1. Research progress of surface modification and solid–liquid lubrication synergistic friction reduction and wear resistance

   • Keyang Chen
   • Xuefeng Yang
   • Yalong Gao

   Critical Review 18 August 2022 Pages: 1115 - 1141

   

2. Incorporation of machine learning in additive manufacturing: a review

   • Ali Raza
   • Kashif Mairaj Deen
   • Waseem Haider

   Critical Review 20 August 2022 Pages: 1143 - 1166

   

3. Research progress on cutting machining simulation technology of metallic glasses

   • Wenbin He
   • Dingkun Wang
   • Jinguang Du

   Critical Review 23 August 2022 Pages: 1167 - 1193

   

4. A review of molecular dynamics simulation in studying surface generation mechanism in ultra-precision cutting

   • Junhong Han
   • Yanbing Chen
   • Haitao Wang

   Critical Review 25 August 2022 Pages: 1195 - 1231

   

5. Investigation into the role of cold atmospheric plasma on the precision grinding of RB-SiC ceramic at room temperature

   • Jiabin Xu
   • Xiaoshuang Rao
   • Feihu Zhang

   ORIGINAL ARTICLE 27 July 2022 Pages: 1233 - 1243

   

6. Conventionally and SLM-manufactured 18Ni300 steel: mechanical and tribological behaviour in dry sliding against PP40 composite

   • Daniel F. S. Ferreira
   • G. Miranda
   • José M. Oliveira

   ORIGINAL ARTICLE 19 August 2022 Pages: 1245 - 1258

   

7. A path planning method for surface damage repair using a robot-assisted laser cladding process

   • Hamdan Al-Musaibeli
   • Rafiq Ahmad

   ORIGINAL ARTICLE 19 August 2022 Pages: 1259 - 1279

   

8. Improvement of circular hole flanging height using multi-directional electromagnetic flanging

   • Ziqin Yan
   • Xiaohui Cui
   • Dongyang Qiu

   ORIGINAL ARTICLE 19 August 2022 Pages: 1281 - 1292

   

9. Milling force prediction and optimization of process parameters in micro-milling of glow discharge polymer

   • Ruiyang Guo
   • Mingjun Chen
   • Xingying Zhou

   ORIGINAL ARTICLE 19 August 2022 Pages: 1293 - 1310

   

10. Effect of an external magnetic field on micro-EDM milling of Inconel 718

    • Xiangyu Xu
    • Kan Wang
    • Yong Liu

    ORIGINAL ARTICLE 19 August 2022 Pages: 1311 - 1320

    

11. Online chatter monitor system based on rapid detection method and wireless communication

    • Xueyu Mei
    • Haoming Xu
    • Feng Feng

    ORIGINAL ARTICLE 20 August 2022 Pages: 1321 - 1337

    

12. Strategies for adjusting process parameters in CAE simulation to meet real injection molding condition of screw positions and cavity pressure curves

    • Bo-Wei Wang
    • Shih-Chih Nian
    • Ming-Shyan Huang

    ORIGINAL ARTICLE 20 August 2022 Pages: 1339 - 1351

    

13. Study on formation mechanism of serrated chip of Ti-6Al-4V titanium alloy based on shear slip theory

    • Xiaohua Zhu
    • Jiangmiao Shi
    • Xiao Zhao

    ORIGINAL ARTICLE 20 August 2022 Pages: 1353 - 1365

    

14. Numerical simulation of DC casting of large-size rare earth magnesium alloy ingot under low-frequency electromagnetic field

    • Zhongliang Zhou
    • Yiqiang Yang
    • Jianzhong Cui

    ORIGINAL ARTICLE 20 August 2022 Pages: 1367 - 1381

    

15. Investigation of new method of large ingots forging based on upsetting of workpieces with ledges

    • Oleg E. Markov
    • Anton S. Khvashchynskyi
    • Natalia S. Hrudkina

    ORIGINAL ARTICLE 20 August 2022 Pages: 1383 - 1394

    

16. Surface generation on titanium alloy through powder-mixed electric discharge machining with the focus on bioimplant applications

    • Muhammad Umar Farooq
    • Haider Ali Bhatti
    • Aqib Mashood Khan

    ORIGINAL ARTICLE Open access 22 August 2022 Pages: 1395 - 1411

    

17. Numerical investigation of surface textural dimples of titanium alloy subjected to laser shock processing

    • Zhenhua Zhang
    • Mengjin Liu
    • Xuesong Fu

    ORIGINAL ARTICLE 22 August 2022 Pages: 1413 - 1429

    

18. Chip wave phase difference analysis of robotic milling and chatter dominant mode research

    • Shihao Xin
    • Fangyu Peng
    • Jiawei Wu

    ORIGINAL ARTICLE 23 August 2022 Pages: 1431 - 1455

    

19. An approach to weld dissimilar polycarbonate and high-density polyethylene by friction stir spot welding

    • Andro Sidhom
    • Soheir Naga
    • Ahmed Kamal

    ORIGINAL ARTICLE Open access 23 August 2022 Pages: 1457 - 1466

    

20. Determination of local density in components made by fused deposition modeling through indentation test

    • Francesco Lambiase
    • Silvia Ilaria Scipioni
    • Alfonso Paoletti

    ORIGINAL ARTICLE Open access 23 August 2022 Pages: 1467 - 1478

    

21. Failure mode classification for condition-based maintenance in a bearing ring grinding machine

    • Muhammad Ahmer
    • Fredrik Sandin
    • Kim Berglund

    ORIGINAL ARTICLE Open access 23 August 2022 Pages: 1479 - 1495

    

22. How to find the variables causing outliers in a multivariate autocorrelated process control: a study in simulation and an extruder machine

    • Renan Mitsuo Ueda
    • Adriano Mendonça Souza

    ORIGINAL ARTICLE 23 August 2022 Pages: 1497 - 1511

    

23. The effect of ultrasonic amplitude on the performance of ultrasonic vibration-assisted EDM micro-hole machining

    • Peng Zhang
    • Zhen Yin
    • Kun Zhang

    ORIGINAL ARTICLE 23 August 2022 Pages: 1513 - 1524

    

24. A control method with considering error coupling in milling multi-feature thin-walled parts

    • Xiaoyan Zuo
    • Yin Zhou
    • Xiangyang Zhou

    ORIGINAL ARTICLE 23 August 2022 Pages: 1525 - 1537

    

25. Study on surface integrity and ductile cutting of PV polycrystalline silicon and wear mechanisms of electroplated diamond wire

    • Erick Cardoso Costa
    • Caroline Piesanti dos Santos
    • Fabio Antonio Xavier

    ORIGINAL ARTICLE 23 August 2022 Pages: 1539 - 1553

    

26. Study on the milling surface quality of 20% volume fraction SiCp/Al composites

    • Ke Zhang
    • Qi Gao
    • Xunyu Yin

    ORIGINAL ARTICLE 24 August 2022 Pages: 1555 - 1566

    

27. Influence of tool pin length and dissimilar material configuration on friction stir lap welding of Al and Mg alloys

    • Ming Zhai
    • ChuanSong Wu
    • Lei Shi

    ORIGINAL ARTICLE 24 August 2022 Pages: 1567 - 1582

    

28. Experimental investigation for multiresponse optimization in rotary ultrasonic side milling of quartz

    • Seong-Jun Choi
    • Choon-Man Lee
    • Dong-Hyeon Kim

    ORIGINAL ARTICLE 24 August 2022 Pages: 1583 - 1597

    

29. Study on coating morphology, property, and characteristics of in situ synthesis VC-reinforced Ni-based coatings by laser cladding

    • Jiayi Zeng
    • Guofu Lian
    • Lihong Huang

    ORIGINAL ARTICLE 24 August 2022 Pages: 1599 - 1615

    

30. Influence of sheet thickness on mechanical behaviors of the clinched joints produced by single-point butt clinching process

    • Xiaoqiang Ren
    • Zhengwu Zhou
    • Chao Chen

    ORIGINAL ARTICLE 24 August 2022 Pages: 1617 - 1627

    

31. Performance and increased fatigue life for a Ti workpiece produced by the EDM process

    • Zhi-Wei Liu
    • Chung-Wei Hsu
    • Chun-Yao Hsu

    ORIGINAL ARTICLE 24 August 2022 Pages: 1629 - 1639

    

32. Microstructure and corrosion behavior of friction-surfaced 304L austenitic stainless steels

    • Hemant Agiwal
    • Kumar Sridharan
    • Hwasung Yeom

    ORIGINAL ARTICLE 24 August 2022 Pages: 1641 - 1649

    

33. Generation mechanism of surface micro-texture in axial ultrasonic vibration-assisted milling (AUVAM)

    • Zongbo Zhang
    • Wengang Liu
    • Xin Jiang

    ORIGINAL ARTICLE 24 August 2022 Pages: 1651 - 1667

    

34. Optimization of the parameters of the selective laser sintering for the formation of PA12 samples by the Taguchi method

    • Zainab Faraj
    • Mohamed Aboussaleh
    • Rachid Kabiri

    ORIGINAL ARTICLE 24 August 2022 Pages: 1669 - 1677

    

35. Laser-based powder bed fusion of Ti-6Al-4V powder modified with SiO₂ nanoparticles

    • Nicole Emminghaus
    • Robert Bernhard
    • Stefan Kaierle

    ORIGINAL ARTICLE Open access 25 August 2022 Pages: 1679 - 1694

    

36. Modeling of oxide-film thickness in electrolytic in-process dressing grinding with workpiece swing

    • Zedong Liu
    • Chengzu Ren
    • Chunlei He

    ORIGINAL ARTICLE 25 August 2022 Pages: 1695 - 1718

    

37. A 3D printing tool-path generation strategy based on the partition of principal stress field for fused filament fabrication

    • Hang Zhang
    • Yuan Yao
    • Yunliang Jiang

    ORIGINAL ARTICLE 25 August 2022 Pages: 1719 - 1735

    

38. Characterization of the effects of high-intensity negative current pulses on metal transfer and melting rate in the AC-GMAW process

    • Álisson Fernandes Rosa
    • Luciano Machado Cirino
    • Régis Henrique Gonçalves e Silva

    ORIGINAL ARTICLE 26 August 2022 Pages: 1737 - 1746

    

39. Sensitivity analysis for springback of QSTE700 high-strength steel rectangular welded tube to material parameters in rotary draw bending

    • Yi Li
    • Yuli Liu
    • Hailong Liu

    ORIGINAL ARTICLE 26 August 2022 Pages: 1747 - 1762

    

40. The effect of process parameters on geometric deviations in 3D printing with fused deposition modelling

    • Cristian Cappellini
    • Yuri Borgianni
    • Chiara Nezzi

    ORIGINAL ARTICLE Open access 26 August 2022 Pages: 1763 - 1803

    

41. A new mandrel design with mandrel ball thickness variation for the bending process of aviation ultra-thin-walled tubes

    • Lanfang Jiang
    • Yaochen Lin
    • Min Sun

    ORIGINAL ARTICLE 26 August 2022 Pages: 1805 - 1819

    

42. Optimization of chip repose angle in dry hobbing machine considering minimum thermal accumulation on workbench

    • Bo Li
    • Xiao Yang
    • Lang He

    ORIGINAL ARTICLE 27 August 2022 Pages: 1821 - 1833

    

43. Tool vibration, surface roughness, cutting power, and productivity assessment using RSM and GRA approach during machining of Inconel 718 with PVD-coated carbide tool

    • Ilyas Kouahla
    • Mohamed Athmane Yallese
    • Mourad Nouioua

    ORIGINAL ARTICLE 27 August 2022 Pages: 1835 - 1856

    

44. Experimental and numerical study on the explosive welding of niobium-steel

    • Jian Wang
    • Xiao-jie Li
    • Yu-xin Wang

    ORIGINAL ARTICLE 30 August 2022 Pages: 1857 - 1867

    

45. Investigation on ultrasonic-assisted embossing process of micro-features with variable curvature as functional surface using ultra-thin sheet of 5052 aluminum alloy

    • Lidong Cheng
    • Chunju Wang
    • Haidong He

    ORIGINAL ARTICLE 30 August 2022 Pages: 1869 - 1882

    

46. Influence and prediction of tool wear on workpiece surface roughness based on milling topography analysis

    • Lei Zhang
    • Minli Zheng
    • Kangning Li

    ORIGINAL ARTICLE 30 August 2022 Pages: 1883 - 1896

    

47. Ultrasonic and electrical discharge–assisted milling of the Ti-6Al-4 V alloy

    • Moran Xu
    • Changping Li
    • Tae Jo Ko

    ORIGINAL ARTICLE 30 August 2022 Pages: 1897 - 1917

    

48. Surface quality study of AZ31B Mg alloy in electric pules-ultrasonic assisted incremental sheet forming

    • Zimo Song
    • Haoran Zhang
    • Jun Gao

    ORIGINAL ARTICLE 30 August 2022 Pages: 1919 - 1932

    

49. High efficiency and precision approach to milling stability prediction based on predictor-corrector linear multi-step method

    • Guohua Qin
    • Weida Lou
    • Zhuxi Wu

    ORIGINAL ARTICLE 30 August 2022 Pages: 1933 - 1955

    

50. Allocation of geometric tolerances in one-dimensional stackup problems

    • Antonio Armillotta

    ORIGINAL ARTICLE Open access 30 August 2022 Pages: 1957 - 1973