1. Current research status and prospect of metal transfer process control methods in gas metal arc welding

   • Yazhou Jia
   • Ning Huang
   • Wenhao Huang

   Critical Review 11 August 2023 Pages: 2797 - 2811

   

2. Electrode manufacturing based on printing: a mini review

   • Hao Zheng
   • Zijing Guo
   • Zhihua Pu

   Critical Review 16 August 2023 Pages: 2813 - 2824

   

3. State of the art of automatic disassembly of WEEE and perspective towards intelligent recycling in the era of Industry 4.0

   • Yingqi Lu
   • Weidi Pei
   • Kaiyuan Peng

   Critical Review 17 August 2023 Pages: 2825 - 2843

   

4. Correction to: State of the art of automatic disassembly of WEEE and perspective towards intelligent recycling in the era of Industry 4.0

   • Yingqi Lu
   • Weidi Pei
   • Kaiyuan Peng

   Correction 24 August 2023 Pages: 2845 - 2845

5. LAM additive manufacturing: a fundamental review on mechanical properties, common defects, dominant processing variables, and its applications

   • Thabiso Hopewell Sibisi
   • Mxolisi Brendon Shongwe
   • Ipfi Mathoho

   Critical Review Open access 21 August 2023 Pages: 2847 - 2861

   

6. Effect of process parameters on mechanical properties of Inconel718 superalloy fabricated by directional energy deposition

   • Tianhao Jia
   • Bin Zou
   • Hongjian Ding

   ORIGINAL ARTICLE 24 January 2023 Pages: 2863 - 2883

   

7. Manufacturing industry based on dynamic soft sensors in integrated with feature representation and classification using fuzzy logic and deep learning architecture

   • Shakir Khan
   • Tamanna Siddiqui
   • Amani Alfaifi

   ORIGINAL ARTICLE 06 June 2023 Pages: 2885 - 2897

   

8. Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel

   • Abhinav Srivastava
   • Hrishikesh Das
   • Md. Reza-E-Rabby

   ORIGINAL ARTICLE 10 August 2023 Pages: 2899 - 2911

   

9. Correction to: Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel

   • Abhinav Srivastava
   • Hrishikesh Das
   • Md. Reza‑E‑Rabby

   Correction 26 August 2023 Pages: 2913 - 2913

10. Machining parameters and distortion analyses in end milling of AA2050 and AA7050

    • Elvan Ates
    • Zafer Evis
    • Fahrettin Ozturk

    ORIGINAL ARTICLE 11 August 2023 Pages: 2915 - 2929

    

11. A GND simulation model for micro-deformation mechanism analyses in high-speed cutting Inconel718

    • Yihang Fan
    • Bing Wang
    • Gangwei Cui

    ORIGINAL ARTICLE 11 August 2023 Pages: 2931 - 2952

    

12. Effect of powder particle size distribution and contouring on build quality in electron beam powder bed fusion of a medium-C hot-work tool steel

    • Ethan M. Sullivan
    • Saman Sharif Hedås
    • Greta Lindwall

    ORIGINAL ARTICLE Open access 11 August 2023 Pages: 2953 - 2967

    

13. Correction to: Effect of powder particle size distribution and contouring on build quality in electron beam powder bed fusion of a medium‑C hot‑work tool steel

    • Ethan M. Sullivan
    • Saman Sharif Hedås
    • Greta Lindwall

    Correction Open access 18 August 2023 Pages: 2969 - 2969

14. Improvement in tensile strength of Al/Cu dissimilar joints via submerged friction stir welding: revealing the action mechanism of water cooling on intermetallic compounds layer

    • Yue Mao
    • Run Wu
    • Li Fu

    ORIGINAL ARTICLE 11 August 2023 Pages: 2971 - 2982

    

15. Fabrication of alumina ceramics with high flexural strength using stereolithography

    • Haiman Xu
    • Shijia Li
    • Kejie Wang

    ORIGINAL ARTICLE 12 August 2023 Pages: 2983 - 2994

    

16. AI modeling for high-fidelity heat transfer and thermal distortion forecast in metal additive manufacturing

    • Amit Kumar Ball
    • Amrita Basak

    ORIGINAL ARTICLE 12 August 2023 Pages: 2995 - 3010

    

17. Effects of preheating and slow cooling stages in small-scale resistance spot welding of the Ti-2Al-1Mn alloy

    • Sergei Butsykin
    • Mikhail Slobodyan
    • Alexey Kiselev

    ORIGINAL ARTICLE 14 August 2023 Pages: 3011 - 3024

    

18. Nanosecond pulsed laser surface processing of AISI 301LN steel: effect on surface topography and mechanical properties

    • Mohammad Rezayat
    • Mahmoud Moradi
    • Antonio Mateo

    ORIGINAL ARTICLE 14 August 2023 Pages: 3025 - 3040

    

19. Development of tablet defect detection model using biaxial planes discrete scanning algorithm

    • Hsiung-Cheng Lin
    • Sheng-Xi Xiao

    ORIGINAL ARTICLE 14 August 2023 Pages: 3041 - 3056

    

20. Investigation of sustainability and performance of Ag-coated CuO cutting fluid in grinding of Inconel 738

    • Mohammad Bayat
    • Hamed Adibi
    • Amin Barzegar

    ORIGINAL ARTICLE 14 August 2023 Pages: 3057 - 3075

    

21. Structural behavior of the deep hole internal grinding machine structure with artificial granite material

    • Muhammad Jawad Ahmad
    • Xianglong Zhu
    • Hafiz Abdul Saboor

    Original Article 14 August 2023 Pages: 3077 - 3091

    

22. Variability in mechanical properties of additively manufactured 17-4 PH stainless steel produced by multiple vendors: insights for qualification

    • Denise Yin
    • Edwin B. Gienger
    • Michael Presley

    Original Article 15 August 2023 Pages: 3093 - 3103

    

23. Experimental investigation of cutting performance for circular saw blade body modification by resin layers toward green manufacturing

    • Jinyou Kang
    • Jinsheng Zhang
    • Weiye Song

    ORIGINAL ARTICLE 15 August 2023 Pages: 3105 - 3121

    

24. Effect of defocus amount of nanosecond laser line spot on the laser ablation characteristics of nickel-based superalloys

    • Chengnuo Yi
    • Xiaoxiao Chen
    • Wenwu Zhang

    ORIGINAL ARTICLE 16 August 2023 Pages: 3123 - 3132

    

25. A study on quartz wafer slot polishing by using the ultrasonic-assisted wire electrophoretic deposition method

    • Chun-Hao Yang
    • Hai-Ping Tsui

    ORIGINAL ARTICLE 16 August 2023 Pages: 3133 - 3148

    

26. Investigation of the stray corrosion of Inconel 718 at low current density in NaNO₃ solution

    • Jianwei Guo
    • Dong Zhu
    • Zhenhao Hou

    ORIGINAL ARTICLE 16 August 2023 Pages: 3149 - 3159

    

27. Development of a novel direct powder screw extruder for 3D scaffold printing of PCL-based composites

    • Trung Kien Nguyen
    • Bang Thi Le
    • Lan Xuan Phung

    ORIGINAL ARTICLE 16 August 2023 Pages: 3161 - 3182

    

28. Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material

    • Madani Grine
    • Mohamed Slamani
    • Jean-François Chatelain

    ORIGINAL ARTICLE 16 August 2023 Pages: 3183 - 3196

    

29. In situ monitoring for numerical controlled manufacturing of large conceptual prototype based on multi-view stitching fusion

    • Jinghua Xu
    • Linxuan Wang
    • Jianrong Tan

    ORIGINAL ARTICLE 16 August 2023 Pages: 3197 - 3214

    

30. Effective feed rate control to maintain constant feed per tooth along toolpaths for milling complex–shaped parts

    • Petr Vavruska
    • Filip Bartos
    • Matej Pesice

    Original Article 17 August 2023 Pages: 3215 - 3232

    

31. Study on electrochemical machining of involute internal spline of Cr-Co-Mo-Ni high-hardness gear steel

    • Jingshan Huang
    • Bin Yao
    • Lin Jin

    ORIGINAL ARTICLE 17 August 2023 Pages: 3233 - 3249

    

32. Investigation on focused ultrasound-assisted diamond wire sawing of silicon carbide

    • Lutao Yan
    • Xiuhong Chen
    • Qinjian Zhang

    Original Article 17 August 2023 Pages: 3251 - 3259

    

33. Unconventional wear characteristics due to perfect plasticity in laser powder bed fusion processed 316 L stainless steel

    • Ismat Ara
    • Xiangqing Annie Tangpong
    • Fardad Azarmi

    Original Article 18 August 2023 Pages: 3261 - 3272

    

34. Intergranular corrosion and mechanical property evolution in AA2024 alloy through heat treatment

    • Fatima Ezzohra El Garchani
    • Moulay Rachid Kabiri

    ORIGINAL ARTICLE 18 August 2023 Pages: 3273 - 3282

    

35. A new passive vision weld seam tracking method for FSW based on K-means

    • Liu Yang
    • Jinchun Deng
    • Jun Shen

    Original Article 18 August 2023 Pages: 3283 - 3295

    

36. A two-module automated scanning inspection planning methodology for hole features on image measuring instrument

    • Guangshuai Liu
    • Yuzhou Yang
    • Wenyu Yi

    ORIGINAL ARTICLE 18 August 2023 Pages: 3297 - 3316

    

37. Residual stress and strain mitigation in direct laser deposition through adjustment buildup geometry or addition of ductile transition layer

    • Sergei Ivanov
    • Gleb Turichin

    ORIGINAL ARTICLE 18 August 2023 Pages: 3317 - 3329

    

38. Design and thermal characteristic analysis of motorized spindle cooling water jacket

    • Zhaolong Li
    • Baodong Wang
    • Qinghai Wang

    ORIGINAL ARTICLE 18 August 2023 Pages: 3331 - 3342

    

39. Experimental investigation and optimization on trepanning drilling in K24 superalloy by femtosecond laser via orthogonal experiment

    • Jianlin Sun
    • Dawei Zhang
    • Huilai Sun

    Original Article 18 August 2023 Pages: 3343 - 3356

    

40. Monitoring the misalignment of machine tools with autoencoders after they are trained with transfer learning data

    • Mustafa Demetgul
    • Qi Zheng
    • Jürgen Fleischer

    ORIGINAL ARTICLE Open access 19 August 2023 Pages: 3357 - 3373

    

41. Pareto optimal solution set strategy based on multiobjective optimization for the clinching tools

    • Fan Xu
    • Ming Gao
    • Zhen Zhang

    ORIGINAL ARTICLE 19 August 2023 Pages: 3375 - 3389

    

42. Experimental investigation on the factors affecting the quality of titanium alloy overhang via selective laser melting forming

    • Chunjian Su
    • Jiazhen Cao
    • Wei Min Huang

    ORIGINAL ARTICLE 19 August 2023 Pages: 3391 - 3402

    

43. Novel cross wedge rolling method for producing railcar axles

    • Zbigniew Pater
    • Janusz Tomczak
    • Tomasz Bulzak

    ORIGINAL ARTICLE Open access 19 August 2023 Pages: 3403 - 3413

    

44. Detection and characterization of metal transfer in GMAW using computational vision algorithms

    • Jorge Luis Ortiz Solano
    • Andrés Mauricio Moreno-Uribe
    • Régis Henrique Gonçalves e Silva

    ORIGINAL ARTICLE 19 August 2023 Pages: 3415 - 3425

    

45. Crystal plasticity–based finite element modeling and experimental study for high strain rate microscale laser shock clinching of copper foil

    • Yaxuan Hou
    • Jianfeng Wang
    • Cunsheng Zhang

    ORIGINAL ARTICLE 19 August 2023 Pages: 3427 - 3439

    

46. Design, fabrication, and evaluation of a small turbine blade manufactured by rotational molding

    • Michaël Pereira
    • Nader Zirak
    • Abbas Tcharkhtchi

    ORIGINAL ARTICLE 21 August 2023 Pages: 3441 - 3450

    

47. An extended laser beam heating model for a numerical platform to simulate multi-material selective laser melting

    • Svyetlichnyy Dmytro
    • Bajda Szymon
    • Krzyzanowski Michal

    ORIGINAL ARTICLE Open access 21 August 2023 Pages: 3451 - 3470

    

48. Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG

    • Rajan Kumaresan
    • Mahendran Samykano
    • Md. Mustafizur Rahman

    Original Article 21 August 2023 Pages: 3471 - 3489

    

49. Dissimilar friction stir butt welding of AA7075-T6 Al and Ti6Al4V Ti plates: Mechanical and metallurgical analysis

    • Mustafa Ugurlu
    • Ahmet Cakan

    ORIGINAL ARTICLE 21 August 2023 Pages: 3491 - 3506

    

50. A synergistic impact of LPBF process parameters on attaining a defect-free Cu-Cr-Zr alloy parts: an analytical and experimental study

    • Saravana Kumar Murugesan
    • Jeyaprakash Natarajan
    • Kavimani Vijayananth

    ORIGINAL ARTICLE 22 August 2023 Pages: 3507 - 3529