1. Optimisation of downskin parameters to produce metallic parts via laser powder bed fusion process: an overview

   • Vittorio Viale
   • John Stavridis
   • Abdollah Saboori

   Critical Review Open access 02 November 2022 Pages: 2159 - 2182

   

2. Study on near-net forming technology for bars by axial feed skew rolling based on taper-end billets

   • Huibo Zhang
   • Baoyu Wang
   • Zheng Li

   ORIGINAL ARTICLE 26 October 2022 Pages: 2183 - 2194

   

3. Formation mechanism and mechanical performance of ultrasonic-assisted soldered joints of SiC_p/2024Al composites at low temperature

   • Guojing Xu
   • Ziyang Xiu
   • Jiuchun Yan

   ORIGINAL ARTICLE 27 October 2022 Pages: 2195 - 2208

   

4. Tool wear state recognition based on WOA-SVM with statistical feature fusion of multi-signal singularity

   • Xiaoyu Gai
   • Yaonan Cheng
   • Mengda Lu

   ORIGINAL ARTICLE 27 October 2022 Pages: 2209 - 2225

   

5. Automatic generation of interference-free five-axis sweep scanning paths for inspection of impeller blades

   • Yijun Shen
   • Yaqi Zhang
   • Yang Zhang

   ORIGINAL ARTICLE 27 October 2022 Pages: 2227 - 2237

   

6. Reflective texture-less object registration using multiple edge features for augmented reality assembly

   • Zaixing He
   • Jindong Zhao
   • Huilong Jiang

   ORIGINAL ARTICLE 27 October 2022 Pages: 2239 - 2247

   

7. Experimental investigation to improve the efficiency and surface integrity of deep micro-hole machined by micro-EDM

   • Shaojie Hou
   • Jicheng Bai
   • Huan Liu

   ORIGINAL ARTICLE 27 October 2022 Pages: 2249 - 2259

   

8. Strengthening of duplex stainless steel processed by equal channel angular pressing (ECAP)

   • Jairo Alberto Muñoz
   • Mohan Chand
   • José María Cabrera

   ORIGINAL ARTICLE Open access 27 October 2022 Pages: 2261 - 2278

   

9. Investigations on chip formation mechanism and surface integrity analysis in LAM of 45%SiCp/Al composites

   • Xianjun Kong
   • Guang Hu
   • Zhenlong Wang

   ORIGINAL ARTICLE 28 October 2022 Pages: 2279 - 2293

   

10. Diagnosis of two-axis cylindrical grinder machining error

    • Rohit Roy
    • Wei-Hua Chieng
    • Chung-Ping Chiang

    ORIGINAL ARTICLE 28 October 2022 Pages: 2295 - 2312

    

11. Mechanism of dual-direction vibration-assisted (DVA) micro-milling in surface formation considering the tool life-lengthening effect on the Ti6Al4V: design and experiment

    • Guo Li
    • YuHao Li
    • Bo Wang

    ORIGINAL ARTICLE 28 October 2022 Pages: 2313 - 2330

    

12. Estimation of an elasto-geometric model exploiting a loaded circular test on a machine tool

    • Babak Beglarzadeh
    • René Mayer
    • Andreas Archenti

    ORIGINAL ARTICLE 28 October 2022 Pages: 2331 - 2349

    

13. Analysis of the wear characteristics of multi-directional die forging and forming dies for a railway wagon bogie adapter

    • Hongchao Ji
    • Gang Song
    • Baoyu Wang

    ORIGINAL ARTICLE 28 October 2022 Pages: 2351 - 2370

    

14. Automated quality control inspection of geometric tip defects in medical needle manufacturing

    • Xiaoying Wang
    • Casey Jowers
    • Mark Easton

    ORIGINAL ARTICLE Open access 28 October 2022 Pages: 2371 - 2384

    

15. Micromachining of an axisymmetric and high aspect ratio channel in PBX9502 by a femtosecond laser

    • Song Wu
    • Caiwei Xiao
    • Zhimin Cao

    ORIGINAL ARTICLE 29 October 2022 Pages: 2385 - 2392

    

16. NC process analysis–based intersecting machining feature recognition and reuse approach

    • Jiachen Liang
    • Shusheng Zhang
    • Rui Huang

    ORIGINAL ARTICLE 29 October 2022 Pages: 2393 - 2413

    

17. Densification and wear behavior of Cu-TiC composites via spark plasma sintering in situ degassing

    • Rasidi Sule
    • Bamidele L. Bayode
    • Oluwasegun E. Falodun

    ORIGINAL ARTICLE 29 October 2022 Pages: 2415 - 2426

    

18. A comprehensive review of tool surface texturing in the cutting process

    • Xiaorong Zhou
    • Lin He
    • Zichuan Zou

    ORIGINAL ARTICLE 29 October 2022 Pages: 2427 - 2467

    

19. Behavior of microcapsules in FML under different pressure of manufacturing in autoclave

    • Monika Ostapiuk

    ORIGINAL ARTICLE Open access 29 October 2022 Pages: 2469 - 2480

    

20. Modeling machining of aluminum honeycomb structure

    • Tarik Zarrouk
    • Jamal-Eddine Salhi
    • Najim Salhi

    ORIGINAL ARTICLE 31 October 2022 Pages: 2481 - 2500

    

21. Metal functionally graded gyroids: additive manufacturing, mechanical properties, and simulation

    • Fabrizia Caiazzo
    • Vittorio Alfieri
    • Annalaura Fabbricatore

    ORIGINAL ARTICLE Open access 31 October 2022 Pages: 2501 - 2518

    

22. Additive manufacturing for capacitive liquid level sensors

    • Gianni Stano
    • Attilio Di Nisio
    • Gianluca Percoco

    ORIGINAL ARTICLE Open access 31 October 2022 Pages: 2519 - 2529

    

23. Effects of process parameters on joint formation and tool wear behavior in friction stir welded TA5 alloy

    • Shuaishuai Du
    • Huijie Liu
    • Li Zhou

    ORIGINAL ARTICLE 01 November 2022 Pages: 2531 - 2547

    

24. Investigation on friction characteristics of micro double cup extrusion assisted by different ultrasonic vibration modes

    • Weiqiang Wan
    • Jianfeng Cheng
    • Guangchao Han

    ORIGINAL ARTICLE 01 November 2022 Pages: 2549 - 2560

    

25. Effect of hammer forging impact characteristics on the forming properties of Ti-6Al-4V alloy

    • Xiurong Fang
    • Huihui Xu
    • Xinle Liu

    ORIGINAL ARTICLE 02 November 2022 Pages: 2561 - 2573

    

26. In-process belt-image-based material removal rate monitoring for abrasive belt grinding using CatBoost algorithm

    • Yuxiang Wang
    • Xiaokang Huang
    • Xiaoqi Chen

    ORIGINAL ARTICLE Open access 02 November 2022 Pages: 2575 - 2591

    

27. Recast layer removal of WEDMed surface by wire electrochemical finishing

    • Hongwei Pan
    • Zhidong Liu
    • Xiyuan Yin

    ORIGINAL ARTICLE 02 November 2022 Pages: 2593 - 2604

    

28. Numerical modeling of coupled arc plasma, metal transfer and molten pool evolution for underwater flux-cored arc welding

    • Shichang Xu
    • Yanfei Han
    • Chuansong Wu

    ORIGINAL ARTICLE 03 November 2022 Pages: 2605 - 2622

    

29. Minimization of the vestigial noise problem of empirical wavelet transform to detect bearing faults under time-varying speeds

    • Vikas Sharma
    • Pradeep Kundu

    ORIGINAL ARTICLE 03 November 2022 Pages: 2623 - 2641

    

30. Microstructure, mechanical properties, and corrosion resistance of supermartensitic steel UNS S41426: comparison between forged and hot-rolled seamless pipe

    • Ilson Palmieri Baptista
    • André Rocha Pimenta
    • Sergio Souto Maior Tavares

    ORIGINAL ARTICLE 03 November 2022 Pages: 2643 - 2653

    

31. Airborne acoustic emission of an abrasive waterjet cutting system as means for monitoring the jet cutting capability

    • Edoardo Copertaro
    • Massimiliano Annoni

    ORIGINAL ARTICLE Open access 03 November 2022 Pages: 2655 - 2667

    

32. Spray electrolyte plasma polishing of GH3536 superalloy manufactured by selective laser melting

    • Yuliang Wu
    • Lei Wang
    • Chao Zhang

    ORIGINAL ARTICLE 03 November 2022 Pages: 2669 - 2678

    

33. Effect of kinematic parameters considering workpiece rotation on surface quality in YAG double-sided planetary lapping with the trajectory method

    • Lei Yang
    • Xiaoguang Guo
    • Yufan Jia

    ORIGINAL ARTICLE 03 November 2022 Pages: 2679 - 2690

    

34. Study on the distribution, element characteristics, and formation mechanism of porosity during laser welding for Ti-6Al-4V bottom-locking joint

    • Xufeng Kang
    • Tingyan Yan
    • Xiaohong Zhan

    ORIGINAL ARTICLE 04 November 2022 Pages: 2691 - 2701

    

35. Performance comparison of machine learning models for kerf width prediction in pulsed laser cutting

    • Andhi Indira Kusuma
    • Yi-Mei Huang

    ORIGINAL ARTICLE 04 November 2022 Pages: 2703 - 2718

    

36. Multi-response optimization of IC wire bonding for large probe marks by the RSM and desirability function approach

    • Jing-Er Chiu
    • Chau-Shing Wang
    • Shih-Wen Lu

    ORIGINAL ARTICLE 05 November 2022 Pages: 2719 - 2731

    

37. A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel

    • Sulaymon Eshkabilov
    • Ismat Ara
    • Fardad Azarmi

    ORIGINAL ARTICLE 05 November 2022 Pages: 2733 - 2756

    

38. Effect of PWHT on microstructure and corrosion resistance of the nugget zone in AZ31 friction stir weld

    • Khawla Amara
    • Riad Badji
    • Aicha Ziouche

    ORIGINAL ARTICLE 05 November 2022 Pages: 2757 - 2769

    

39. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique

    • Anthony Gaspar Talon
    • Bruno Kenta Sato
    • José Claudio Lopes

    ORIGINAL ARTICLE 05 November 2022 Pages: 2771 - 2782

    

40. Compensation of electrical current drift in human–robot collision

    • Vinh Nguyen
    • Jennifer Case

    ORIGINAL ARTICLE 05 November 2022 Pages: 2783 - 2791

    

41. A theoretical approach to the residual stress assessment based on thermal field evaluation in laser beam welding

    • Fabio Giudice
    • Andrea Sili

    ORIGINAL ARTICLE Open access 05 November 2022 Pages: 2793 - 2808

    

42. Physics-based analytical modeling of keyhole mode in laser powder bed fusion

    • Wenjia Wang
    • Steven Y. Liang

    ORIGINAL ARTICLE 05 November 2022 Pages: 2809 - 2818

    

43. A model for material removal of robot-assisted blade polishing using abrasive cloth wheel

    • Jingjing Zhang
    • Jia Liu
    • Zhijie Qiao

    ORIGINAL ARTICLE 05 November 2022 Pages: 2819 - 2831

    

44. Microstructure-based finite element modeling of a martensitic stainless steel during hot forging

    • Simin Dourandish
    • Henri Champliaud
    • Mohammad Jahazi

    ORIGINAL ARTICLE 05 November 2022 Pages: 2833 - 2851

    

45. Mechanical properties and interface morphology of magnetic pulse-welded Al–Fe tubes with preset geometric features

    • Haiping Yu
    • Haiqing Dang

    ORIGINAL ARTICLE 07 November 2022 Pages: 2853 - 2868

    

46. Fabrication of high-accuracy micro-holes in micro-EDM under tool electrode spiral motion feed mode combined with fixed reference axial compensation

    • Junfeng Gou
    • Jingyun Lai
    • Jiangwen Liu

    ORIGINAL ARTICLE 07 November 2022 Pages: 2869 - 2882

    

47. A life-cycle digital-twin collaboration framework based on the industrial internet identification and resolution

    • Yepeng Fan
    • Chaoren Dai
    • Man Yan

    ORIGINAL ARTICLE 07 November 2022 Pages: 2883 - 2911

    

48. Development and application of a robotic manipulator system utilizing null-space control for three-dimensional printing

    • Wei-Zhi Lin
    • Han-Pang Huang
    • Chun-Yeon Lin

    ORIGINAL ARTICLE 07 November 2022 Pages: 2913 - 2927

    

49. Multi-objective optimization of cavity design for GH4738 superalloy profile ring rolling process based on FEM and RSM

    • Yang Hu
    • Dong Liu
    • Xinglin Zhu

    ORIGINAL ARTICLE 07 November 2022 Pages: 2929 - 2940

    

50. Analyzing laminated electrode(s) performance for the EDM of microchannel(s) in Al(6061)

    • Kashif Ishfaq
    • Rakhshanda Naveed
    • Mudassar Rehman

    ORIGINAL ARTICLE 07 November 2022 Pages: 2941 - 2958