1. Research status of the influence of machining processes and surface modification technology on the surface integrity of bearing steel materials

   • Yongjie Cheng
   • Yanshuang Wang
   • Pu Zhang

   Critical Review 30 January 2023 Pages: 2897 - 2923

   

2. Graphene-reinforced metal matrix composites: fabrication, properties, and challenges

   • Dongju Chen
   • Jia Li
   • Jinwei Fan

   Critical Review 01 February 2023 Pages: 2925 - 2965

   

3. Optimization techniques for energy efficiency in machining processes—a review

   • Fatima Zohra El abdelaoui
   • Abdelouahhab Jabri
   • Abdellah El Barkany

   Critical Review 02 February 2023 Pages: 2967 - 3001

   

4. Towards advanced manufacturing systems for large parts: a review

   • Lu Yong
   • Ma Zhifu
   • Xue Yuan

   Critical Review 03 February 2023 Pages: 3003 - 3022

   

5. Finite element simulation of single-particle impact in polymeric cold spray and comparison to experimental results

   • Bahareh Estejab
   • Zahra Khalkhali

   ORIGINAL ARTICLE 27 January 2023 Pages: 3023 - 3036

   

6. Criterion and processing-dependence of forming states in the die-less spinning of conical part

   • Xinggang Yan
   • Mei Zhan
   • Yongdi Wang

   ORIGINAL ARTICLE 28 January 2023 Pages: 3037 - 3051

   

7. Overlap ratio and scanning strategy effects on laser powder bed fusion Ti6Al4V: numerical thermal modeling and experiments

   • Anping Dong
   • Dafan Du
   • Baode Sun

   ORIGINAL ARTICLE 28 January 2023 Pages: 3053 - 3067

   

8. Effect of the inclined angle of micromilling tool on the fabrication of the microfluidic channel

   • Yanquan Geng
   • Suyu Zhang
   • Yongda Yan

   ORIGINAL ARTICLE 30 January 2023 Pages: 3069 - 3079

   

9. Experimental investigation on tool wear in ultrasonic vibration-assisted turning of SiC_f/SiC ceramic matrix composite

   • Cong Liu
   • Wenhu Wang
   • Liangwan Li

   ORIGINAL ARTICLE 30 January 2023 Pages: 3081 - 3101

   

10. Anhydros-based shear-thickening ultra-precision polishing of KDP crystal

    • Linbin Huang
    • Xu Wang
    • Julong Yuan

    ORIGINAL ARTICLE 30 January 2023 Pages: 3103 - 3115

    

11. Sustainable production of AlSi10Mg parts by laser powder bed fusion process

    • Vincenza Mercurio
    • Flaviana Calignano
    • Luca Iuliano

    ORIGINAL ARTICLE Open access 30 January 2023 Pages: 3117 - 3133

    

12. Assessment of the surface integrity of AISI H13 tool steel after milling with carbide and cermet inserts

    • Michele Lisboa Silveira
    • Diogo Azevedo de Oliveira
    • Alexandre Mendes Abrão

    ORIGINAL ARTICLE 30 January 2023 Pages: 3135 - 3148

    

13. Geometric-kinematic model for reinforced concrete core drilling

    • Lucas Marra
    • Stefan Fabbro
    • Konrad Wegener

    ORIGINAL ARTICLE Open access 30 January 2023 Pages: 3149 - 3158

    

14. Optimization method of spindle speed with the consideration of chatter and forced vibration for five-axis flank milling

    • Yuyang Tang
    • Jun Zhang
    • Wanhua Zhao

    ORIGINAL ARTICLE 30 January 2023 Pages: 3159 - 3169

    

15. Global toolpath modulation–based contour error pre-compensation for multi-axis CNC machining

    • Yang Liu
    • Mansen Chen
    • Yuwen Sun

    ORIGINAL ARTICLE 30 January 2023 Pages: 3171 - 3189

    

16. A composite strategy for high-quality and high-efficiency milling of alumina ceramic via femtosecond laser burst-mode

    • Bokun Fang
    • Chenbin Ma
    • Xingsheng Wang

    ORIGINAL ARTICLE 30 January 2023 Pages: 3191 - 3204

    

17. Residual stress control of hot-rolled strips during run-out table cooling

    • Hao Wu
    • Jie Sun
    • Dianhua Zhang

    ORIGINAL ARTICLE 30 January 2023 Pages: 3205 - 3227

    

18. Effect of induced plastic strain on the porosity of PA12 printed through selective laser sintering studied by X-ray computed micro-tomography

    • Chiara Morano
    • Maria Caterina Crocco
    • Leonardo Pagnotta

    ORIGINAL ARTICLE 31 January 2023 Pages: 3229 - 3240

    

19. Double-sided injection lap riveting

    • João P. M. Pragana
    • Rui F. V. Sampaio
    • Paulo A. F. Martins

    ORIGINAL ARTICLE Open access 31 January 2023 Pages: 3241 - 3253

    

20. Effect of power spinning on microstructure and wear resistance of high-speed laser cladding Fe-based coating

    • Qiaofeng Bai
    • Qihang Li
    • Yingliang Liu

    ORIGINAL ARTICLE 31 January 2023 Pages: 3255 - 3265

    

21. Effect of laser shock peening on the tensile behavior and notch sensitivity of Ni-based single-crystal superalloy

    • Yongxiang Geng
    • Xinpeng Cao
    • Yixin Xiao

    ORIGINAL ARTICLE 31 January 2023 Pages: 3267 - 3276

    

22. Tooth flank machining and modelling of line contact spiral bevel gears with the conical finger-type milling cutter

    • Mingyang Wang
    • Lun Li
    • Yuehai Sun

    ORIGINAL ARTICLE 31 January 2023 Pages: 3277 - 3291

    

23. Measurement of pressure–volume–temperature diagrams based on simulated melt temperature and actual cavity pressure

    • Bo-Wei Zhu
    • Shih-Chih Nian
    • Ming-Shyan Huang

    ORIGINAL ARTICLE 31 January 2023 Pages: 3293 - 3304

    

24. Optimal process planning for energy consumption and product quality during double-sided incremental forming

    • Praveen K
    • Venkata Reddy N
    • Kristian Martinsen

    ORIGINAL ARTICLE 31 January 2023 Pages: 3305 - 3327

    

25. Machining process condition monitoring based on ordinal pattern analysis and image matching

    • Yazhou Li
    • Wei Dai
    • Yihai He

    ORIGINAL ARTICLE 31 January 2023 Pages: 3329 - 3347

    

26. Computational modular system configuration with backward compatibility

    • John Jung-Woon Yoo

    ORIGINAL ARTICLE 31 January 2023 Pages: 3349 - 3362

    

27. An image-processing approach for polishing metal additive manufactured components to improve the dimensional accuracy and surface integrity

    • P. M. Abhilash
    • Afzaal Ahmed

    ORIGINAL ARTICLE 31 January 2023 Pages: 3363 - 3383

    

28. A posture detection method for augmented reality–aided assembly based on YOLO-6D

    • Liping Zhang
    • Feng Xu
    • Dunwen Zuo

    ORIGINAL ARTICLE 31 January 2023 Pages: 3385 - 3399

    

29. Manufacturing and optimization of the effect of casting process parameters on the compressive strength of aluminum/pumice/carbonated coal hybrid composites: Taguchi and regression analysis approach

    • Tanimu Kogi Ibrahim
    • Danjuma Saleh Yawas
    • Adetayo Abdulmumin Adebisi

    ORIGINAL ARTICLE 31 January 2023 Pages: 3401 - 3414

    

30. Correction to: Manufacturing and optimization of the effect of casting process parameters on the compressive strength of aluminum/pumice/carbonated coal hybrid composites: Taguchi and regression analysis approach

    • Tanimu Kogi Ibrahim
    • Danjuma Saleh Yawas
    • Adetayo Abdulmumin Adebisi

    Correction 09 February 2023 Pages: 3415 - 3415

31. Flow defects of rib-web components in isothermal local-loading forming process

    • Xintong Li
    • Chaoyang Sun
    • Jingchen Liu

    ORIGINAL ARTICLE 01 February 2023 Pages: 3417 - 3429

    

32. An effective method for predicting the shape of doubly curved sheet metal in continuous roll forming

    • Jiaxin Gao
    • Zhongyi Cai
    • Qingmin Chen

    ORIGINAL ARTICLE 01 February 2023 Pages: 3431 - 3448

    

33. Experimental investigation on surface integrity and fatigue of nickel-based single-crystal superalloy DD6 during grinding-shot peening composite manufacturing

    • Changfeng Yao
    • Jianxin Luo
    • Ya Zhang

    ORIGINAL ARTICLE 01 February 2023 Pages: 3449 - 3463

    

34. Evaluating the optimized lubri-cooling technique for various cutting conditions in through-feed centerless grinding process

    • Luiz Maurício Gonçalves Neto
    • Rafael Lemes Rodriguez
    • Eduardo Carlos Bianchi

    ORIGINAL ARTICLE 01 February 2023 Pages: 3465 - 3473

    

35. An accuracy evolution method applied to five-axis machining of curved surfaces

    • Jun Zha
    • Nagore Villarrazo
    • Luis Norberto López de Lacalle

    ORIGINAL ARTICLE Open access 01 February 2023 Pages: 3475 - 3487

    

36. Study on multi-roller flow forming process of aluminum alloy cylinders with cross ribs

    • Zhongqi Yu
    • Yehui Meng
    • Yixi Zhao

    ORIGINAL ARTICLE 01 February 2023 Pages: 3489 - 3501

    

37. Comparison between in-mould and grid-as-mould aluminum foaming process by induction heating

    • Antonio Formisano
    • Massimo Durante
    • Francesco Galise

    ORIGINAL ARTICLE Open access 02 February 2023 Pages: 3503 - 3511

    

38. Computational modeling of the effects of process parameters on the grain morphology of additively manufactured stainless steel

    • Saeed Ataollahi
    • MohammadBagher Mahtabi
    • Mohammad J. Mahtabi

    ORIGINAL ARTICLE 02 February 2023 Pages: 3513 - 3526

    

39. A novel strengthening process to improve the strength of AL5052 square clinched joint

    • Xiaolei Gao
    • Chao Chen

    ORIGINAL ARTICLE 02 February 2023 Pages: 3527 - 3538

    

40. Robotic abrasive belt grinding with consistent quality under normal force variations

    • Geng Chen
    • Jianzhong Yang
    • Hua Liu

    ORIGINAL ARTICLE 02 February 2023 Pages: 3539 - 3549

    

41. Chatter stability analysis of a six-axis milling robot

    • Guosheng Xie
    • Yang Xu
    • Peibo Li

    ORIGINAL ARTICLE 02 February 2023 Pages: 3551 - 3561

    

42. Numerical modeling from process to residual stress induced in resistance spot welding of DP980 steel

    • Sendong Ren
    • Wenjia Huang
    • Wenze Deng

    ORIGINAL ARTICLE 02 February 2023 Pages: 3563 - 3576

    

43. Influence of unilateral constraint on machining dynamics of large overhang milling cutter

    • Fangting Meng
    • Qinghua Song
    • Zhanqiang Liu

    ORIGINAL ARTICLE 02 February 2023 Pages: 3577 - 3591

    

44. Generation and experimental verification of time and energy optimal coverage motion for industrial machines using a modified S-curve trajectory

    • Mathias Sebastian Halinga
    • Haryson Johanes Nyobuya
    • Naoki Uchiyama

    ORIGINAL ARTICLE 02 February 2023 Pages: 3593 - 3605

    

45. Graph-based assembly sequence planning algorithm with feedback weights

    • Xiaojun Zhu
    • Zhigang Xu
    • Linlin Fan

    ORIGINAL ARTICLE 02 February 2023 Pages: 3607 - 3617

    

46. Effect mechanism of water as liquid medium on mixed-gas atomization discharge ablation process on titanium alloy

    • Linglei Kong
    • Weining Lei
    • Zhidong Liu

    ORIGINAL ARTICLE 02 February 2023 Pages: 3619 - 3632

    

47. Study on the mechanism of unidirectional loading rubber bulging of bionic egg-shaped shell

    • Zhengxian Shi
    • Zhiying Sun
    • Ming Zhan

    ORIGINAL ARTICLE 02 February 2023 Pages: 3633 - 3649

    

48. Global toolpath smoothing for CNC machining based on B-spline approximation with tool tip position adjustment

    • Li Hua
    • Nuodi Huang
    • Limin Zhu

    ORIGINAL ARTICLE 02 February 2023 Pages: 3651 - 3665

    

49. A genetic algorithm with path-relinking for operation sequencing in CAPP

    • Jianping Dou
    • Shuai Wang
    • Yunde Shi

    ORIGINAL ARTICLE 02 February 2023 Pages: 3667 - 3690

    

50. Investigation on the electrical characteristics of ultrasonic vibration unit in rotary ultrasonic machining

    • Yi-Jia Sun
    • Zhen Chen
    • Shu-Yu Gui

    ORIGINAL ARTICLE 02 February 2023 Pages: 3691 - 3700