1. Corner milling force prediction and improvement method of aviation thin-walled structural parts

   • Zhitao Chen
   • Caixu Yue
   • Steven Y. Liang

   Critical Review 27 March 2023 Pages: 2785 - 2801

   

2. Research on imminent enlargements of smart materials and structures towards novel 4D printing (4DP: SMs-SSs)

   • Muhammad Imran Farid
   • Wenzheng Wu
   • Zhao Yu

   Critical Review 29 March 2023 Pages: 2803 - 2823

   

3. A critical review on tool wear mechanism and surface integrity aspects of SiCp/Al MMCs during turning: prospects and challenges

   • Rashid Ali Laghari
   • Muhammad Jamil
   • Samir Mekid

   Critical Review 29 March 2023 Pages: 2825 - 2862

   

4. Research progress of eco-friendly grinding technology for aviation nickel-based superalloys

   • Tao Zhu
   • Ming Cai
   • Qiang Gong

   Critical Review 05 April 2023 Pages: 2863 - 2886

   

5. Bio-inspired design, modeling, and 3D printing of lattice-based scale model scooter decks

   • Naser Namvar
   • Ilya Moloukzadeh
   • Mahdi Bodaghi

   ORIGINAL ARTICLE Open access 15 March 2023 Pages: 2887 - 2903

   

6. Influence of post-weld heat treatment in buttered interface of AISI 4130 and Inconel alloy welded joints

   • Roneles de Santana Silva
   • Mario César Sánchez Orozco
   • José Hilton Ferreira da Silva

   ORIGINAL ARTICLE 24 March 2023 Pages: 2905 - 2916

   

7. A literature review in heat source thermal modeling applied to welding and similar processes

   • Ernandes J. G. Nascimento
   • Elisan dos Santos Magalhães
   • Luiz Eduardo dos Santos Paes

   ORIGINAL ARTICLE 25 March 2023 Pages: 2917 - 2957

   

8. A non-supporting printing algorithm for fused filament fabrication of multi-branch structure

   • Pengfei Tang
   • Xianfeng Zhao
   • Hongyan Shi

   ORIGINAL ARTICLE 27 March 2023 Pages: 2959 - 2974

   

9. Research on the algorithm of constant force grinding controller based on reinforcement learning PPO

   • Tie Zhang
   • Chao Yuan
   • Yanbiao Zou

   ORIGINAL ARTICLE 27 March 2023 Pages: 2975 - 2988

   

10. Study on dynamic drilling forces of CFRP/Ti stacks during longitudinal-torsional ultrasonic vibration drilling

    • Dong Wang
    • Zheng Li
    • Tao Li

    ORIGINAL ARTICLE 27 March 2023 Pages: 2989 - 3004

    

11. Thermoelectric coupling deep drawing process of ZK60 magnesium alloys

    • Le Zhan
    • Ruixin Li
    • Zhiqing Lv

    ORIGINAL ARTICLE 27 March 2023 Pages: 3005 - 3014

    

12. Influence of infiltration pressure on the window size and relative density of open-cell porous aluminium manufactured by replication casting

    • Romanus Egwonwu Njoku
    • Oloche Oyihi Boniface
    • Victor Sunday Aigbodion

    ORIGINAL ARTICLE 27 March 2023 Pages: 3015 - 3021

    

13. Laser-directed energy deposition of CoCrFeNiTi high entropy alloy coatings: effects of powder geometry and laser power

    • Yunze Li
    • Dongzhe Zhang
    • Weilong Cong

    ORIGINAL ARTICLE 27 March 2023 Pages: 3023 - 3038

    

14. The use of wavelet transform to evaluate the sensitivity of acoustic emission signals attributes to variation of cutting parameters in milling aluminum alloys

    • Reza Asadi
    • Seyed Ali Niknam
    • Iñigo Flores Ituarte

    ORIGINAL ARTICLE 28 March 2023 Pages: 3039 - 3052

    

15. A feasibility study of promoting osseointegration surface roughness by micro-milling of Ti-6Al-4V biomedical alloy

    • Cristian Cappellini
    • Alessio Malandruccolo
    • Aldo Attanasio

    ORIGINAL ARTICLE Open access 28 March 2023 Pages: 3053 - 3067

    

16. Random forests based classification of tool wear using vibration signals and wear area estimation from tool image data

    • Basil Cardoz
    • Haris Naiyer E Azam Shaikh
    • Sabareesh Geetha Rajasekharan

    ORIGINAL ARTICLE 28 March 2023 Pages: 3069 - 3081

    

17. The effects of central cross-section diameters of rollers on doubly curved surface rolling

    • Xiang Chang
    • Wenzhi Fu
    • Yushan Deng

    ORIGINAL ARTICLE 28 March 2023 Pages: 3083 - 3092

    

18. Machine learning augmented X-ray computed tomography features for volumetric defect classification in laser beam powder bed fusion

    • Jiafeng Ye
    • Arun Poudel
    • Nima Shamsaei

    ORIGINAL ARTICLE 28 March 2023 Pages: 3093 - 3107

    

19. Research and development of multi-axis CNC abrasive belt-grinding machine postprocessor

    • Hu Qiao
    • Zhenxing Wei
    • Ying Xiang

    ORIGINAL ARTICLE 29 March 2023 Pages: 3109 - 3131

    

20. High-efficiency abrasive water jet milling of aspheric RB-SiC surface based on BP neural network depth control models

    • Hongxing Deng
    • Peng Yao
    • Dun Liu

    ORIGINAL ARTICLE 29 March 2023 Pages: 3133 - 3148

    

21. Mechanical characterization and sustainability assessment of recycled EVA for footwears

    • Iacopo Bianchi
    • Archimede Forcellese
    • Alessio Vita

    ORIGINAL ARTICLE Open access 29 March 2023 Pages: 3149 - 3160

    

22. Influence of electropulsing assisted on machining properties of Ti-6Al-4V titanium alloy

    • Shengguan Qu
    • Jianshuo Zhai
    • Xiaoqiang Li

    ORIGINAL ARTICLE 29 March 2023 Pages: 3161 - 3174

    

23. Fabrication of semicircular micro-grooves on Ti6Al4V by through-mask scanning electrochemical machining

    • Guodong Miao
    • Shuai Ao
    • Di Zhu

    ORIGINAL ARTICLE 29 March 2023 Pages: 3175 - 3192

    

24. Evaluation of laser cleaning effect for the removal of paint on aluminum alloys

    • Zejia Zhao
    • Xin Liu
    • Feng Song

    ORIGINAL ARTICLE 29 March 2023 Pages: 3193 - 3203

    

25. Simulation and experiment of WEDM double-scale array microstructure surface wetting performance

    • Zhaolong Li
    • Wangwang Li
    • Mengchen Yuan

    ORIGINAL ARTICLE 30 March 2023 Pages: 3205 - 3218

    

26. Predicting flatness of strip tandem cold rolling using a general regression neural network optimized by differential evolution algorithm

    • Jianwei Zhao
    • Jingdong Li
    • Quan Yang

    ORIGINAL ARTICLE 30 March 2023 Pages: 3219 - 3233

    

27. Experimental study of micromilling process and deburring electropolishing process on FeCo-based soft magnetic alloys

    • Gabriel Villalba-Alumbreros
    • Enrique Lopez-Camara
    • Efren Diez-Jimenez

    ORIGINAL ARTICLE Open access 30 March 2023 Pages: 3235 - 3248

    

28. A numerical investigation on the effect of transfer medium in explosive forming

    • Rasid Ahmed Yildiz

    ORIGINAL ARTICLE 30 March 2023 Pages: 3249 - 3265

    

29. Adjusting machined surface integrity of aluminum–silicon alloy through step-by-step feed cutting and multi-step finish cutting method

    • Zhaohui Guo
    • Xiaoli Zhu
    • Anhai Li

    ORIGINAL ARTICLE 30 March 2023 Pages: 3267 - 3281

    

30. Vibration-based fault diagnosis of dynamic rotating systems for real-time maintenance monitoring

    • Sail Hadj Laaradj
    • Lousdad Abdelkader
    • Nouioua Mourad

    ORIGINAL ARTICLE 30 March 2023 Pages: 3283 - 3296

    

31. A new multiple dependent state sampling plan based on one-sided process capability indices

    • Ching-Ho Yen
    • Chia-Hao Chang
    • Chun-Chia Lee

    ORIGINAL ARTICLE 31 March 2023 Pages: 3297 - 3309

    

32. Application of the upper bound theorem for metal forming processes considering an arbitrary isotropic pressure-independent yield criterion with no strength differential effect

    • Sergei Alexandrov
    • Elena Lyamina
    • Yeau-Ren Jeng

    ORIGINAL ARTICLE 31 March 2023 Pages: 3311 - 3321

    

33. Optimization of process parameters for the development of Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy system via spark plasma sintering

    • Emmanuel Olorundaisi
    • Bukola Joseph Babalola
    • Peter A. Olubambi

    ORIGINAL ARTICLE Open access 31 March 2023 Pages: 3323 - 3337

    

34. Effect of the mask geometry on the microstructure forming in through-mask electrochemical micromachining

    • Guoqian Wang
    • Shan Jiang
    • Yan Zhang

    ORIGINAL ARTICLE 31 March 2023 Pages: 3339 - 3351

    

35. An efficient geometric error modelling algorithm of CNC machine tool without interference of higher-order error terms

    • Shuang Ding
    • Zhanqun Song
    • Aiping Song

    ORIGINAL ARTICLE 31 March 2023 Pages: 3353 - 3366

    

36. Sub-zero milling of Ti-6Al-4V—impact of the cutting parameters on the resulting forces, tool wear, and surface quality

    • Kevin Gutzeit
    • Georgis Bulun
    • Jan C. Aurich

    ORIGINAL ARTICLE Open access 31 March 2023 Pages: 3367 - 3381

    

37. Volume monitoring of the milling tool tip wear and breakage based on multi-focus image three-dimensional reconstruction

    • Yeping Peng
    • Shucong Qin
    • Shiping Nie

    ORIGINAL ARTICLE 01 April 2023 Pages: 3383 - 3400

    

38. Real-time smooth trajectory generation for 3-axis blending tool-paths based on FIR filtering

    • Jun Fang
    • Bingran Li
    • Peiqing Ye

    ORIGINAL ARTICLE 01 April 2023 Pages: 3401 - 3416

    

39. Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect

    • Vincenzo Lunetto
    • Manuela De Maddis
    • Pasquale Russo Spena

    ORIGINAL ARTICLE 01 April 2023 Pages: 3417 - 3435

    

40. A novel cold air electrostatic minimum quantity lubrication (CAEMQL) technique for the machining of titanium alloys Ti–6Al–4 V

    • Fucai Liu
    • Xizhuan Wu
    • Xuefeng Xu

    ORIGINAL ARTICLE 01 April 2023 Pages: 3437 - 3452

    

41. Precision allocation method of large-scale CNC hobbing machine based on precision-cost comprehensive optimization

    • Zongyan Hu
    • Shilong Wang
    • Chi Ma

    ORIGINAL ARTICLE 01 April 2023 Pages: 3453 - 3474

    

42. Drilling force prediction and drill wear monitoring for PCB drilling process based on spindle current signal

    • Qifeng Tan
    • Hao Tong
    • Yong Li

    ORIGINAL ARTICLE 03 April 2023 Pages: 3475 - 3487

    

43. Design of a truss-structured compliant toolholder for machining of structured surfaces

    • Vinodth Paniselvam
    • A. Senthil Kumar

    ORIGINAL ARTICLE 03 April 2023 Pages: 3489 - 3501

    

44. On the creation of structured abrasive tools via multiple-pass rotary wire EDM: A geometrical model

    • Bixuan Wang
    • Gongyu Liu
    • Hao Nan Li

    ORIGINAL ARTICLE 03 April 2023 Pages: 3503 - 3522

    

45. Enhancement of Machinability Study in Longitudinal Ultrasonic Vibration-assisted Milling Inconel 718 Using High-frequency-vibration Spindle

    • Moran Xu
    • Shuo Chen
    • Tae Jo Ko

    ORIGINAL ARTICLE 03 April 2023 Pages: 3523 - 3542

    

46. Error separation and compensation of arc wheel grinding for SiC segmented mirror considering wheel wear

    • Yuyang Zhao
    • Yifan Zhang
    • Yuehong Yin

    ORIGINAL ARTICLE 03 April 2023 Pages: 3543 - 3554

    

47. The effect of geometric design and materials on section properties of additively manufactured lattice elements

    • Abduladheem Almalki
    • David Downing
    • Martin Leary

    ORIIGINAL ARTICLE Open access 03 April 2023 Pages: 3555 - 3577

    

48. A CFD model with free surface tracking: predicting fill level and residence time in a starve-fed single-screw extruder

    • Erik Holmen Olofsson
    • Michael Roland
    • Jesper Henri Hattel

    ORIGINAL ARTICLE Open access 04 April 2023 Pages: 3579 - 3591

    

49. Prediction and validation of melt pool dimensions and geometric distortions of additively manufactured AlSi10Mg

    • Rizwan Ullah
    • Junhe Lian
    • Esko Niemi

    ORIGINAL ARTICLE Open access 04 April 2023 Pages: 3593 - 3613

    

50. Edge drop control characteristics of the taper-work roll contour for six-high cold mill

    • Zhen Wei
    • Qinglong Wang
    • Dianhua Zhang

    ORIGINAL ARTICLE 04 April 2023 Pages: 3615 - 3635