    ORIGINAL ARTICLE Open access 29 September 2023 Pages: 1375 - 1394

    

26. A novel wheel path generation approach for grinding taper end-mills subjected to variable cross-section

    • Liming Wang
    • Jianping Yang
    • Jianfeng Li

    Original Article 30 September 2023 Pages: 1395 - 1411

    

27. Tailoring surface morphology and integrity of Inconel 718 using reciprocating Mo-wire and different discharge energy levels of WED-machining

    • Giovani Conrado Carlini
    • Rahul Davis
    • Fred Lacerda Amorim

    ORIGINAL ARTICLE 30 September 2023 Pages: 1413 - 1424

    

28. Reduction of ASZ size and enhancement of mechanical properties of TLP bonded IN718 joint using post bond heat treatment process

    • Uttam Kumar Tarai
    • Sukhomay Pal
    • Puthuveettil Sreedharan Robi

    ORIGINAL ARTICLE 30 September 2023 Pages: 1425 - 1442

    

29. Residual stress analysis of TC4/Inconel718 functionally graded material produced by laser additive manufacturing based on progressive activation element method

    • Hongjian Zhao
    • Chi Gao
    • Yu Zhan

    ORIGINAL ARTICLE 30 September 2023 Pages: 1443 - 1453

    

30. Thermal effect modeling of axial static stiffness of motorized spindle unit

    • Teng Liu
    • Haonan Xu
    • Liang Zhou

    ORIGINAL ARTICLE 30 September 2023 Pages: 1455 - 1471

    

31. Investigations on surface modification of nickel-based superalloy subjected to ultrasonic surface rolling process

    • Weiwei Yu
    • Jie Wu
    • Ming Chen

    Original Article 30 September 2023 Pages: 1473 - 1488

    

32. Effect of cryogenic cooling on residual stresses and surface finish of 316L during hybrid manufacturing

    • Ed Claudio Bordinassi
    • Vanessa Seriacopi
    • Adalto de Farias

    ORIGINAL ARTICLE 02 October 2023 Pages: 1489 - 1502

    

33. Hot workability behaviour of two P92 creep resistant steels: Constitutive analysis

    • Japheth Obiko
    • David Whitefield
    • Micheal Bodunrin

    ORIGINAL ARTICLE Open access 03 October 2023 Pages: 1503 - 1512

    

34. A study on the tribological behavior of water-based nanolubricant during corrugated rolling of copper plates

    • Linan Ma
    • Junjie Lian
    • Jingwei Zhao

    ORIGINAL ARTICLE 03 October 2023 Pages: 1513 - 1526

    

35. An adaptive matrix material extrusion optimization model for in situ impregnated continuous fiber-reinforced 3D printing

    • Jinxiu Yang
    • Yingxin Ma
    • Yuan Yao

    ORIGINAL ARTICLE 03 October 2023 Pages: 1527 - 1545

    

36. Defect inspection in semiconductor images using FAST-MCD method and neural network

    • Jinkyu Yu
    • Songhee Han
    • Chang-Ock Lee

    ORIGINAL ARTICLE 03 October 2023 Pages: 1547 - 1565

    

37. A novel framework using FEM and machine learning models with experimental verification for Inconel-718 rapid part qualification by laser powder bed fusion

    • Muhammad Arif Mahmood
    • Usman Tariq

    ORIGINAL ARTICLE 03 October 2023 Pages: 1567 - 1584

    

38. Numerical investigation of the surface recrystallization during the extrusion of a AA6082 aluminum alloy under different process conditions

    • Marco Negozio
    • Riccardo Pelaccia
    • Barbara Reggiani

    ORIGINAL ARTICLE 04 October 2023 Pages: 1585 - 1599

    

39. Increased wear resistance of cultivator coulters coated with Fe–Cr-Nb cladding and evaluated in field conditions: sandy and compacted soil in southern Brazil

    • Renan Adrian Pereira Lorenzi
    • Victor Velho de Castro
    • Celia de Fraga Malfatti

    ORIGINAL ARTICLE 04 October 2023 Pages: 1601 - 1612

    

40. An initial survey on the readiness of Industry 4.0 adoption in the manufacturing industries

    • Dheeraj Nimawat
    • Bhagwan Das Gidwani

    Original Article 04 October 2023 Pages: 1613 - 1630

    

41. Finite element analysis of additive manufacturing of polymers using selective laser sintering

    • Benjamin Sanderson
    • Fereydoon Diba
    • Ali Hosseini

    ORIGINAL ARTICLE 04 October 2023 Pages: 1631 - 1647

    

42. Mathematical modeling and experimental evaluation of superalloy EDM using cryogenically treated electrodes and transformer oil-based dielectrics: a correlation study

    • Kashif Ishfaq
    • Muhammad Sana
    • Saqib Anwar

    ORIGINAL ARTICLE 04 October 2023 Pages: 1649 - 1663

    

43. Laser-induced alloy nanoparticles: Au–Sn thin film morphology influence on the dewetting process

    • Paulina Dzienny
    • Tomasz Rerek
    • Arkadiusz Antończak

    ORIGINAL ARTICLE Open access 04 October 2023 Pages: 1665 - 1676

    

44. Processability approach for laser powder bed fusion of metallic alloys

    • Homero Alberto Castro-Espinosa
    • Leopoldo Ruiz-Huerta

    ORIGINAL ARTICLE Open access 04 October 2023 Pages: 1677 - 1687

    

45. Performance assessment of nano-Al₂O₃ enriched coconut oil as a cutting fluid in MQL-assisted machining of AISI-1040 steel

    • Saurabh Tiwari
    • M Amarnath
    • Mayur A. Makhesana

    ORIGINAL ARTICLE 04 October 2023 Pages: 1689 - 1702

    

46. Novel use of cryogenic cooling conditions in improving the machining performance of Al 8011/nano-SiC composites

    • Nimel Sworna Ross
    • Belsam Jeba Ananth Manasea Selvin
    • Mehmet Erdi Korkmaz

    Original Article Open access 04 October 2023 Pages: 1703 - 1715

    

47. Study on fluid flow characteristics and laser transmission mode of water jet–guided laser processing in blind hole

    • Jinsheng Liang
    • Hongchao Qiao
    • Shunshan Wang

    ORIGINAL ARTICLE 05 October 2023 Pages: 1717 - 1730

    

48. Investigation of work coordinate system setting in ultra-precision machining using electrical breakdown for non-conductive materials

    • Zach Lowery
    • Sangjin Maeng
    • Sangkee Min

    Original Article 05 October 2023 Pages: 1731 - 1740

    

49. Tool remaining useful life prediction and parameters optimization in milling 508III steel

    • Xiaoyu Gai
    • Yaonan Cheng
    • Jing Xue

    ORIGINAL ARTICLE 05 October 2023 Pages: 1741 - 1757

    

50. The impact of usage on the performance of lubricating emulsions in micro-forming

    • Úlfar Arinbjarnar
    • Sahand Rahemipoor
    • Chris V. Nielsen

    ORIGINAL ARTICLE Open access 06 October 2023 Pages: 1759 - 1767