1. A review of digital twin intelligent assembly technology and application for complex mechanical products

   • Chen Tao
   • Li Chunhui
   • Wang Guangyue

   Critical Review 26 June 2023 Pages: 4013 - 4033

   

2. Advances in magnetic field-assisted ECM—from magnetoelectric effects to technology applications

   • Liangliang Li
   • Baoji Ma
   • Xiangyu Li

   Critical Review 29 June 2023 Pages: 4035 - 4065

   

3. A hybrid approach for reliability allocation of NC machine tool based on meta-action

   • Wei Zhang
   • Yanbin Du
   • Qi Zhu

   ORIGINAL ARTICLE 10 June 2023 Pages: 4067 - 4079

   

4. Synthesis and characterization of diamond-like carbon coatings for drill bits using plasma-enhanced chemical vapor deposition

   • Vijaykumar S. Jatti
   • Eyob Messele Sefene
   • Rahul D. Dhabale

   ORIGINAL ARTICLE 22 June 2023 Pages: 4081 - 4096

   

5. The influence of pH and H₂O₂ on surface quality and material removal rate during W-CMP

   • Lin Wang
   • Feng Peng
   • Julong Yuan

   ORIGINAL ARTICLE 23 June 2023 Pages: 4097 - 4110

   

6. Optimizing 3D printing facility selection for ubiquitous manufacturing using an evolving fuzzy big data analytics approach

   • Tin-Chih Toly Chen
   • Chi-Wei Lin
   • Min-Chi Chiu

   ORIGINAL ARTICLE 23 June 2023 Pages: 4111 - 4121

   

7. Comparative study of corrosion susceptibility and microstructural effects on AA7075-T6 aluminum alloys under different heat treatments

   • Fatima Ezzohra El Garchani
   • Moulay Rachid Kabiri

   ORIGINAL ARTICLE 23 June 2023 Pages: 4123 - 4132

   

8. Design and application of laser scanning strategy for machining deep surface grooves with a continuous-wave fiber laser

   • Si Qing Liu
   • Sang Wook Han
   • Young Hoon Moon

   ORIGINAL ARTICLE 23 June 2023 Pages: 4133 - 4147

   

9. Investigation of die designs on welding quality and billet material utilisation for multi-container extrusion of wide stiffened aluminium panels

   • Zhe Zhang
   • Wenbin Zhou
   • Jianguo Lin

   ORIGINAL ARTICLE Open access 23 June 2023 Pages: 4149 - 4162

   

10. Based on wavelet-Lipschitz function for node detection method on armor subsequent damage optimization

    • Hanjui Chang
    • Yue Sun
    • Guangyi Zhang

    ORIGINAL ARTICLE 23 June 2023 Pages: 4163 - 4180

    

11. Motion profile optimization of servo press in deep drawing process of SUS 304 stainless steel sheets

    • Bor-Tsuen Lin
    • Kuo-Wang Liu
    • Chun-Chih Kuo

    ORIGINAL ARTICLE 23 June 2023 Pages: 4181 - 4198

    

12. Finite element simulation of residual stress in milling of aluminum alloy with different passes

    • Yongshi Xu
    • Caixu Yue
    • Xianli Liu

    ORIGINAL ARTICLE 23 June 2023 Pages: 4199 - 4210

    

13. Effect of heat treatments on microstructure and mechanical properties of AlSi10Mg alloys fabricated by laser powder bed fusion

    • Xiaogang Zhu
    • Dafan Du
    • Zhendong Chen

    ORIGINAL ARTICLE 24 June 2023 Pages: 4211 - 4223

    

14. Research on wear state identification and life prediction technology of ultrasonic straight-edge knife

    • Huawei Ji
    • Fan Yang
    • Jing Ni

    ORIGINAL ARTICLE 24 June 2023 Pages: 4225 - 4235

    

15. Additively manufactured cure tools for composites manufacture

    • Max D. A. Valentine
    • Arjun Radhakrishnan
    • Vimal Dhokia

    ORIGINAL ARTICLE Open access 24 June 2023 Pages: 4237 - 4251

    

16. Analytical modeling of milling residual stress under different tool wear conditions

    • Junhui Lu
    • Caixu Yue
    • Steven Y. Liang

    ORIGINAL ARTICLE 24 June 2023 Pages: 4253 - 4269

    

17. Optimization of drilling process parameters of sisal/cork-reinforced epoxy biosandwich structure by multi-objective RSM and hybrid ANN-GA models

    • Ahmed Belaadi
    • Messaouda Boumaaza
    • Mostefa Bourchak

    ORIGINAL ARTICLE 24 June 2023 Pages: 4271 - 4289

    

18. Theoretical aspects and design of a numerical model for friction tapered hydro-pillar processing of AISI4140 steel

    • Carlo van Zyl
    • Hannalie Lombard
    • Danie Hattingh

    ORIGINAL ARTICLE 24 June 2023 Pages: 4291 - 4306

    

19. HRC of intelligent assembly system based on multimodal gesture control

    • Jianguo Duan
    • Yuan Fang
    • Jiyun Qin

    ORIGINAL ARTICLE 24 June 2023 Pages: 4307 - 4319

    

20. Flexible conductive patterns using electrohydrodynamic jet printing method based on high-voltage electrostatic focusing lens

    • Jun Chen
    • Ting Wu
    • Xiangying Yan

    ORIGINAL ARTICLE 26 June 2023 Pages: 4321 - 4329

    

21. Influence of edge thermal spraying on the temperature field and thermal crown of work roll during cold rolling of aluminum alloy strip

    • Xiuliang Wang
    • Weidong Zhang
    • Yibo Ai

    ORIGINAL ARTICLE 26 June 2023 Pages: 4331 - 4338

    

22. A novel geometric error compensation method for improving machining accuracy of spiral bevel gear based on inverse kinematic model

    • Peng Chen
    • Sanmin Wang
    • Fei Li

    ORIGINAL ARTICLE 26 June 2023 Pages: 4339 - 4355

    

23. Noninterference tool orientations and maximum taper angles of conical cutters in 4-axis milling of complex channel parts

    • Wenbo Zhang
    • Junxue Ren
    • Jinhua Zhou

    ORIGINAL ARTICLE 26 June 2023 Pages: 4357 - 4385

    

24. A digital twin-based machining motion simulation and visualization monitoring system for milling robot

    • Zhaoju Zhu
    • Zhimao Lin
    • Bingwei He

    ORIGINAL ARTICLE 26 June 2023 Pages: 4387 - 4399

    

25. Analysis of rolling force and layer thickness in bimetal clad rolling

    • Pingju Hao
    • Yuanming Liu
    • Zhenguo Wang

    ORIGINAL ARTICLE 26 June 2023 Pages: 4401 - 4411

    

26. Numerical and experimental study on axial hydroforging process of 5A03 aluminium alloy S-shaped bellows

    • Qingfeng Wang
    • Guannan Chu
    • Xiehan Liu

    ORIGINAL ARTICLE 26 June 2023 Pages: 4413 - 4428

    

27. Analytical modeling of workpiece temperature in laser-assisted milling considering the combined effect of multi-heat sources

    • Haohao Zeng
    • Yan Zheng
    • Dong Yang

    ORIGINAL ARTICLE 26 June 2023 Pages: 4429 - 4437

    

28. Modeling of tow-to-spot diameter ratio for laser cutting of single-layer carbon fiber–reinforced plastics (CFRP)

    • Yonghao Luo
    • Xiaowu Zhu
    • Xingchen Yan

    ORIGINAL ARTICLE 26 June 2023 Pages: 4439 - 4452

    

29. Effect of T6I4 and T616 on the machinability of 7075 aluminum alloy and tool wear mechanism

    • Ping Zhang
    • Yeran Gao
    • Xiujie Yue

    ORIGINAL ARTICLE 27 June 2023 Pages: 4453 - 4471

    

30. Free-floating dynamic material removal mechanism of the honing process

    • Xin Zhang
    • Xueping Zhang

    ORIGINAL ARTICLE 27 June 2023 Pages: 4473 - 4489

    

31. Online identification of milling forces using acceleration signals

    • Qi Li
    • Maxiao Hou
    • Hongrui Cao

    ORIGINAL ARTICLE 27 June 2023 Pages: 4491 - 4501

    

32. Numerical simulation research on UDF flexible roll forming of multi-specification thin-walled circular tubes

    • Jianguo Cao
    • Xuesong Wang
    • Rongguo Zhao

    ORIGINAL ARTICLE 27 June 2023 Pages: 4503 - 4517

    

33. Preparation and performance of grinding wheel with orderly arranged abrasive particles based on laser processing technology

    • Kangwei Li
    • Mingjun Zhang
    • Yongle Hu

    ORIGINAL ARTICLE 28 June 2023 Pages: 4519 - 4532

    

34. Preparation and milling performance of boron-doped diamond composite coating cutters

    • Daohui Xiang
    • Zhipeng Zhang
    • Bo Zhao

    ORIGINAL ARTICLE 28 June 2023 Pages: 4533 - 4541

    

35. Parametric Analysis of Direct Energy Deposited 316 L-Si powder on 316 L Parts

    • Baris Telmen
    • Fabien Szmytka
    • Gilles Rolland

    ORIGINAL ARTICLE 28 June 2023 Pages: 4543 - 4562

    

36. Development of a longitudinal-torsional ultrasonic-assisted roller dressing device for precision form grinding of GCr15 bearing rings

    • Chenglong Li
    • Feng Jiao
    • Jinglin Tong

    ORIGINAL ARTICLE 28 June 2023 Pages: 4563 - 4576

    

37. Precisely tuning the residual stress anisotropy in machine hammer peening

    • Qi Liu
    • Siyu Jin
    • Bin Shen

    ORIGINAL ARTICLE 28 June 2023 Pages: 4577 - 4589

    

38. Study on the unstable crack propagation mechanism in turning machinable ceramics based on the energy conversion principle and the fracture mechanics theory

    • Jing Jia
    • Lianjie Ma
    • Yunguang Zhou

    ORIGINAL ARTICLE 28 June 2023 Pages: 4591 - 4606

    

39. A research on an inspection method of helix angle for helical gears using fringe projection profilometry

    • Song-Hyok Ri
    • Hyon Ri
    • Un-Bom Min

    ORIGINAL ARTICLE 28 June 2023 Pages: 4607 - 4618

    

40. Generative design of space frames for additive manufacturing technology

    • Marcus Watson
    • Martin Leary
    • Milan Brandt

    ORIGINAL ARTICLE Open access 28 June 2023 Pages: 4619 - 4639

    

41. Theoretical and experimental study on influencing factors of rabbit ear in the gear forced throughfeed rolling process

    • Ziyong Ma
    • Yinghu Tian
    • Yuanxin Luo

    ORIGINAL ARTICLE 29 June 2023 Pages: 4641 - 4658

    

42. Development and application of parametric design system for solid end mills based on Open CASCADE

    • Zhi Lin
    • Caixu Yue
    • Qianyi Zhang

    ORIGINAL ARTICLE 29 June 2023 Pages: 4659 - 4676

    

43. Numerical assessment of interstand tensions in continuous hot rolling processes of flat and long products

    • Christian Overhagen

    ORIGINAL ARTICLE Open access 29 June 2023 Pages: 4677 - 4696

    

44. Research on the sustainable measurement of machined surface roughness under the influence of cutting environment

    • Wei Chen
    • Bin Zou
    • Jikai Liu

    ORIGINAL ARTICLE 29 June 2023 Pages: 4697 - 4711

    

45. Numerical and experimental investigation of the effect of cold extrusion process on residual stress and fatigue life of internal thread of high-strength steel

    • Nian Wan
    • Qiang He
    • Honggen Zhou

    ORIGINAL ARTICLE 30 June 2023 Pages: 4713 - 4726

    

46. Global-to-local simulation of the thermal history in the laser powder bed fusion process based on a multiscale finite element approach

    • Yves Bresson
    • Amèvi Tongne
    • Lionel Arnaud

    ORIGINAL ARTICLE 30 June 2023 Pages: 4727 - 4744

    

47. Comparisons of formation process and quality between two-layer and three-layer self-piercing riveted joints

    • Huan Zhao
    • Li Han
    • Yunpeng Liu

    ORIGINAL ARTICLE 30 June 2023 Pages: 4745 - 4767

    

48. Optimization of GMAW process parameters for weld overlay of Inconel 686 superalloy on low-carbon steel

    • Seyedmohammad Tabaie
    • Trevor Greene
    • Michael J. Benoit

    ORIGINAL ARTICLE 01 July 2023 Pages: 4769 - 4788

    

49. Material removal rate prediction and surface quality study for ultrasonic vibration polishing of monocrystalline silicon

    • Sheng Qu
    • Tao Yu
    • Ji Zhao

    ORIGINAL ARTICLE 01 July 2023 Pages: 4789 - 4802

    

50. Investigation on the micromachining mechanism of FeCoCrNiAl0.6 high-entropy alloy

    • Ping Zhang
    • Zhenyong Lin
    • Songting Zhang

    ORIGINAL ARTICLE 01 July 2023 Pages: 4803 - 4818