1. Review of in situ and real-time monitoring of metal additive manufacturing based on image processing

   • Yikai Zhang
   • Shengnan Shen
   • Yaowu Hu

   Critical Review 29 September 2022 Pages: 1 - 20

   

2. A novel design method for TPMS lattice structures with complex contour based on moving elements method

   • Xiangyu Ma
   • David Z. Zhang
   • Xunjia Zheng

   ORIGINAL ARTICLE 23 September 2022 Pages: 21 - 33

   

3. Influence of the atmospheric plasma spraying parameters on the coating structure and the deposition efficiency of silicon powder

   • Kirsten Bobzin
   • Lidong Zhao
   • Elisa Burbaum

   ORIGINAL ARTICLE Open access 23 September 2022 Pages: 35 - 47

   

4. Towards a domain-specific information architecture enabling the investigation and optimization of flexible production systems by utilizing artificial intelligence

   • Christoph Binder
   • Christian Neureiter
   • Arndt Lüder

   ORIGINAL ARTICLE Open access 24 September 2022 Pages: 49 - 81

   

5. Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation

   • Luzhen Chen
   • Wenquan Sun
   • Tieheng Yuan

   ORIGINAL ARTICLE 24 September 2022 Pages: 83 - 98

   

6. Dry machining of nodular cast iron using a YAG-reinforced alumina ceramic cutting tool

   • Leopoldo Ferreira de Sousa
   • Bruno Galvão Simba
   • Claudinei dos Santos

   ORIGINAL ARTICLE 24 September 2022 Pages: 99 - 110

   

7. Optimization of plasma etch rate of deposited thin films by adaptive neuro fuzzy inference system

   • Nikola Petrovic

   ORIGINAL ARTICLE 24 September 2022 Pages: 111 - 118

   

8. Experimental, computational, and data-driven study of the effects of selective laser melting (SLM) process parameters on single-layer surface characteristics

   • Behzad Fotovvati
   • Santosh Rauniyar
   • Kevin Chou

   ORIGINAL ARTICLE 26 September 2022 Pages: 119 - 144

   

9. Investigation and prediction of central cracking in cross wedge rolling

   • Xianyan Zhou
   • Chaoyang Sun
   • Jun Jiang

   ORIGINAL ARTICLE Open access 26 September 2022 Pages: 145 - 159

   

10. Experimental investigation of tool deflection in micro-milling of fine-grained graphite

    • Djordje Cica
    • Branislav Sredanovic
    • Goran Mijušković

    ORIGINAL ARTICLE 26 September 2022 Pages: 161 - 168

    

11. Milling force and tool wear mechanisms on milling TC21 titanium alloy under different lubrication conditions

    • Zhenyu Wang
    • Yingdong Liang
    • Tianbiao Yu

    ORIGINAL ARTICLE 26 September 2022 Pages: 169 - 185

    

12. Study on machining characteristics with variable distribution density micro-texture tools in turning superalloy GH4202

    • Xin Yu
    • Yongguo Wang
    • Yuan Gao

    ORIGINAL ARTICLE 26 September 2022 Pages: 187 - 197

    

13. A 2.5D C/C composite cutting force prediction model based on brittle fracture mechanism

    • Qianrui Zhang
    • Yue Tao
    • Chenwei Shan

    ORIGINAL ARTICLE 27 September 2022 Pages: 199 - 211

    

14. Weld repair of gas turbine disc: optimization of pulsed TIG welding process parameters and microstructural analysis of Cr–Mo-V Steel

    • Parisa Vahdatkhah
    • Seyed Roohallah Tabatabaee Kopaee
    • Hamed Vahdat Khah

    ORIGINAL ARTICLE 27 September 2022 Pages: 213 - 232

    

15. Research on high-frequency induction cladding manufacturing technology by embedding stainless steel capillary tube in shaftclass parts

    • Yongjun Shi
    • Zhengfu Pei
    • Kaijun Fan

    ORIGINAL ARTICLE 27 September 2022 Pages: 233 - 244

    

16. Analysis of a closed-loop digital twin using discrete event simulation

    • Andrew Eyring
    • Nathan Hoyt
    • Yuri Hovanski

    ORIGINAL ARTICLE 27 September 2022 Pages: 245 - 258

    

17. A novel toolpath for 7-NC grinding of blades with force-position matching

    • Yilin Mu
    • Chong Lv
    • Yun Huang

    ORIGINAL ARTICLE 28 September 2022 Pages: 259 - 270

    

18. Fatigue probabilistic assessments on a circular lap welding joint of stainless steels under axial loading

    • Gyoko Oh

    ORIGINAL ARTICLE 28 September 2022 Pages: 271 - 286

    

19. Analysis of machining quality of 304 stainless steel deep hole by changing angle of gun drill

    • Chen Xie
    • Liang Li
    • Yu Pan

    ORIGINAL ARTICLE 28 September 2022 Pages: 287 - 298

    

20. Undeformed chip thickness and machined surface roughness in radial ultrasonic vibration-assisted grinding process

    • Yansong Yue
    • Biao Zhao
    • Wenfeng Ding

    ORIGINAL ARTICLE 28 September 2022 Pages: 299 - 311

    

21. Parametric study of the three-beam laser inside coaxial wire feeding additive manufacturing

    • Fan Liu
    • Shao-Shan Ji
    • Ge-Yan Fu

    ORIGINAL ARTICLE 28 September 2022 Pages: 313 - 330

    

22. Development of an enhanced burr accumulation model during orthogonal cutting of nickel-based super alloy

    • Côme Legrand
    • Guillaume Fromentin
    • Mickael Rancic

    ORIGINAL ARTICLE 28 September 2022 Pages: 331 - 343

    

23. Characteristics of high-shear and low-pressure grinding for Inconel718 alloy with a novel super elastic composite abrasive tool

    • Zhiqiang Gu
    • Yebing Tian
    • Bing Liu

    ORIGINAL ARTICLE 28 September 2022 Pages: 345 - 355

    

24. Analysis of drilling-induced geometrical damages in basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites

    • Gergely Magyar
    • Dóra Károly
    • Norbert Geier

    ORIGINAL ARTICLE Open access 28 September 2022 Pages: 357 - 372

    

25. Influence of welding parameters and surface preparation on thin copper–copper sheets welded by ultrasonic welding process

    • Rafael Nunes
    • Koen Faes
    • Andrzej Kubit

    ORIGINAL ARTICLE Open access 28 September 2022 Pages: 373 - 388

    

26. Modeling and validation of bending force for 6-high tandem cold rolling mill based on machine learning models

    • Jingdong Li
    • Xiaochen Wang
    • Zhonghui Wang

    ORIGINAL ARTICLE 28 September 2022 Pages: 389 - 405

    

27. Modeling and optimization of machining parameters to minimize surface roughness and maximize productivity when turning polytetrafluoroethylene (PTFE)

    • Afef Azzi
    • Lakhdar Boulanouar
    • Mohamed Athmane Yallese

    ORIGINAL ARTICLE 28 September 2022 Pages: 407 - 430

    

28. Mechatronic stiffness of cable-driven mechanisms: a study on production machine model

    • Zdeněk Neusser
    • Martin Nečas
    • Michael Valášek

    ORIGINAL ARTICLE Open access 29 September 2022 Pages: 431 - 446

    

29. Investigation of liquid medium concentration and pressure on formability in laser-activated high-speed hydraulic microforming

    • Yanchen He
    • Huixia Liu
    • Xiao Wang

    ORIGINAL ARTICLE 29 September 2022 Pages: 447 - 464

    

30. Investigation on particle assisted through-mask electrochemical etching of micro pit array

    • Liqun Du
    • Mingxin Yu
    • Junshan Liu

    ORIGINAL ARTICLE 29 September 2022 Pages: 465 - 478

    

31. Backward tube spinning mechanics

    • Eren Can Sariyarlioglu
    • Omer Music
    • Mustafa Bakkal

    ORIGINAL ARTICLE 29 September 2022 Pages: 479 - 491

    

32. Real-time master-based feedrate scheduling with kinematic constraints for five-axis machining

    • Pu-Yang Tang
    • Ming-Tsung Lin
    • Meng-Shiun Tsai

    ORIGINAL ARTICLE 30 September 2022 Pages: 493 - 510

    

33. Machining error model for full machining process of thread milling

    • Yuanhao Fan
    • Junxue Ren
    • Yiran Tang

    ORIGINAL ARTICLE 30 September 2022 Pages: 511 - 526

    

34. Optimization design of process parameters for cold and hot composite roll forming of the AHSS square tube using response surface methodology

    • Yu Wang
    • Zelalem Abathun Mehari
    • Jingtao Han

    ORIGINAL ARTICLE 30 September 2022 Pages: 527 - 542

    

35. Powder bed surface relief formation and denudation in selective laser melting

    • Sergey Grigoriev
    • Riana Ableyeva
    • Andrey Gusarov

    ORIGINAL ARTICLE 01 October 2022 Pages: 543 - 558

    

36. Numerical simulation and experimental validation of deposited corners of any angle in direct ink writing

    • Yongqiang Tu
    • Alaa Hassan
    • Zhangwei Chen

    ORIGINAL ARTICLE 03 October 2022 Pages: 559 - 570

    

37. Influences of shim stiffness on the vibration response of tool-shim system and the impact fracture resistance of cutting tool in intermittent cutting

    • Hongwei Zhang
    • Guosheng Su
    • Hongxia Zhang

    ORIGINAL ARTICLE 03 October 2022 Pages: 571 - 589

    

38. Effective prediction of residual stress and distortion of artificial knee joints by selective laser melting

    • Haoqing Li
    • Ran Zong
    • Xiaoying Fang

    ORIGINAL ARTICLE 03 October 2022 Pages: 591 - 601

    

39. Experimental investigation and parametric optimization of friction stir powder additive manufacturing process for aerospace-grade Al alloy

    • Bhavesh Chaudhary
    • Neelesh Kumar Jain
    • Jayaprakash Murugesan

    ORIGINAL ARTICLE 04 October 2022 Pages: 603 - 625

    

40. An estimation methodology of energy consumption for the intelligent CNC machining using STEP-NC

    • Kang Cheng
    • Gang Zhao
    • Yazui Liu

    ORIGINAL ARTICLE 04 October 2022 Pages: 627 - 644

    

41. Improving the small ball-end magnetorheological polishing efficiency of fused silica workpiece by the promoting effect of water-bath heating and sodium hydroxide addition on polishing velocity and chemical reaction

    • Jinchuan Tian
    • Henan Liu
    • Biao Qin

    ORIGINAL ARTICLE 04 October 2022 Pages: 645 - 656

    

42. High performance supercapacitor active electrode material by drop-casting of graphite and graphene synthesized from rice husk

    • Chukwunonso Okenwa
    • Victor Sunday Aigbodion
    • Peter Ogbuna Offor

    Application 23 September 2022 Pages: 657 - 664

    

43. An improved rational Bezier model for pneumatic constant force control device of robotic polishing with hysteretic nonlinearity

    • Yongjiang Chen
    • Jianghai Zhao
    • Yujie Jin

    Application 26 September 2022 Pages: 665 - 674

    

44. Material kitting in selective assembly: a manual order picking system based on augmented reality

    • Jie Zhang
    • Shuxia Wang
    • Manxian Wang

    Application 03 October 2022 Pages: 675 - 686

    

45. Correction to: Design, modeling, and control of a variable stiffness elbow joint

    • Mario Baggetta
    • Giovanni Berselli
    • Claudio Melchiorri

    Correction Open access 13 August 2022 Pages: 687 - 687