1. A comprehensive review of injection mold cooling by using conformal cooling channels and thermally enhanced molds

   • Samaneh Arman
   • Ismail Lazoglu

   Critical Review 03 June 2023 Pages: 2035 - 2106

   

2. Advance in the research of electric pulse-assisted cutting

   • Zhihua Shao
   • Guohe Li
   • Feng Wang

   Critical Review 03 June 2023 Pages: 2107 - 2123

   

3. Experimental modeling techniques in electrical discharge machining (EDM): A review

   • Mohammad Mainul Hasan
   • Tanveer Saleh
   • Mohamed Sultan Mohamed Ali

   Critical Review 06 June 2023 Pages: 2125 - 2150

   

4. Agent-based manufacturing — review and expert evaluation

   • Terrin Pulikottil
   • Luis A. Estrada-Jimenez
   • Jose Barata

   Critical Review Open access 06 June 2023 Pages: 2151 - 2180

   

5. Integrating X-reality and lean into end-of-life aircraft parts disassembly sequence planning: a critical review and research agenda

   • Yinong Yang
   • Samira Keivanpour
   • Daniel Imbeau

   Critical Review 06 June 2023 Pages: 2181 - 2210

   

6. Manufacturing and optimization of the mechanical properties (tensile strength, flexural strength, and impact energy) of a chicken feather/egg shell/kaolin hybrid reinforced epoxy composite using the Taguchi technique

   • Danjuma Saleh Yawas
   • Malachy Sumaila
   • Bassey Okon Samuel

   ORIGINAL ARTICLE 27 February 2023 Pages: 2211 - 2226

   

7. Correction to: Manufacturing and optimization of the mechanical properties (tensile strength, flexural strength, and impact energy) of a chicken feather/egg shell/kaolin hybrid reinforced epoxy composite using the Taguchi technique

   • Danjuma Saleh Yawas
   • Malachy Sumaila
   • Bassey Okon Samuel

   Correction 07 June 2023 Pages: 2227 - 2228

   

8. On the development of part-scale FEM modeling for laser powder bed fusion of AISI 316L stainless steel with experimental verification

   • Muhammad Arif Mahmood
   • Asif Ur Rehman
   • Marwan Khraisheh

   ORIGINAL ARTICLE 26 May 2023 Pages: 2229 - 2255

   

9. A thermal error prediction model of the motorized spindles based on ABHHO-LSSVM

   • Shuwen Sun
   • Yunfei Qiao
   • Yachao Bian

   ORIGINAL ARTICLE 30 May 2023 Pages: 2257 - 2271

   

10. Analysis of heat transfer enhancement due to helical static mixing elements inside cooling channels in machine tools

    • Denis Anders
    • Ulf Reinicke
    • Markus Baum

    ORIGINAL ARTICLE Open access 30 May 2023 Pages: 2273 - 2285

    

11. Influence of post-processing milling conditions on the machinability and residual stresses evolution of LPBF 18Ni300 maraging steel

    • Miguel Duro
    • Tiago Silva
    • Abílio de Jesus

    ORIGINAL ARTICLE Open access 03 June 2023 Pages: 2287 - 2297

    

12. Establishment and analysis of feasibility evaluation system and ultra-precision manufacturing technology for small aperture free-form surface optical element

    • Shijie Li
    • Yuetian Huang
    • Weiguo Liu

    ORIGINAL ARTICLE 03 June 2023 Pages: 2299 - 2308

    

13. On the improvement of castings quality in hybrid low-pressure sand-casting (LPSC) process in a fully integrated CAE environment

    • Ahmed Ktari
    • Mohamed El Mansori

    ORIGINAL ARTICLE 03 June 2023 Pages: 2309 - 2326

    

14. Initiation and growth of edge cracks after shear cutting of dual-phase steel

    • Mahdi Masoumi Khalilabad
    • Semih Perdahcıoğlu
    • Ton van den Boogaard

    ORIGINAL ARTICLE Open access 03 June 2023 Pages: 2327 - 2341

    

15. Metal matrix composite fabricated from electrospun PAN, EGNS/PAN nanofibers and AL 5049 alloy by using friction stir processing

    • Saleh S. Abdelhady
    • Rehab E. Elbadawi
    • Said H. Zoalfakar

    ORIGINAL ARTICLE Open access 03 June 2023 Pages: 2343 - 2355

    

16. A constitutive model for cracking prediction of steel/aluminum thin-walled tubes during plastic joining

    • Hangyu Wu
    • Haiyan Yu

    ORIGINAL ARTICLE 03 June 2023 Pages: 2357 - 2370

    

17. Effect of shell mold thickness and insulating wool pattern on internal porosity in investment casting of vortex flow meter

    • Han-Wei Tseng
    • Ting-YI Chen
    • Yiin-Kuen Fuh

    ORIGINAL ARTICLE 03 June 2023 Pages: 2371 - 2385

    

18. Experimental and simulation studies on explosive welding of AZ31B-Al 5052 alloys

    • Prabhat Kumar
    • Subrata Kumar Ghosh
    • John Deb Barma

    ORIGINAL ARTICLE 03 June 2023 Pages: 2387 - 2399

    

19. Optimization of hybrid friction stir welding of PMMA: 3D-printed parts and conventional sheets welding efficiency in single- and two-axis welding traces

    • Markos Petousis
    • Nikolaos Mountakis
    • Nectarios Vidakis

    ORIGINAL ARTICLE Open access 03 June 2023 Pages: 2401 - 2423

    

20. A blank design optimization method of near-net ring rolling for complex stepped-section profile ring

    • Rongwen Wu
    • Zhongyuan Sun
    • Jian Lan

    ORIGINAL ARTICLE 03 June 2023 Pages: 2425 - 2445

    

21. Study on the manufacturing process for enhancing the high-pressure capability of stainless steel common rails

    • Minye Cao
    • Chengliang Hu
    • Zhen Zhao

    ORIGINAL ARTICLE 03 June 2023 Pages: 2447 - 2463

    

22. Real-time compensation strategy for clamping force-induced error in face milling of mass-produced valve bodies

    • Guangyan Ge
    • Yukun Xiao
    • Zhengchun Du

    ORIGINAL ARTICLE 04 June 2023 Pages: 2465 - 2474

    

23. Electrochemical machining of additively manufactured γ-TiAl parts: post-processing technique to reduce surface roughness

    • Hasan Demirtas
    • Abdulkadir Cebi
    • Guray Akbulut

    ORIGINAL ARTICLE 04 June 2023 Pages: 2475 - 2485

    

24. Strength modeling of Al-alloy sheet self-piercing riveting considering different failure modes

    • Yahui Liu
    • Zhiwang Zhu
    • Jun Wang

    ORIGINAL ARTICLE 04 June 2023 Pages: 2487 - 2503

    

25. FEM-DEM coupling analysis on hexagonal convex ring 6063-T5 tube ultrasonic-assisted granular medium forming

    • Han Hu
    • Miaoyan Cao
    • Min Fu

    ORIGINAL ARTICLE 05 June 2023 Pages: 2505 - 2521

    

26. Influence of sawdust ash on the microstructural and physicomechanical properties of stir-cast Al6063/SDA matrix composite

    • Adekunle A. Adeleke
    • Peter P. Ikubanni
    • Jude A. Okolie

    ORIGINAL ARTICLE 05 June 2023 Pages: 2523 - 2536

    

27. Research on fuzzy impedance force control technology of robot-assisted abrasive cloth wheel polishing blade

    • Jia Liu
    • Jingjing Zhang
    • Xuhui Zhao

    ORIGINAL ARTICLE 05 June 2023 Pages: 2537 - 2551

    

28. Research on the improvement of flat-clinching jointed aluminum alloy by reshaping process

    • Xiao Ouyang
    • Huiyang Zhang
    • Chao Chen

    ORIGINAL ARTICLE 05 June 2023 Pages: 2553 - 2562

    

29. Castability of Cu-Al-Mn shape memory alloy in a rapid investment casting process: computational and experimental analysis

    • Carlos Eduardo da Silva Albuquerque
    • Estephanie Nobre Dantas Grassi
    • Carlos José De Araújo

    ORIGINAL ARTICLE 05 June 2023 Pages: 2563 - 2579

    

30. Effect of TiO₂ nanoparticle lubrication on precision forming

    • Dan Xie
    • Qiuyue Ouyang
    • Wujiao Xu

    ORIGINAL ARTICLE 05 June 2023 Pages: 2581 - 2594

    

31. Offline digital twin for simulation and assessment of product surface quality

    • Yassmin Seid Ahmed
    • Hoda ElMaraghy

    ORIGINAL ARTICLE 05 June 2023 Pages: 2595 - 2615

    

32. Stress–strain parameter prediction method for AWJ technology from surface topography

    • Jan Valíček
    • Marta Harničárová
    • Vladimír Šepelák

    ORIGINAL ARTICLE Open access 05 June 2023 Pages: 2617 - 2635

    

33. Vibration wear mechanism and its control method for large-pitch screw turning tool

    • Xiangfu Fu
    • Kangnan Li
    • Chenglong Wang

    ORIGINAL ARTICLE 05 June 2023 Pages: 2637 - 2654

    

34. Charpy absorbed energy in simulated heat-affected zone of laser-arc hybrid welded joints by high-strength steel for bridge structures

    • Gang Chen
    • Mikihito Hirohata
    • Koutarou Inose

    ORIGINAL ARTICLE Open access 05 June 2023 Pages: 2655 - 2669

    

35. Eliminating warping due to stamping by using pulsed radial magnetic force

    • Zhihao Du
    • Huan Yang
    • Xiaohui Cui

    ORIGINAL ARTICLE 06 June 2023 Pages: 2671 - 2685

    

36. Identifying main contamination factors of laser powder bed fusion oxidation-sensitive powders

    • Yves Bresson
    • Amèvi Tongne
    • Lionel Arnaud

    ORIGINAL ARTICLE 06 June 2023 Pages: 2687 - 2706

    

37. Numerical study of the minimum uncut chip thickness in micro-machining of Inconel 718 based on Johnson–Cook isothermal model

    • Gabriel de Paiva Silva
    • Déborah de Oliveira
    • Lucival Malcher

    ORIGINAL ARTICLE 07 June 2023 Pages: 2707 - 2721

    

38. Analysis and prediction of shrinkage cavity defects of a large stepped shaft in open-die composite extrusion based on machine learning

    • Menghan Wang
    • Menglong Du
    • ZhouTian Wang

    ORIGINAL ARTICLE 07 June 2023 Pages: 2723 - 2735

    

39. Study on the uniformity of microgrooves in through-mask electrochemical micromachining with moving cathode

    • Ke Zhai
    • Feng Zhou
    • Liqun Du

    ORIGINAL ARTICLE 07 June 2023 Pages: 2737 - 2744

    

40. Particles’ distribution enhancing in aluminum-based composites produced by upward friction stir processing

    • Catarina Vidal
    • Pedro M. Ferreira
    • Telmo G. Santos

    ORIGINAL ARTICLE Open access 07 June 2023 Pages: 2745 - 2757

    

41. Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors

    • Erick Luiz Vieira Ruas
    • Wenderson Nascimento Lopes
    • Pedro Oliveira Conceição Junior

    ORIGINAL ARTICLE 07 June 2023 Pages: 2759 - 2773

    

42. The effect of differential lubrication and counter punch on hydroforming of 5A02 thin-walled aluminum alloy Y-shaped tube

    • Jiajun Xu
    • Xuefeng Xu
    • Ju Zhang

    ORIGINAL ARTICLE 07 June 2023 Pages: 2775 - 2784

    

43. A material removal model considering the effect of anisotropy on the processing of laser metal deposition Ti-alloy

    • Qi Zhang
    • Ben Wang
    • Jiaxing Zhao

    ORIGINAL ARTICLE 08 June 2023 Pages: 2785 - 2797

    

44. Effect of heat treatment on the welded joint of X70 steel joined to duplex stainless steel by gas tungsten arc welding

    • Oualid Beziou
    • Ines Hamdi
    • Thierry Baudin

    ORIGINAL ARTICLE 08 June 2023 Pages: 2799 - 2814

    

45. A generic model for prediction of kerf cross-sectional profile in multipass abrasive waterjet milling at macroscopic scale by considering the jet flow dynamics

    • Deepu Kumar Thumbooru Nagaraja
    • Sivasrinivasu Devadula

    ORIGINAL ARTICLE 08 June 2023 Pages: 2815 - 2841

    

46. Use of bidirectional electrolyte flow to improve PECM uniformity

    • Zexi Zhang
    • Edward De Meter
    • Saurabh Basu

    ORIGINAL ARTICLE 08 June 2023 Pages: 2843 - 2859

    

47. Stability analysis of milling chatter in six-degree-of-freedom industrial robots

    • Yun Zhang
    • Tingting Zhou
    • Jinwei Qiao

    ORIGINAL ARTICLE 08 June 2023 Pages: 2861 - 2880

    

48. Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy

    • Wenquan Sun
    • Luzhen Chen
    • Qiang Yi

    ORIGINAL ARTICLE 08 June 2023 Pages: 2881 - 2892

    

49. Simulation of combined rolling-extrusion process for round section billets in closed box caliber

    • Denis Sergeevich Voroshilov
    • Sergey Borisovich Sidelnikov
    • Irina Nikolaevna Belokonova

    ORIGINAL ARTICLE 09 June 2023 Pages: 2893 - 2910

    

50. An empirical method for forecasting energy consumption in material extrusion

    • Mariangela Quarto

    ORIGINAL ARTICLE 09 June 2023 Pages: 2911 - 2920