1. A review on dynamics in micro-milling

   • Thomas Heitz
   • Ning He
   • Liang Li

   Critical Review 16 September 2022 Pages: 3467 - 3491

   

2. Advances in ultra-precision machining of bearing rolling elements

   • Chunlei He
   • Jing Zhang
   • Chengzu Ren

   Critical Review 21 September 2022 Pages: 3493 - 3524

   

3. Review of self-cleaning TiO₂ thin films deposited with spin coating

   • Valantine Takwa Lukong
   • Kingsley Ukoba
   • Tien-Chien Jen

   Critical Review 24 September 2022 Pages: 3525 - 3546

   

4. Micro-metal additive manufacturing – state-of-art and perspectives

   • Paulo Henrique Grossi Dornelas
   • Telmo Gomes Santos
   • João Pedro Oliveira

   Critical Review 26 September 2022 Pages: 3547 - 3564

   

5. Optimization of high-speed grinding parameters for anti-fatigue performance of 20CrMnTi steel

   • Zhida Ren
   • Beizhi Li
   • Yawei Zhang

   ORIGINAL ARTICLE 01 September 2022 Pages: 3565 - 3581

   

6. Correction to: Optimization of high‑speed grinding parameters for anti‑fatigue performance of 20CrMnTi steel

   • Zhida Ren
   • Beizhi Li
   • Yawei Zhang

   Correction 16 September 2022 Pages: 3583 - 3583

7. Effect of vibration dimensionality on ultrasonic vibration-assisted electrolytic in-process dressing (ELID) grinding of zirconia ceramics

   • Zongxia Fu
   • Fan Chen
   • Bo Zhao

   ORIGINAL ARTICLE 15 September 2022 Pages: 3585 - 3593

   

8. Research on titanium-copper explosive welding interface with different welding parameters

   • Jian Wang
   • Xiao-jie Li
   • Yu-xin Wang

   ORIGINAL ARTICLE 15 September 2022 Pages: 3595 - 3606

   

9. Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)

   • Kaifur Rashed
   • Abdullah Kafi
   • Stuart Bateman

   ORIGINAL ARTICLE 15 September 2022 Pages: 3607 - 3621

   

10. Modeling of heat transfer, fluid flow, and weld pool dynamics during keyhole laser welding of 316 LN stainless steel using hybrid conical-cylindrical heat source

    • Anoop Karaniath Unni
    • Vasudevan Muthukumaran

    ORIGINAL ARTICLE 15 September 2022 Pages: 3623 - 3645

    

11. Microstructural evolution and properties of cemented carbides alloyed with hexagonal boron nitride (h-BN) using selective laser melting

    • Joseph Agyapong
    • Solomon Hanson Duntu
    • Solomon Boakye -Yiadom

    ORIGINAL ARTICLE 15 September 2022 Pages: 3647 - 3666

    

12. Vibration monitoring and analysis of strip rolling mill based on the digital twin model

    • Yang Zhang
    • Weizhong Wang
    • Xiaozhong Du

    ORIGINAL ARTICLE 16 September 2022 Pages: 3667 - 3681

    

13. Effect of cryogenic cooling on deformation of milled thin-walled titanium alloy parts

    • Fengbiao Wang
    • Yongqing Wang

    ORIGINAL ARTICLE 16 September 2022 Pages: 3683 - 3692

    

14. Comparative evaluation of parametric models of porosity in laser powder bed fusion

    • Luis Waldo Escalona-Galvis
    • John S. Kang

    ORIGINAL ARTICLE 16 September 2022 Pages: 3693 - 3701

    

15. Influence of ZnO nanoparticle addition and spark peak current on EDM process of AISI 1045, AISI 4140, and AISI D3: MRR, surface roughness, and surface topography

    • Masoud Pour
    • S. Ehsan Layegh K.

    ORIGINAL ARTICLE 16 September 2022 Pages: 3703 - 3724

    

16. Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion

    • Yufeng Zhang
    • Xu Li
    • Dianhua Zhang

    ORIGINAL ARTICLE 16 September 2022 Pages: 3725 - 3738

    

17. In situ monitoring of build height during powder-based laser metal deposition

    • Jiayu Ye
    • Nazmul Alam
    • Ivan Cole

    ORIGINAL ARTICLE Open access 16 September 2022 Pages: 3739 - 3750

    

18. Dynamic characteristic reconfiguration of a fixture-workpiece system for vibration suppression in milling of thin-walled workpieces based on MR damping fixture

    • Junjin Ma
    • Yunfei Li
    • Xiaoyan Pang

    ORIGINAL ARTICLE 16 September 2022 Pages: 3751 - 3768

    

19. Active vibration damping for manufacturing machines using additional cable mechanisms: conceptual design

    • Zdeněk Neusser
    • Martin Nečas
    • Zbyněk Šika

    ORIGINAL ARTICLE Open access 16 September 2022 Pages: 3769 - 3787

    

20. Simulation of spiral bevel gear manufacturing by face hobbing and prediction of the cutting forces using a novel CAD-based model

    • Chara Efstathiou
    • Nikolaos Tapoglou

    ORIGINAL ARTICLE 16 September 2022 Pages: 3789 - 3813

    

21. Correction to: Simulation of spiral bevel gear manufacturing by face hobbing and prediction of the cutting forces using a novel CAD‑based model

    • Chara Efstathiou
    • Nikolaos Tapoglou

    Correction 22 September 2022 Pages: 3815 - 3816

    

22. An investigation into the impact of grinding residual stress on the meshing stress of spiral bevel gear

    • Yanzhong Wang
    • Wei Zhang
    • Jihong Liu

    ORIGINAL ARTICLE 17 September 2022 Pages: 3817 - 3835

    

23. The small-size laser shock adhesive-clinching of Al foils

    • Yiqun Wang
    • Guoxin Lu
    • Chao Zheng

    ORIGINAL ARTICLE 17 September 2022 Pages: 3837 - 3848

    

24. Thermal experiments and analysis on adhesive cleaning of work-holding devices by grinding

    • Syed Mustafa Haider
    • Sarmad Ali Khan
    • Kashif Ishfaq

    ORIGINAL ARTICLE Open access 17 September 2022 Pages: 3849 - 3865

    

25. Research on quarter wave shape control of cold rolled high strength steel based on BP-MOPSO

    • Tieheng Yuan
    • Wenquan Sun
    • Shengyi Yong

    ORIGINAL ARTICLE 17 September 2022 Pages: 3867 - 3880

    

26. Machinability assessment model for manufacturing high-temperature martensitic heat-resistant alloy steel via MQL

    • Xun Yang
    • Ling Chen
    • Yan Shui

    ORIGINAL ARTICLE 17 September 2022 Pages: 3881 - 3901

    

27. Effect of end milling, grinding and tartaric-sulfuric anodizing on the fatigue behavior of AA7050 alloy

    • Foued Abroug
    • Etienne Pessard
    • Franck Morel

    ORIGINAL ARTICLE 17 September 2022 Pages: 3903 - 3922

    

28. Regionalized compensation method for nonlinear error control

    • Wei Wei
    • Qingchun Tang
    • Yingguang Pan

    ORIGINAL ARTICLE 17 September 2022 Pages: 3923 - 3936

    

29. Investigation of tool flank wear effect on system stability prediction in the milling of Ti-6AI-4 V thin-walled workpiece

    • Junjin Ma
    • Yunfei Li
    • Xiaoyan Pang

    ORIGINAL ARTICLE 19 September 2022 Pages: 3937 - 3956

    

30. Ineffectiveness of flood cooling in reducing cutting temperatures during continuous machining

    • Sinan Kesriklioglu

    ORIGINAL ARTICLE 19 September 2022 Pages: 3957 - 3968

    

31. Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP

    • Ronan Mathieu
    • Mohamed Ali Charfi
    • Gilbert Lebrun

    ORIGINAL ARTICLE 20 September 2022 Pages: 3969 - 3981

    

32. Structural health monitoring of a linear robot by fiber Bragg grating sensors and cyber-physical system

    • Hsiang-Wei Ho
    • Wei-Hsiang Liao
    • Chien-Ching Ma

    ORIGINAL ARTICLE 20 September 2022 Pages: 3983 - 3995

    

33. Modelling sustainable manufacturing practices effects on sustainable performance: the contingent role of ownership

    • Salwa Hanim Abdul-Rashid
    • Marini Nurbanum Mohamad
    • Ramayah Thurasamy

    ORIGINAL ARTICLE 20 September 2022 Pages: 3997 - 4012

    

34. An in-depth analysis of tool wear mechanisms and surface integrity during high-speed hard turning of AISI D2 steel via novel inserts

    • Sarmad Ali Khan
    • Muhammad Faizan Ameer
    • Abdullah Alfaify

    ORIGINAL ARTICLE Open access 20 September 2022 Pages: 4013 - 4028

    

35. A new method of processing magnesium alloy thin-walled tube by direct extrusion and corrugated equal channel angular extrusion

    • Zhang Ou
    • Hu Hongjun
    • Ou Zhongwen

    ORIGINAL ARTICLE 20 September 2022 Pages: 4029 - 4039

    

36. Microstructure evolution and high cycle fatigue failure behavior of friction stir-welded Ti–6Al–4V at varying welding speeds

    • Peter Madindwa Mashinini
    • Isaac Dinaharan
    • Jebaraj David Raja Selvam

    ORIGINAL ARTICLE 20 September 2022 Pages: 4041 - 4054

    

37. Effects of plasma-MIG hybrid welding parameters on performance and hot cracking susceptibility of 5083 Al alloy butt-joint welds

    • Hsuan-Liang Lin
    • Guan-Ching Chen
    • Ching-Min Cheng

    ORIGINAL ARTICLE 21 September 2022 Pages: 4055 - 4064

    

38. Analysis of the effect of part geometry and cutting parameters over tool vibration and surface integrity on hard turning

    • Felipe Bertolotti Savella
    • Victor Willian Santos Pereira
    • Armando Italo Sette Antonialli

    ORIGINAL ARTICLE 21 September 2022 Pages: 4065 - 4077

    

39. Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessment

    • Milad Najafi
    • Hamed Ahmadi
    • GholamHossein Liaghat

    ORIGINAL ARTICLE 21 September 2022 Pages: 4079 - 4098

    

40. Removal mechanism of submerged air jet polishing considering the state of abrasive particles

    • Lei Zhang
    • Wei Chen
    • Cheng Fan

    ORIGINAL ARTICLE 21 September 2022 Pages: 4099 - 4114

    

41. Research on deep drawing with multi-ring blank holder technique

    • Hongsheng Zhang
    • Siji Qin
    • Linyuan Meng

    ORIGINAL ARTICLE 22 September 2022 Pages: 4115 - 4126

    

42. In situ process monitoring in laser-based powder bed fusion of polyamide 12 using thermal imaging

    • Joseph Hofman
    • Katrin Wudy

    ORIGINAL ARTICLE Open access 22 September 2022 Pages: 4127 - 4138

    

43. A hybrid DMAIC framework for integrating response surface methodology and multi-objective optimization methods

    • Aneirson Francisco da Silva
    • Kaio Max Aranda
    • Rafael de Carvalho Miranda

    ORIGINAL ARTICLE 22 September 2022 Pages: 4139 - 4164

    

44. Contribution to improving hydrodynamics method for hot strip rolling application

    • Derrez Mimoune
    • Mohamed Zaaf
    • Abdelaziz Amirat

    ORIGINAL ARTICLE 22 September 2022 Pages: 4165 - 4178

    

45. Study on preparation and stiffness of NiTi shape memory alloy/2A12 aluminum alloy laminated structure

    • Qi Cheng
    • Ning Guo
    • Jinlong He

    ORIGINAL ARTICLE 23 September 2022 Pages: 4179 - 4189

    

46. Study of the curling of tensile test specimens from the 6xxx aluminum alloy sheet

    • Yeong-Maw Hwang
    • Pao-Sung Chen

    ORIGINAL ARTICLE 23 September 2022 Pages: 4191 - 4200