1. Announcement of B. John Davies Prize for the best paper published in IJAMT in 2021

   • Silvia Schilgerius
   • Andrew Y. C. Nee

   Editorial 08 February 2023 Pages: 2005 - 2005

2. Thanking reviewers

   • Andrew Y C Nee
   • Silvia Schilgerius

   Editorial 21 February 2023 Pages: 2007 - 2019

3. PDE-based spiral machining trajectory planning method without tool feed marks on 2D arrayed multi-island regions

   • Songjian Wang
   • Chengxin Wang
   • Yongqing Wang

   ORIGINAL ARTICLE 16 January 2023 Pages: 2021 - 2034

   

4. Effects of print parameters and heat treatment on fatigue of laser powder bed fused Inconel 718

   • Anthony P. Marino
   • Shyam Balasubramanian
   • Wayne Hung

   Original Article 16 January 2023 Pages: 2035 - 2054

   

5. Room temperature enhancement of flexural strength in silicon carbide green body via the addition of cellulose nanofiber

   • Teruyoshi Kanno
   • Hiroki Kurita
   • Fumio Narita

   Original Article Open access 16 January 2023 Pages: 2055 - 2064

   

6. A methodology to predict thermal crack initiation region of tool for high-speed milling compacted graphite iron based on three-dimensional transient thermal stress field model

   • Limei Wang
   • Hanlian Liu
   • Quanquan Han

   ORIGINAL ARTICLE 16 January 2023 Pages: 2065 - 2075

   

7. Study on surface roughness and morphology of diamond wire as-sawn sapphire crystal wafers

   • Zhenfeng Zhu
   • Yufei Gao

   ORIGINAL ARTICLE 17 January 2023 Pages: 2077 - 2090

   

8. Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing

   • Lars Rath
   • Zina Kallien
   • Benjamin Klusemann

   ORIGINAL ARTICLE Open access 17 January 2023 Pages: 2091 - 2102

   

9. Hob performance degradation assessment method based on cyclic statistical energy

   • Feiyun Cong
   • Jiani Wu
   • Faxiang Xie

   ORIGINAL ARTICLE 17 January 2023 Pages: 2103 - 2120

   

10. Effect of pre-consolidated interlayer on the interfacial evolution and mechanical properties of thermo-compensated resistance brazing welded Al/steel joints

    • Jiang Yu
    • Guo Yu
    • Jianguo Gao

    ORIGINAL ARTICLE 17 January 2023 Pages: 2121 - 2132

    

11. Wear measurement of ultrathin grinding wheel using fiber optical sensor for high-precision wafer dicing

    • Fengjun Chen
    • Jianhang Huang
    • Tian Hu

    ORIGINAL ARTICLE 18 January 2023 Pages: 2133 - 2145

    

12. Analysis of residual stress of gear tooth root after shot peening process

    • Zhen Ma
    • Tianyu Chen
    • Chao Chang

    ORIGINAL ARTICLE 18 January 2023 Pages: 2147 - 2160

    

13. Effect of riveting displacement on the mechanical behavior of CFRP bolted joints with elliptical-head non-lug self-locking rivet nut

    • Jian Wang
    • Chunrun Zhu
    • Yunbo Bi

    ORIGINAL ARTICLE 18 January 2023 Pages: 2161 - 2182

    

14. An adaptive bonnet polishing approach based on dual-mode contact depth TIF

    • Jingbo Feng
    • Yifan Zhang
    • Yuehong Yin

    ORIGINAL ARTICLE 18 January 2023 Pages: 2183 - 2194

    

15. A vision-based calibration method for aero-engine blade-robotic grinding system

    • Chen Chen
    • Zhenhua Cai
    • Xufeng Liang

    ORIGINAL ARTICLE 18 January 2023 Pages: 2195 - 2209

    

16. Heat transfer in aluminum-steel joint and weld tool during the friction stir welding: Simulation and experimental validation

    • Wenmin Ou
    • Guolin Guo
    • Longgen Qian

    ORIGINAL ARTICLE 19 January 2023 Pages: 2211 - 2224

    

17. Grasping point optimization for sheet metal part based on GSA-Kriging model in a multi-robot assembly system

    • Chenxi Zhu
    • Xiao-Jin Wan
    • Zhengjie Zhou

    ORIGINAL ARTICLE 19 January 2023 Pages: 2225 - 2242

    

18. Machinability investigation using Cu-mixed biodegradable dielectric for eco-friendly/sustainable machining of Ni-based superalloy

    • Kashif Ishfaq
    • Mudassar Rehman

    ORIGINAL ARTICLE 19 January 2023 Pages: 2243 - 2264

    

19. Ultrasonic vibration–assisted magnetorheological hybrid finishing process for glass optics

    • Prabhat Kumar Baghel
    • Vinod Mishra
    • Gufran Sayeed Khan

    ORIGINAL ARTICLE 20 January 2023 Pages: 2265 - 2276

    

20. Effect of different rivet structures on the interface and properties of Al and Mg welded-riveted hybrid joining

    • Ziqian Sun
    • Hongyang Wang
    • Liming Liu

    Original Article 20 January 2023 Pages: 2277 - 2287

    

21. Laser shock forging—a novel in situ method designed towards controlling residual stresses in laser metal deposition

    • Yongkang Zhang
    • Shupeng Cai
    • Xiaojian Huo

    ORIGINAL ARTICLE 20 January 2023 Pages: 2289 - 2304

    

22. Numerical simulation of micro-element cutting and milling force prediction in micro ball-end milling

    • Yigang Sun
    • Shenghui Hou
    • Fangchao Yan

    ORIGINAL ARTICLE 20 January 2023 Pages: 2305 - 2322

    

23. Study on milling material removal mechanism and surface integrity of nickel-based single crystal superalloy DD5

    • Huan Zhang
    • Yadong Gong
    • Jibin Zhao

    ORIGINAL ARTICLE 20 January 2023 Pages: 2323 - 2338

    

24. Application of neural network in micromechanical deformation behaviors of Inconel 740H alloy

    • Xiaojun Wang
    • Yu Liu
    • Yafeng Ji

    ORIGINAL ARTICLE 20 January 2023 Pages: 2339 - 2348

    

25. Design, manufacturing, and testing of a laser textured piston ring surface reinforced with a CuCoBe–diamond composite by hot-pressing

    • Rita Ferreira
    • Ângela Cunha
    • Filipe Silva

    ORIGINAL ARTICLE Open access 20 January 2023 Pages: 2349 - 2362

    

26. Study on the influence of rhenium and grain boundaries on the surface quality of Ni-based superalloys

    • Ming Cai
    • Tao Zhu
    • Ning Yu

    ORIGINAL ARTICLE 20 January 2023 Pages: 2363 - 2378

    

27. Improvement of corrosion resistance of additive manufactured AISI 316L stainless steel in a physiological environment by TiN surface coating

    • Houda Yahyaoui
    • Naoufel Ben Moussa
    • Nizar Ben Salah

    ORIGINAL ARTICLE 20 January 2023 Pages: 2379 - 2391

    

28. HDR image-based deep learning approach for automatic detection of split defects on sheet metal stamping parts

    • Aru Ranjan Singh
    • Thomas Bashford-Rogers
    • Sumit Hazra

    ORIGINAL ARTICLE Open access 21 January 2023 Pages: 2393 - 2408

    

29. Camera-based high precision position detection for hybrid additive manufacturing with laser powder bed fusion

    • Benjamin Merz
    • Ricardo Nilsson
    • Kai Hilgenberg

    ORIGINAL ARTICLE Open access 21 January 2023 Pages: 2409 - 2424

    

30. Analysis of energy transfer process in magnetic pulse welding and optimization of system efficiency

    • Zhi Li
    • Wenxiong Peng
    • Huaiqing Zhang

    ORIGINAL ARTICLE 21 January 2023 Pages: 2425 - 2434

    

31. Investigation on self-sensing monitoring and resonant control of ultrasonic vibration–assisted cutting

    • Fuhang Yu
    • Chen Zhang
    • Xin Hu

    ORIGINAL ARTICLE 21 January 2023 Pages: 2435 - 2453

    

32. Automatic inspection of paperboard creases to improve the quality of the packaging process

    • Marco Ojer
    • Hugo Alvarez
    • Luis Amozarrain

    ORIGINAL ARTICLE 21 January 2023 Pages: 2455 - 2466

    

33. Cooperative human–robot polishing for the task of patina growing on high-quality leather shoes

    • Jorge Borrell
    • Alejandra González
    • J. Ernesto Solanes

    ORIGINAL ARTICLE Open access 22 January 2023 Pages: 2467 - 2484

    

34. High-temperature failure and microstructural investigation of wire-arc additive manufactured Rene 41

    • William Sean James
    • Supriyo Ganguly
    • Goncalo Pardal

    ORIGINAL ARTICLE Open access 23 January 2023 Pages: 2485 - 2501

    

35. Study on white layer formation during machined surface evolution in high-speed machining of rail steel

    • Liyao Gu

    ORIGINAL ARTICLE 23 January 2023 Pages: 2503 - 2516

    

36. Numerical simulation and experimental study on two-stage flow forming for thin-walled tubular parts with deep longitudinal outer ribs

    • Jiadong Deng
    • Tian Yuan
    • Yanhua Zhang

    ORIGINAL ARTICLE 23 January 2023 Pages: 2517 - 2533

    

37. Proposed composite similarity metric method for part family formation in reconfigurable manufacturing system

    • Rutuja Shivdas
    • Sagar Sapkal

    ORIGINAL ARTICLE 23 January 2023 Pages: 2535 - 2548

    

38. On the sensitivity of the three-dimensional random representative finite element model of multiple shot impacts to the SP-induced stress field, Almen intensity, and surface roughness

    • Cheng Wang
    • Xinrong Tao
    • Haishun Deng

    ORIGINAL ARTICLE 23 January 2023 Pages: 2549 - 2567

    

39. Mechanical characterization of high volume fraction Al7075-Al₂O₃ composite fabricated by semisolid powder processing

    • Saeed Aghajani
    • Vahid Pouyafar
    • Amir Bolouri

    ORIGINAL ARTICLE Open access 23 January 2023 Pages: 2569 - 2580

    

40. Investigation of forming defects in 5A06 aluminum alloy cold stamping of thin-walled shell with corner

    • Jiapeng Wang
    • Jinping Liu
    • Baoyu Wang

    ORIGINAL ARTICLE 23 January 2023 Pages: 2581 - 2592

    

41. Effect of femtosecond laser modification on magnetorheological finishing of magnesium aluminate spinel

    • Daicheng Qin
    • Junwei Wu
    • Fang Ji

    ORIGINAL ARTICLE 23 January 2023 Pages: 2593 - 2600

    

42. Measurement and identification of translational static stiffness in workspace of a machine tool

    • Joanna Jastrzębska
    • Arkadiusz Parus
    • Piotr Pawełko

    ORIGINAL ARTICLE Open access 23 January 2023 Pages: 2601 - 2608

    

43. Fabrication strategy and macroscopic defect control of large-size component based on double-wire arc additive manufacturing

    • Tianqiu Xu
    • Jiawei Liu
    • Changmeng Liu

    ORIGINAL ARTICLE 23 January 2023 Pages: 2609 - 2625

    

44. Correction to: Fabrication strategy and macroscopic defect control of large‑size component based on double‑wire arc additive manufacturing

    • Tianqiu Xu
    • Jiawei Liu
    • Changmeng Liu

    Correction 01 February 2023 Pages: 2627 - 2628

    

45. Improvement of thermal plasma sprayed coating adhesion strength by laser microtexturing of aluminum

    • Anustup Chakraborty
    • Benjamin Chalfant
    • Mool C. Gupta

    ORIGINAL ARTICLE 24 January 2023 Pages: 2629 - 2642

    

46. In-Mold Electronics on Poly(Lactic Acid): towards a more sustainable mass production of plastronic devices

    • Caroline Goument
    • Tony Gerges
    • Michel Cabrera

    ORIGINAL ARTICLE 24 January 2023 Pages: 2643 - 2660

    

47. Phase transformation and deformation of the high-frequency induction brazed grinding wheel based on multi-field coupling

    • Qilin Li
    • Xichao Wang
    • Weining Lei

    ORIGINAL ARTICLE 24 January 2023 Pages: 2661 - 2671

    

48. Optimizing the cutting edge geometry of micro drill based on the entropy weight method

    • Haotian Yang
    • Feng Jiang
    • Mingsheng Wang

    ORIGINAL ARTICLE 24 January 2023 Pages: 2673 - 2689

    

49. Laser welding of tailored blanks made of Al-Si-coated 22MnB5 steel using a filler wire and a variable energy distribution laser optics

    • Donato Coviello
    • Jana von der Heydt
    • Donato Sorgente

    ORIGINAL ARTICLE Open access 25 January 2023 Pages: 2691 - 2704

    

50. Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil baths

    • Katerina Mouralova
    • Libor Benes
    • Tomas Plichta

    ORIGINAL ARTICLE 25 January 2023 Pages: 2705 - 2715