1. Surface roughness of as-printed polymers: a comprehensive review

   • Ali Payami Golhin
   • Riccardo Tonello
   • Are Strandlie

   Critical Review Open access 27 May 2023 Pages: 987 - 1043

   

2. Mechanism and modeling of machining process damping: a review

   • Jia Feng
   • Xue-Ting Liu

   Critical Review 01 June 2023 Pages: 1045 - 1069

   

3. Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects

   • Danil Yu. Pimenov
   • Lucas Freitas Berti
   • Khaled Giasin

   Critical Review Open access 01 June 2023 Pages: 1071 - 1102

   

4. A state of the art on surface morphology of selective laser-melted metallic alloys

   • Mustafa Kuntoğlu
   • Emin Salur
   • Jinyang Xu

   Critical Review Open access 02 June 2023 Pages: 1103 - 1142

   

5. Application of machine learning for fleet-based condition monitoring of ball screw drives in machine tools

   • Berend Denkena
   • Marc-André Dittrich
   • Marius Lindauer

   ORIGINAL ARTICLE Open access 23 May 2023 Pages: 1143 - 1164

   

6. Effect of rotational speed and feed rate on microstructure and mechanical properties of 6061 aluminum alloy manufactured by additive friction stir deposition

   • Gang Chen
   • Kai Wu
   • Fengfeng Hu

   ORIGINAL ARTICLE 23 May 2023 Pages: 1165 - 1176

   

7. Modeling and process parameter optimization of laser cutting based on artificial neural network and intelligent optimization algorithm

   • Xingfei Ren
   • Jinwei Fan
   • Kun Sun

   ORIGINAL ARTICLE 23 May 2023 Pages: 1177 - 1188

   

8. Laser metal deposition of mechanical milled IN718/Al₂O₃ nanocomposite

   • Haideé Ruiz-Luna
   • Pedro Márquez-Martínez
   • Enrique Martínez-Franco

   ORIGINAL ARTICLE 24 May 2023 Pages: 1189 - 1197

   

9. Effect of the rolling speed on the flow field and solidification welding line of the roll casting for AZ31 magnesium alloy

   • Zhiquan Huang
   • Zhiqin Zhao
   • Tao Zhang

   ORIGINAL ARTICLE 24 May 2023 Pages: 1199 - 1208

   

10. Experimental investigation of the influence of wire offset and composition on complex profile WEDM of Ti6Al4V using trim-pass strategy

    • Muhammad Rehan
    • Sarmad Ali Khan
    • Luciano Lamberti

    ORIGINAL ARTICLE 25 May 2023 Pages: 1209 - 1224

    

11. Statistical investigation on the failure of misaligned contaminated EHL rolling contacts using response surface methodology

    • Abdelmalek Mostefaoui
    • Mohamed Rafik Sari
    • Mohamed R. Eid

    ORIGINAL ARTICLE 25 May 2023 Pages: 1225 - 1242

    

12. Effect of eggshell powder on the microstructural and thermal behavior of Al7075/waste eggshell surface composites produced by solid-state friction stir processing developed for potential thermal applications

    • Ashish Kumar Srivastava
    • Akash Nag
    • Sergej Hloch

    ORIGINAL ARTICLE Open access 25 May 2023 Pages: 1243 - 1261

    

13. Evaluation of specific cutting energy, tool wear, and surface roughness in dry turning of titanium grade 3 alloy

    • Adnan Ahmad
    • Sohail Akram
    • Muhammad Ali Khan

    ORIGINAL ARTICLE 25 May 2023 Pages: 1263 - 1274

    

14. Design of VHF micro-EDM discharge state detection method based on energy coupling detection

    • Lu Liao
    • Yongbin Zhang
    • Yue Dai

    ORIGINAL ARTICLE 25 May 2023 Pages: 1275 - 1291

    

15. Cooling channel free surface optimisation for additively manufactured casting tools

    • Tongyan Zeng
    • Essam Abo-Serie
    • James Jewkes

    ORIGINAL ARTICLE Open access 26 May 2023 Pages: 1293 - 1315

    

16. Machining deformation control methods and analysis of a thin-walled gear spoke plate

    • Haixiang Huan
    • Ke Zhang
    • Mengxiong Wang

    ORIGINAL ARTICLE 26 May 2023 Pages: 1317 - 1331

    

17. Kiln predictive modelization for performance optimization

    • Mohammed Toum Benchekroun
    • Smail Zaki
    • Mohamed Aboussaleh

    ORIGINAL ARTICLE 26 May 2023 Pages: 1333 - 1339

    

18. Study on temperature field, microstructure, and properties of T2 pure copper by bobbin tool friction stir welding

    • Yumeng Sun
    • Wei Liu
    • Wenbiao Gong

    ORIGINAL ARTICLE 26 May 2023 Pages: 1341 - 1353

    

19. An analytical local tool path smoothing method with curvature control

    • Gang Zhao
    • Zixuan Wei
    • Fubao Xie

    ORIGINAL ARTICLE 26 May 2023 Pages: 1355 - 1375

    

20. Investigation on three-stage stamping of micro-channels with titanium ultra-thin sheet used for PEM fuel cell bipolar plates

    • Qi Zhong
    • Risheng Hua
    • Feng Chen

    ORIGINAL ARTICLE 26 May 2023 Pages: 1377 - 1389

    

21. Mechanical and microstructural features of wire-and-arc additively manufactured carbon steel thick plates

    • Vittoria Laghi
    • Lidiana Arrè
    • Michele Palermo

    ORIGINAL ARTICLE Open access 26 May 2023 Pages: 1391 - 1405

    

22. A practical prediction method for grinding accuracy based on multi-source data fusion in manufacturing

    • Haipeng Wu
    • Zhihang Li
    • Lianchang Zhao

    ORIGINAL ARTICLE 27 May 2023 Pages: 1407 - 1417

    

23. Removing hole blockages from thermal barrier coatings using low-pressure abrasive water jet

    • Zhuang Liu
    • Changshui Gao
    • Zhongyu Wang

    ORIGINAL ARTICLE 29 May 2023 Pages: 1419 - 1431

    

24. High-efficiency EDM based on a composite pulse current

    • Xiaoming Yue
    • Qi Sun
    • Qinhe Zhang

    ORIGINAL ARTICLE 29 May 2023 Pages: 1433 - 1446

    

25. A review of recent advances in robotic belt grinding of superalloys

    • Xukai Ren
    • Xiaokang Huang
    • Xiaoqi Chen

    ORIGINAL ARTICLE 29 May 2023 Pages: 1447 - 1482

    

26. Real-time estimate and control contour errors for five-axis local smoothed toolpaths based on airthoid splines

    • Xiaoyong Huang
    • Baoqing Chen
    • Xuesong Mei

    ORIGINAL ARTICLE 29 May 2023 Pages: 1483 - 1504

    

27. A multi-material additive manufacturing virtual prototyping method for design to improve part strength

    • Shivaram Kakaraparthi
    • Niechen Chen

    ORIGINAL ARTICLE 30 May 2023 Pages: 1505 - 1516

    

28. Development and implementation of in-process, orbiting laser-assisted healing technique on fused filament fabrication

    • Pu Han
    • Sihan Zhang
    • Keng Hsu

    ORIGINAL ARTICLE 30 May 2023 Pages: 1517 - 1524

    

29. A spindle thermal error modeling based on 1DCNN-GRU-Attention architecture under controlled ambient temperature and active cooling

    • Guangjie Jia
    • Xu Zhang
    • Nuodi Huang

    ORIGINAL ARTICLE 30 May 2023 Pages: 1525 - 1539

    

30. Microstructural development during additive manufacturing of biomedical grade Ti-6Al-4V alloy by three-dimensional binder jetting: material aspects and mechanical properties

    • Abdolreza Simchi
    • Frank Petzoldt
    • Lea Reineke

    ORIGINAL ARTICLE 30 May 2023 Pages: 1541 - 1558

    

31. Investigation on electrochemical characteristics of forged Ti-48Al-2Cr-2Nb in NaNO₃ solution for its application on the manufacture of aero-engine blades

    • Yudi Wang
    • Zhengyang Xu

    ORIGINAL ARTICLE 30 May 2023 Pages: 1559 - 1573

    

32. Quantifying the influence of reinforcement architecture on the planar mechanical properties of 3D-printed continuous fiber-reinforced thermoplastic composites

    • Andrés De la Fuente
    • Rodrigo Castillo
    • Carlos Medina

    ORIGINAL ARTICLE 30 May 2023 Pages: 1575 - 1583

    

33. An analytical approach of multiple-aisle shuttle-based storage and retrieval systems

    • Michael Eder

    ORIGINAL ARTICLE Open access 30 May 2023 Pages: 1585 - 1596

    

34. Comparison of Taguchi method and grey relational analysis method in process parameter optimization for shear thickening polishing of YAG crystal

    • Wei Fang
    • Yu Zhou
    • Binghai Lyu

    ORIGINAL ARTICLE 31 May 2023 Pages: 1597 - 1608

    

35. 3D surface topography analysis and functionality-related performance of the machined surface in slot micro-milling titanium alloy Ti6Al4V

    • Yabo Zhang
    • Qingshun Bai
    • Peng Wang

    ORIGINAL ARTICLE 31 May 2023 Pages: 1609 - 1629

    

36. Pervasive Augmented Reality to support logistics operators in industrial scenarios: a shop floor user study on kit assembly

    • Rafael Maio
    • André Santos
    • Beatriz Sousa Santos

    ORIGINAL ARTICLE Open access 31 May 2023 Pages: 1631 - 1649

    

37. Underflow concentration prediction based on improved dual bidirectional LSTM for hierarchical cone thickener system

    • Yongxiang Lei
    • Hamid Reza Karimi

    ORIGINAL ARTICLE Open access 31 May 2023 Pages: 1651 - 1662

    

38. Low-carbon design based on conceptual design methods for mechanical and electrical products

    • Guohua Gao
    • Xue Yang
    • Zhenjiang Zhu

    ORIGINAL ARTICLE 31 May 2023 Pages: 1663 - 1674

    

39. Multi-indicator evaluation and material selection of hybrid additive-subtractive manufacturing to repair automobile panel dies and molds

    • Meng Liu
    • Chunzheng Duan
    • Feng Wang

    ORIGINAL ARTICLE 31 May 2023 Pages: 1675 - 1690

    

40. Modeling and investigation of minimum chip thickness for silicon carbide during quasi-intermittent vibration–assisted swing cutting

    • Mingqi Guo
    • Mingming Lu
    • Yongshen Du

    ORIGINAL ARTICLE 31 May 2023 Pages: 1691 - 1701

    

41. The effect of RFSSW parameters on load capacity of EN AW-6082-T6 aluminum alloy and AlCu bimetallic joints

    • Andrzej Kubit
    • Koen Faes
    • Ľuboš Kaščák

    ORIGINAL ARTICLE Open access 31 May 2023 Pages: 1703 - 1719

    

42. State-space theory–based closed-loop control of machining error of thin-walled part modeling and application

    • Haibo Liu
    • Xingliang Chai
    • Yongqing Wang

    ORIGINAL ARTICLE 31 May 2023 Pages: 1721 - 1735

    

43. Maraging steel powder recycling effect on the tensile and fatigue behavior of parts produced through the laser powder bed fusion (L-PBF) process

    • Othmane Rayan
    • Jean Brousseau
    • Abderrazak El Ouafi

    ORIGINAL ARTICLE 01 June 2023 Pages: 1737 - 1754

    

44. Determining the mechanism of defect formation and material flow characteristics in underwater stationary shoulder friction stir welding using coupled Eulerian-Lagrangian simulation

    • Akbar Hosseini
    • Alireza Fallahi Arezoudar

    ORIGINAL ARTICLE 01 June 2023 Pages: 1755 - 1778

    

45. Energy absorbing 4D printed meta-sandwich structures: load cycles and shape recovery

    • Annamaria Gisario
    • Maria Pia Desole
    • Massimiliano Barletta

    ORIGINAL ARTICLE Open access 01 June 2023 Pages: 1779 - 1795

    

46. Multi-point incremental bending of doubly curved high strength steel sheet under minimum strain energy loading path

    • Feifei Zhang
    • Kai He
    • Bo Huang

    ORIGINAL ARTICLE 01 June 2023 Pages: 1797 - 1809

    

47. Effects of cold-rolling operation parameters on the surface quality of stainless steel and titanium strips with oil pits

    • Yeau-Ren Jeng
    • Jong-Ning Aoh
    • Pay-Yau Huang

    ORIGINAL ARTICLE 01 June 2023 Pages: 1811 - 1821

    

48. Effects of multi-pass turning on surface properties of AISI 52100 bearing steel

    • Huan Xue
    • Yansong Zhang
    • Zihang Yu

    ORIGINAL ARTICLE 01 June 2023 Pages: 1823 - 1833

    

49. Can you notice my attention? A novel information vision enhancement method in MR remote collaborative assembly

    • YuXiang Yan
    • Xiaoliang Bai
    • Bing Zhang

    ORIGINAL ARTICLE 02 June 2023 Pages: 1835 - 1857

    

50. Evaluating digital work instructions with augmented reality versus paper-based documents for manual, object-specific repair tasks in a case study with experienced workers

    • Leon Eversberg
    • Jens Lambrecht

    ORIGINAL ARTICLE Open access 02 June 2023 Pages: 1859 - 1871