1. Correspondence measure: a review for the digital twin standardization

   • Tarique Hasan Khan
   • Chiho Noh
   • Soonhung Han

   Critical Review 01 August 2023 Pages: 1907 - 1927

   

2. On the potential of low-cost instrumentation for digitalization of legacy machine tools

   • Paulo de Tarso Durigan
   • Sidney Bruce Shiki
   • Armando Ítalo Sette Antonialli

   ORIGINAL ARTICLE 31 July 2023 Pages: 1929 - 1941

   

3. Friction stir welding of aluminum to titanium: quest for optimum tool-offset, deformation of titanium, and mechanism of joint formation

   • Amlan Kar
   • Satish V. Kailas
   • Satyam Suwas

   ORIGINAL ARTICLE 31 July 2023 Pages: 1943 - 1956

   

4. Improving surface and dimensional quality with an additive manufacturing-based hybrid technique

   • İsmail Ata Mertkan
   • Tuğçe Tezel
   • Volkan Kovan

   Original Article 31 July 2023 Pages: 1957 - 1963

   

5. Analysis of manufacturing and material parameters in 3D-printed polylactic acid (PLA) parts filled with glass powder: mechanical, economic, and environmental assessment

   • Laura Castanon-Jano
   • Paula Palomera-Obregon
   • Irune Indacoechea-Vega

   ORIGINAL ARTICLE Open access 31 July 2023 Pages: 1965 - 1979

   

6. X-ray observation study of the influence of binder deposition on sintering process of aluminum binder jetting

   • Daichi Yamaguchi
   • Naoki Oya

   ORIGINAL ARTICLE 01 August 2023 Pages: 1981 - 1990

   

7. Evaluation of milling performance of 50-μm D-shaped carbide tool, polycrystalline diamond-coated carbide tool, and polycrystalline diamond tool

   • Jin Xin Jiang
   • Chen Jiang
   • Yu Hao

   ORIGINAL ARTICLE 01 August 2023 Pages: 1991 - 2000

   

8. On-line evolutionary identification technology for milling chatter of thin walled parts based on the incremental-sparse K-means and the online sequential extreme learning machine

   • Zhixue Wang
   • Caixu Yue
   • Liying Yong

   ORIGINAL ARTICLE 01 August 2023 Pages: 2001 - 2011

   

9. Development of automatic orbital pipe MIG welding system and process parameters’ optimization of AISI 1020 mild steel pipe using hybrid artificial neural network and genetic algorithm

   • Amanuel Kassa Mengistie
   • Teshome Mulatie Bogale

   ORIGINAL ARTICLE 01 August 2023 Pages: 2013 - 2028

   

10. Optimized design of indexable insert drill based on radial cutting force balance

    • Aisheng Jiang
    • Zhanqiang Liu
    • Jinfu Zhao

    ORIGINAL ARTICLE 01 August 2023 Pages: 2029 - 2041

    

11. Redefining Human–Robot Symbiosis: a bio-inspired approach to collaborative assembly

    • Federico Barravecchia
    • Mirco Bartolomei
    • Fiorenzo Franceschini

    ORIGINAL ARTICLE Open access 01 August 2023 Pages: 2043 - 2058

    

12. Investigating the impact of yield criteria and process parameters on fracture height of cylindrical cups in the deep drawing process of SPCC sheet steel

    • The-Thanh Luyen
    • Thi-Bich Mac
    • Duc-Toan Nguyen

    ORIGINAL ARTICLE 01 August 2023 Pages: 2059 - 2073

    

13. Determination method of stable grasping parameters for irregular sheet sorting

    • Sen Zhang
    • Yansong Zhang

    ORIGINAL ARTICLE 02 August 2023 Pages: 2075 - 2085

    

14. Improving surface integrity by optimizing slide diamond burnishing parameters after hard turning of 42CrMo4 steel

    • Jawad Zaghal
    • Viktor Molnár
    • Márton Benke

    ORIGINAL ARTICLE Open access 02 August 2023 Pages: 2087 - 2103

    

15. The effect of the diode laser beam power on the behaviour of the ZrC powder pre-coat and the 145Cr6 steel substrate during laser processing

    • Dariusz Bartkowski
    • Aneta Bartkowska
    • Dariusz Ulbrich

    ORIGINAL ARTICLE Open access 02 August 2023 Pages: 2105 - 2121

    

16. Improvement of fatigue performance by applying tandem GMAW in lap joints with gaps

    • Dong-Yoon Kim
    • Gwang-Gook Kim
    • Junhong Park

    ORIGINAL ARTICLE 02 August 2023 Pages: 2123 - 2135

    

17. Shape-property synergistic control in closed die forging of large-diameter copper alloy valve body

    • Yin Jing
    • Wu Haibao
    • Shu Xuedao

    ORIGINAL ARTICLE 08 July 2023 Pages: 2137 - 2146

    

18. Decision tree predictive model for dimensional control of side flange bearing housings

    • Rafael G. Soares
    • Gabriella C. B. C. Dalpra
    • Alisson M. Silva

    ORIGINAL ARTICLE 03 August 2023 Pages: 2147 - 2159

    

19. Susceptibility of adiabatic shear band formation in AZ31B magnesium alloy during high strain rate impact

    • Francis Tetteh
    • Solomon Hanson Duntu
    • Solomon Boakye-Yiadom

    ORIGINAL ARTICLE 03 August 2023 Pages: 2161 - 2174

    

20. Aluminium deep drawing with additive manufacturing polymer punches: analysis of performance in small batch production

    • Luca Giorleo
    • Elisabetta Ceretti

    ORIGINAL ARTICLE Open access 03 August 2023 Pages: 2175 - 2185

    

21. Research on surface integrity of Inconel 718 with various ultrasonic ball-end milling times

    • Xiaoming Yin
    • Shenliang Yang
    • Deyuan Zhang

    ORIGINAL ARTICLE 03 August 2023 Pages: 2187 - 2197

    

22. Study on the removal mechanism in multi-abrasive micro-grinding of nickel-based superalloy

    • Minghui Chen
    • Ming Cai
    • Yu Liu

    ORIGINAL ARTICLE 03 August 2023 Pages: 2199 - 2220

    

23. Effect of layer-by-layer laser remelting process on the microstructure and performance of selective laser melting 316L stainless steel

    • Xuehui Chen
    • Kai Wen
    • Wei Liu

    Original Aeticle 04 August 2023 Pages: 2221 - 2236

    

24. A novel method to minimize the five-axis CNC machining error around singular points based on closed-loop inverse kinematics

    • Zehong Lu
    • Guanying Huo
    • Xin Jiang

    ORIGINAL ARTICLE 04 August 2023 Pages: 2237 - 2249

    

25. Numerical simulation optimization of a magnetic system structure for magnetic field hybrid wire-arc DED

    • Yiwen Li
    • Junyan Miao
    • Yunlong Chang

    ORIGINAL ARTICLE 04 August 2023 Pages: 2251 - 2260

    

26. Milling performance of cryogenic cooled titanium alloy thin-walled parts based on cantilever sheet

    • Fengbiao Wang
    • Yongqing Wang

    ORIGINAL ARTICLE 04 August 2023 Pages: 2261 - 2270

    

27. Experiments and analysis for accurate controlling of an ultra-microvolume adhesive droplet in dispensing

    • Huifang Liu
    • Dingrui Zhao
    • An Li

    ORIGINAL ARTICLE 04 August 2023 Pages: 2271 - 2283

    

28. Numerical analysis of face sheet/core debonding failure in the plastic forming of aluminum foam sandwich panel

    • Xi Zhang
    • Zhong-yi Cai
    • Ming-wei Wang

    ORIGINAL ARTICLE 05 August 2023 Pages: 2285 - 2300

    

29. Detailed characterisation of batch-manufactured flexible micro-grinding tools for electrochemical assisted grinding of copper surfaces

    • Lukas Steinhoff
    • Rico Ottermann
    • Marc Christopher Wurz

    ORIGINAL ARTICLE Open access 05 August 2023 Pages: 2301 - 2310

    

30. Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications

    • Frédéric Bédard
    • Abdelhalim Loucif
    • Victor Songmene

    ORIGINAL ARTICLE 05 August 2023 Pages: 2311 - 2317

    

31. Modeling and simulation of material removal characteristics in magnetorheological shear thickening polishing

    • Zhen Ma
    • Yebing Tian
    • Zhiguang Sun

    ORIGINAL ARTICLE 05 August 2023 Pages: 2319 - 2331

    

32. Low-cost manufacturing of high-precision personalized flexures by a hybrid 3D printing-electroforming technique

    • Sayedmohammadali Aghili
    • Zhaohan Zheng
    • Rolf Wüthrich

    ORIGINAL ARTICLE 05 August 2023 Pages: 2333 - 2346

    

33. Investigation on deformation characteristic of electromagnetic punching process in AA5182 aluminum alloy sheet

    • Liming Duan
    • Zhibo Hong
    • Hao Jiang

    ORIGINAL ARTICLE 05 August 2023 Pages: 2347 - 2363

    

34. Optimization of removal process parameters of polyvinyl butyral cooling channel in rapid silicone rubber molds using the Taguchi method

    • Chil-Chyuan Kuo
    • Jun-Guo Peng
    • Song-Hua Hunag

    ORIGINAL ARTICLE 05 August 2023 Pages: 2365 - 2376

    

35. Fatigue analysis of additively manufactured short carbon fiber-reinforced PETG Components

    • Mithila Rajeshirke
    • Suhas Alkunte
    • Ismail Fidan

    ORIGINAL ARTICLE 07 August 2023 Pages: 2377 - 2394

    

36. Pre-deformation effect on the hot deformation behavior and microstructure of AA6011 tube: experimentation and modelling

    • Zhennan Bao
    • Shuguang Qu
    • Zhubin He

    ORIGINAL ARTICLE 07 August 2023 Pages: 2395 - 2406

    

37. Effect of interference and form defect on the cohesion of the shrink-fit assembly

    • Allal Bedlaoui
    • Hamid Boutoutaou

    ORIGINAL ARTICLE 07 August 2023 Pages: 2407 - 2418

    

38. New STEP-NC-compliant system to automate process planning for the turning process

    • Abdelilah Elmesbahi
    • Irene Buj-Corral
    • Oussama Bensaid

    ORIGINAL ARTICLE 07 August 2023 Pages: 2419 - 2457

    

39. A novel synchronous scanning strategy in laser powder bed fusion and effect on mechanical properties of industrial gears

    • Cemal İrfan Çalışkan

    Original Article 07 August 2023 Pages: 2459 - 2467

    

40. Modified shaving die for shaving thick sheet metal

    • Arkarapon Sontamino
    • Sutasn Thipprakmas

    ORIGINAL ARTICLE 08 August 2023 Pages: 2469 - 2481

    

41. A multi-objective modeling and optimization method for high efficiency, low energy, and economy

    • Wenxiang Jiang
    • Lishu Lv
    • Wenhui Yue

    ORIGINAL ARTICLE 08 August 2023 Pages: 2483 - 2498

    

42. NSGA-III-based multi-objective approach for reconfigurable manufacturing system design considering single-spindle and multi-spindle modular reconfigurable machines

    • Muhammad Ameer
    • Mohammed Dahane

    ORIGINAL ARTICLE 08 August 2023 Pages: 2499 - 2524

    

43. Assessing thermal properties of multipass weld beads using active thermography: microstructural variations and anisotropy analysis

    • Raffaella Sesana
    • Luca Santoro
    • Piergiorgio Pagano

    ORIGINAL ARTICLE Open access 08 August 2023 Pages: 2525 - 2536

    

44. Finite element modeling and simulation of vacuum brazing processes with a focus on cycle-dependent component distortion

    • Wolfgang Tillmann
    • Tim Henning
    • Finn Ontrup

    ORIGINAL ARTICLE Open access 08 August 2023 Pages: 2537 - 2550

    

45. Characterization of cold metal transfer and conventional short-circuit gas metal arc welding processes for depositing tungsten carbide-reinforced metal matrix composite overlays

    • Mohammad Reza Karimi
    • Sheng-Hui Wang
    • Jasmin Jelovica

    ORIGINAL ARTICLE Open access 09 August 2023 Pages: 2551 - 2570

    

46. A monocular-based tracking framework for industrial augmented reality applications

    • Xu Yang
    • Junqi Cai
    • Hengling Cao

    ORIGINAL ARTICLE 09 August 2023 Pages: 2571 - 2588

    

47. Friction welding parameter for AA6063 using ANFIS prediction

    • Siridech Kunhirunbawon
    • Narisara Suwichien
    • Tanakorn Jantarasricha

    ORIGINAL ARTICLE 09 August 2023 Pages: 2589 - 2597

    

48. A thermal error modeling method for CNC lathes based on thermal distortion decoupling and nonlinear programming

    • Hongyang Du
    • Gedong Jiang
    • Xuesong Mei

    ORIGINAL ARTICLE 09 August 2023 Pages: 2599 - 2612

    

49. Tribological and machining characteristics of milling SiCp/Al MMC composites under sustainable cooling conditions

    • Rashid Ali Laghari
    • Ning He
    • Munish Kumar Gupta

    ORIGINAL ARTICLE 09 August 2023 Pages: 2613 - 2630

    

50. The spindle axial time-varying thermal error compensation method for horizontal boring and milling machine tool based on edge computing

    • Lei Song
    • Kuo Liu
    • Yongqing Wang

    ORIGINAL ARTICLE 09 August 2023 Pages: 2631 - 2638