1. Advance in experimental research on cutting temperature of titanium alloys

   • Weijun Liu
   • Guohe Li
   • Feng Wang

   Critical Review 23 March 2023 Pages: 1827 - 1844

   

2. An investigation of the shearing performance and sheared surface characterisation of ultra-strength DP steel-Al explosive welded plate composite

   • Bilge Demir
   • Khalil Belras Ali
   • Mustafa Acarer

   ORIGINAL ARTICLE 16 March 2023 Pages: 1845 - 1861

   

3. Analytical modelling and experimental study of surface roughness in ultrasonic elliptical vibration assisted ultra-precision cutting of Ti-6Al-4 V alloy

   • Rongkai Tan
   • Xuesen Zhao
   • Tao Sun

   ORIGINAL ARTICLE 16 March 2023 Pages: 1863 - 1875

   

4. Investigation on the effects of tooth profile deviation in gear rolling process

   • Bo Peng
   • Yuanxin Luo
   • Yongqin Wang

   ORIGINAL ARTICLE 16 March 2023 Pages: 1877 - 1887

   

5. Microstructure design and preparation of cermet tool material based on wear prediction

   • Dong Wang
   • Tongxin Wang
   • Jingjing Zhang

   ORIGINAL ARTICLE 16 March 2023 Pages: 1889 - 1906

   

6. Design of additive manufactured reference block with disk reflectors for sensitivity calibration of ultrasonic angle beam probes

   • Morana Mihaljević
   • Damir Markučič
   • Karlo Kožić

   ORIGINAL ARTICLE 16 March 2023 Pages: 1907 - 1918

   

7. Surface micro-texture and tribological properties in longitudinal-torsional ultrasonic-assisted milling Ti₂AlNb

   • Ziwen Xia
   • Guofu Gao
   • Chenwei Shan

   ORIGINAL ARTICLE 16 March 2023 Pages: 1919 - 1935

   

8. Iterative optimization of time-variant kinematic model for dynamic error compensation of robot vision measurement system

   • Fan Ye
   • Yukun Wang
   • Juntong Xi

   ORIGINAL ARTICLE 17 March 2023 Pages: 1937 - 1949

   

9. Design and evaluation of algorithms for stacking irregular 3D objects using an automated material handling system

   • Ming-Cheng Ko
   • Sheng-Jen Hsieh

   ORIGINAL ARTICLE 17 March 2023 Pages: 1951 - 1964

   

10. Piezoresistive behavior of DLP 3D printed CNT/polymer nanocomposites under monotonic and cyclic loading

    • Omar Waqas Saadi
    • Andreas Schiffer
    • S. Kumar

    ORIGINAL ARTICLE Open access 17 March 2023 Pages: 1965 - 1978

    

11. Estimation of the droplet detachment frequency using SSAS and PSD techniques in GMAW process under different transfer modes

    • Omar Fethi Benaouda
    • Mohamed Mezaache
    • Azzedine Bendiabdellah

    ORIGINAL ARTICLE 18 March 2023 Pages: 1979 - 1996

    

12. A novel analytic model for sealing performance of static metallic joint considering the yield hardening effect

    • Lichuan Deng
    • Bin Luo
    • Biao Liang

    ORIGINAL ARTICLE 18 March 2023 Pages: 1997 - 2010

    

13. 3-D optical microscopy with a new synthetic SFF algorithm to reconstruct surfaces with various specular and diffusive reflectance

    • Yu-Sheng Chen
    • Liang-Chia Chen

    ORIGINAL ARTICLE 18 March 2023 Pages: 2011 - 2023

    

14. Hot working behaviour of low-cost Ti-3.4Fe bio-implant alloy

    • Dineo Mosoma
    • Desmond Klenam
    • Michael Bodunrin

    ORIGINAL ARTICLE Open access 18 March 2023 Pages: 2025 - 2036

    

15. Analytical model of grinding force for ultrasonic-assisted grinding of C_f/SiC composites

    • Menghua Zhang
    • Ziwen Xia
    • Ming Luo

    ORIGINAL ARTICLE 18 March 2023 Pages: 2037 - 2052

    

16. Prediction for surface roughness of the large-pitch internal thread based on homologous isomerism data

    • Zhe Li
    • Xiaobo Qin
    • Quanjian Zhang

    ORIGINAL ARTICLE 18 March 2023 Pages: 2053 - 2064

    

17. Research of horizontal vibratory finishing for aero-engine blades: movement characteristics and action behavior of media

    • Jiaming Wang
    • Xiuhong Li
    • Shengqiang Yang

    ORIGINAL ARTICLE 18 March 2023 Pages: 2065 - 2081

    

18. Optimization method for rough-finish milling allowance based on depth control of milling affected layer

    • Hongmin Xin
    • Maiming Dong
    • Xingtong Li

    ORIGINAL ARTICLE 18 March 2023 Pages: 2083 - 2095

    

19. Achieving batch-size-of-one production model in robot flexible assembly cells

    • Ziyue Jin
    • Romeo M. Marian
    • Javaan S. Chahl

    ORIGINAL ARTICLE Open access 18 March 2023 Pages: 2097 - 2116

    

20. Local corner smoothing algorithm for screw motor high-precision machining

    • Dao-Yang Yu
    • Zhi Ding
    • Xiao-Yong Huang

    ORIGINAL ARTICLE 18 March 2023 Pages: 2117 - 2127

    

21. Cloud-based 3D printing service allocation models for mass customization

    • Kai Kang
    • Bing Qing Tan
    • Ray Y. Zhong

    ORIGINAL ARTICLE 18 March 2023 Pages: 2129 - 2145

    

22. Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties

    • Sven Helge Klippstein
    • Ivo Kletetzka
    • Hans-Joachim Schmid

    ORIGINAL ARTICLE Open access 18 March 2023 Pages: 2147 - 2157

    

23. Posture adjustment method of large aircraft components based on multiple numerical control positioners

    • Wenmin Chu
    • Gen Li
    • Xiang Huang

    ORIGINAL ARTICLE 18 March 2023 Pages: 2159 - 2174

    

24. Effect of surface texture, viewing angle, and surface condition on the emissivity of wire arc directed energy deposition manufactured 7075 nano treated aluminum alloy

    • Shiyu Teng
    • Shirin Dehgahi
    • Ahmed Qureshi

    ORIGINAL ARTICLE 20 March 2023 Pages: 2175 - 2189

    

25. Prediction of bending parameters and automated operation planning for sheet-metal bending orientated to graphical programming

    • Fengyu Xu
    • Dawei Ding
    • Sen Yang

    ORIGINAL ARTICLE 20 March 2023 Pages: 2191 - 2204

    

26. Autonomous mobile robots for recycling metal shaving at CNC factories

    • Ching-Yuan Chang
    • Chi-Lun Wu
    • Siao-Jhu Jian

    ORIGINAL ARTICLE 20 March 2023 Pages: 2205 - 2218

    

27. Experimental and numerical study of the flaring process for Zircaloy tube end

    • Xufeng Wang
    • Xiaoyu Huang
    • Jinshan Li

    ORIGINAL ARTICLE 20 March 2023 Pages: 2219 - 2232

    

28. Latency mitigation using applied HMMs for mixed reality-enhanced intuitive teleoperation in intelligent robotic welding

    • Yunpeng Su
    • Leo Lloyd
    • J. Geoffrey Chase

    ORIGINAL ARTICLE Open access 20 March 2023 Pages: 2233 - 2248

    

29. Study on the organization and properties of Ti–6Al–4 V fabricated by laser powder bed fusion based on the thickness of the gradient layer

    • Peng Wang
    • Dongju Chen
    • Gang Li

    ORIGINAL ARTICLE 20 March 2023 Pages: 2249 - 2267

    

30. Synthesis of Ti₃C₂T_x/ZnO composites decorated with PEDOT:PSS for NO₂ gas sensors

    • Shih-Feng Tseng
    • Yi-Hao Lin
    • Wen-Tse Hsiao

    ORIGINAL ARTICLE 20 March 2023 Pages: 2269 - 2281

    

31. Numerical investigation and experimental validation of Lemaitre ductile damage model for DC04 steel and application to deep drawing process

    • Salah Laboubi
    • Ouzine Boussaid
    • Walid Ghennai

    ORIGINAL ARTICLE 20 March 2023 Pages: 2283 - 2294

    

32. The improvement of diamond-like carbon coatings for tribological and tribo-corrosion applications in automobile engines: an updated review study

    • Funsho Olaitan Kolawole
    • Olawale Samson Kolade
    • André Paulo Tschiptschin

    ORIGINAL ARTICLE 21 March 2023 Pages: 2295 - 2322

    

33. Development and testing of novel mineral oil- and biocide-free glycerol- and propanediol-based fluids for drilling and tapping aluminium alloys

    • Alexander Leiden
    • Robar Arafat
    • Hubertus Wichmann

    ORIGINAL ARTICLE Open access 21 March 2023 Pages: 2323 - 2336

    

34. Application of graph theory for detecting carriers’ collisions in braiding machines

    • Pascal Assi
    • Sofiane Achiche
    • Louis Laberge Lebel

    ORIGINAL ARTICLE 21 March 2023 Pages: 2337 - 2348

    

35. 3D printing from micro-CT images of the trochlea of the superior oblique muscle and its future applications

    • Hyunkyoo Kang
    • Guk Bae Kim
    • Andrew G. Lee

    ORIGINAL ARTICLE 21 March 2023 Pages: 2349 - 2355

    

36. Influence of the scale effect on the constraint effect in welded joints with soft interlayers

    • Egor Valerievich Terentyev
    • Daria Alexandrovna Zhgut
    • Khariton Maksimovich Kozyrev

    ORIGINAL ARTICLE 21 March 2023 Pages: 2357 - 2368

    

37. Correction to: Influence of the scale effect on the constraint effect in welded joints with soft interlayers

    • Egor Valerievich Terentyev
    • Daria Alexandrovna Zhgut
    • Khariton Maksimovich Kozyrev

    Correction 28 March 2023 Pages: 2369 - 2369

38. Numerical simulation and experiment study on hot extrusion process of 18Ni (250) maraging steel large fan shaft for aero-engines

    • Zuofa Liu
    • Guoyong Deng
    • Jie Zhou

    ORIGINAL ARTICLE 22 March 2023 Pages: 2371 - 2386

    

39. Ti6Al4V grinding using different lubrication modes for minimizing energy consumption

    • Yassmin Seid Ahmed
    • Luis Wilfredo Hernández González

    ORIGINAL ARTICLE 22 March 2023 Pages: 2387 - 2405

    

40. Modeling of solid–liquid coupling and material removal in robotic wet polishing

    • Jie Pan
    • Fan Chen
    • Peng Ruan

    ORIGINAL ARTICLE 22 March 2023 Pages: 2407 - 2428

    

41. Theoretical and experimental analysis of plasma radius expansion model in EDM: a comprehensive study

    • Emmanouil L. Papazoglou
    • Panagiotis Karmiris-Obratański
    • Angelos P. Markopoulos

    ORIGINAL ARTICLE Open access 22 March 2023 Pages: 2429 - 2444

    

42. Development of Co-Cr-Mo-xTi alloys by micro-plasma-based 3D printing for knee implant applications and its biocompatibility assessment

    • Pankaj Kumar
    • Mayur S. Sawant
    • Sharad Gupta

    ORIGINAL ARTICLE 22 March 2023 Pages: 2445 - 2459

    

43. Effect of tool geometry and cutting parameters on surface quality and chip morphology of amorphous electroless nickel-phosphorus alloy in ultra-precision turning

    • Xiaoyu Bao
    • Peng Yao
    • Chuanzhen Huang

    ORIGINAL ARTICLE 22 March 2023 Pages: 2461 - 2478

    

44. Correction to: Effect of tool geometry and cutting parameters on surface quality and chip morphology of amorphous electroless nickel‑phosphorus alloy in ultra‑precision turning

    • Xiaoyu Bao
    • Peng Yao
    • Chuanzhen Huang

    Correction 14 April 2023 Pages: 2479 - 2479

45. Optimal determination of spindle speed variation type for the suppression of chatter in turning

    • Ryong Paek
    • Song-Ho Ha
    • Sang-Chon Ri

    ORIGINAL ARTICLE 22 March 2023 Pages: 2481 - 2496

    

46. Research on the wall thinning influencing factors in die-less spinning by hemisphere roller

    • Shuyang Zhou
    • Zhiren Han
    • Xue Gong

    ORIGINAL ARTICLE 22 March 2023 Pages: 2497 - 2508

    

47. Forming challenges of small and complex fiber metal laminate parts in aerospace applications—a review

    • Hamza Blala
    • Lihui Lang
    • Sergei Alexandrov

    ORIGINAL ARTICLE 22 March 2023 Pages: 2509 - 2543

    

48. Real-time milling force monitoring based on a parallel deep learning model with dual-channel vibration fusion

    • Kunhong Chen
    • Wanhua Zhao
    • Xing Zhang

    ORIGINAL ARTICLE 23 March 2023 Pages: 2545 - 2565

    

49. Comparison of electromagnetic-driven stamping and electromagnetic forming limit curves for AA5182-O aluminum alloy sheet

    • Wei Liu
    • Jinjie Wu
    • Shangyu Huang

    ORIGINAL ARTICLE 23 March 2023 Pages: 2567 - 2577

    

50. Research on chip mechanism of Inconel 718 with ultrasonic assisted drilling by step drill

    • Qi Wang
    • Dazhong Wang
    • Yu Fang

    ORIGINAL ARTICLE 23 March 2023 Pages: 2579 - 2594