1. High-precision position control of belt drive system based on OPC communication

   • Wei Liu
   • Ping Wan
   • Cheng Jing

   ORIGINAL ARTICLE 20 August 2021 Pages: 1 - 10

   

2. Studying on the design of automobile constant velocity universal joint based on mass customization

   • Yujun Lu
   • Wei Wang
   • Zhichang Zhao

   ORIGINAL ARTICLE 31 August 2021 Pages: 11 - 25

   

3. A method for intelligently optimizing hierarchical assembly structure sequences by assembly hybrid G-diagram

   • Xiaoxi Kou
   • Yan Cao
   • Hu Qiao

   ORIGINAL ARTICLE 02 September 2021 Pages: 27 - 39

   

4. Road rut detection system with embedded multi-channel laser sensor

   • Jin Han
   • Likun Cui
   • Shaoning Shi

   ORIGINAL ARTICLE 15 October 2021 Pages: 41 - 50

   

5. DCI-NACC: flow scheduling and congestion control based on programmable data plane in high-performance data center networks

   • Junjie Geng

   ORIGINAL ARTICLE 13 January 2022 Pages: 51 - 63

   

6. Ladle intelligent re-scheduling method in steelmaking–refining–continuous casting production process based on BP neural network working condition estimation

   • Wei Liu
   • Xinfu Pang
   • Liangliang Sun

   ORIGINAL ARTICLE 20 January 2022 Pages: 65 - 85

   

7. Novel monitoring method for belt wear state based on machine vision and image processing under grinding parameter variation

   • Nina Wang
   • Guangpeng Zhang
   • Yongchang Li

   ORIGINAL ARTICLE 22 January 2022 Pages: 87 - 101

   

8. Correction to: Novel monitoring method for belt wear state based on machine vision and image processing under grinding parameter variation

   • Nina Wang
   • Guangpeng Zhang
   • Yongchang Li

   Correction 02 February 2022 Pages: 103 - 104

   

9. Development of a nozzle capillary viscometer for inline viscosity measurement of thermoplastics

   • Peter Wappler
   • Tim Horter
   • André Zimmermann

   ORIGINAL ARTICLE Open access 25 January 2022 Pages: 105 - 116

   

10. Gesture- and vision-based automatic grasping and flexible placement in teleoperation

    • Zhao Xue
    • Xiaoan Chen
    • Shengli Tian

    ORIGINAL ARTICLE 02 February 2022 Pages: 117 - 132

    

11. An energy-concentrated synchrosqueezing transform using a reassignment operator for the analysis of nonstationary signals

    • Changsong Li

    ORIGINAL ARTICLE 08 February 2022 Pages: 133 - 146

    

12. Fabrication and characterization of resistance temperature detector by smart mask design

    • Ramazan Lok
    • Huseyın Karacali
    • Ercan Yilmaz

    ORIGINAL ARTICLE 18 March 2022 Pages: 147 - 158

    

13. Investigation on mechanism of ultrasonic welding AZ31B/5052 joint with laser texturing on mental surface

    • Cailing Wang
    • Yanfeng Xing
    • Sheng Zeng

    ORIGINAL ARTICLE 18 April 2022 Pages: 159 - 171

    

14. DPDSN: data plane deadline-sensitive scheduling in data center networks

    • Junjie Geng

    ORIGINAL ARTICLE 21 April 2022 Pages: 173 - 183

    

15. Anomaly credit data detection based on enhanced Isolation Forest

    • Xiaodong Zhang
    • Yuan Yao
    • Tao Wang

    ORIGINAL ARTICLE 26 April 2022 Pages: 185 - 192

    

16. Theoretical analysis and experimental research on the pressing force of robot drilling CFRP sheet

    • Pengqiang Fu
    • Yan Wang
    • Sisi Yang

    ORIGINAL ARTICLE 02 May 2022 Pages: 193 - 208

    

17. Dynamic performance analysis and optimization of pulp-molding machine frames

    • Junbin Lou
    • Yaping Gong

    ORIGINAL ARTICLE 07 May 2022 Pages: 209 - 217

    

18. Surface roughness prediction and process parameter optimization of Ti-6Al-4 V by magnetic abrasive finishing

    • Zhuang Song
    • Yugang Zhao
    • Yueming Deng

    ORIGINAL ARTICLE 21 May 2022 Pages: 219 - 233

    

19. Visual odometry algorithm based on geometric prior for dynamic environments

    • Gang Xu
    • Ze Yu
    • Feng Pan

    ORIGINAL ARTICLE Open access 25 May 2022 Pages: 235 - 242

    

20. Numerical and experimental research on warm cross wedge rolling of hollow shafts with corrugated surface

    • Jiaai Shi
    • Jinping Liu
    • Jinxia Shen

    ORIGINAL ARTICLE 28 May 2022 Pages: 243 - 262

    

21. Concurrent layout and trajectory optimization for robot workcell toward energy-efficient and collision-free automation

    • Binquan Qiu
    • Silu Chen
    • Guilin Yang

    ORIGINAL ARTICLE 02 June 2022 Pages: 263 - 275

    

22. Correction to: Concurrent layout and trajectory optimization for robot workcell toward energy‑efficient and collision‑free automation

    • Binquan Qiu
    • Silu Chen
    • Guilin Yang

    Correction 16 June 2022 Pages: 277 - 278

    

23. An integrated scheduling method for personalized products with no-wait constraints

    • Zhang Xiaowei
    • Xie Zhiqiang
    • Xia Yingchun

    ORIGINAL ARTICLE 03 June 2022 Pages: 279 - 290

    

24. Modeling and analysis of fatigue detection with multi-channel data fusion

    • Wenbo Huang
    • Changyuan Wang
    • Li Wang

    ORIGINAL ARTICLE 07 June 2022 Pages: 291 - 301

    

25. Numerical and experimental analysis of electrohydraulic forming of Al 5052 and Al 6061 using conical die

    • Ramesh Kumar
    • Sunil K. Matwa
    • Sachin D. Kore

    ORIGINAL ARTICLE 17 June 2022 Pages: 303 - 325

    

26. Influence of raw material surface roughening on the lap shearing strength and failure behavior of adhesively bonded aluminum joints

    • Jianpeng Liu
    • Wei Wang
    • Luoxing Li

    ORIGINAL ARTICLE 30 June 2022 Pages: 327 - 342

    

27. Accurate vibration-free robotic milling electric discharge machining

    • Sergio Almeida
    • John Mo
    • Songlin Ding

    ORIGINAL ARTICLE Open access 18 July 2022 Pages: 343 - 363

    

28. Study on the hot stamping simulation and experiment of A-pillar patchwork blanks

    • Zhiqiang Zhang
    • Xiao Ouyang
    • Lijuan Zhu

    ORIGINAL ARTICLE 18 July 2022 Pages: 365 - 376

    

29. Dynamic simulation and experimental study of cutting force by rake angle of multi-axis high-speed ball-end milling tool

    • Zhijie Wang
    • Yan Cao
    • Fan Kou

    ORIGINAL ARTICLE 19 July 2022 Pages: 377 - 390

    

30. A systematic method for automated manufacturability analysis of machining parts

    • Tongming Xu
    • Junli Xue
    • Xuerui Jiao

    ORIGINAL ARTICLE 20 July 2022 Pages: 391 - 407

    

31. Correction to: A systematic method for automated manufacturability analysis of machining parts

    • Tongming Xu
    • Junli Xue
    • Xuerui Jiao

    Correction 11 August 2022 Pages: 409 - 409

32. Robotic simple and fast drilling system for automated aircraft assembly

    • Lixin Zhang
    • Wenxiang Gao
    • Mutian Tang

    ORIGINAL ARTICLE 23 July 2022 Pages: 411 - 426

    

33. Enterprise service composition in IIoT manufacturing: integer linear optimization based on the hybrid multi-objective grey wolf optimizer

    • Alireza Safaei
    • Ramin Nassiri
    • Amir Masoud Rahmani

    ORIGINAL ARTICLE 28 July 2022 Pages: 427 - 445

    

34. Point cloud model simplification method for ring forgings based on single median error metric

    • YuCun Zhang
    • JinLei Cheng
    • Fang Yan

    ORIGINAL ARTICLE 12 August 2022 Pages: 447 - 459

    

35. Structural design and kinematic analysis of a welding robot for liquefied natural gas membrane tank automatic welding

    • Jiang Yi
    • Han Qingqing
    • Hua Chunjian

    ORIGINAL ARTICLE 19 August 2022 Pages: 461 - 474

    

36. Data aggregation algorithm based on clustering for wireless sensor networks

    • Shuang Zhai
    • Xinyu Yang
    • Xingang Guo

    ORIGINAL ARTICLE 25 August 2022 Pages: 475 - 484

    

37. Study on the edge defects of high volume fraction 70% SiCp/Al composites in ultrasonic-assisted milling

    • Peicheng Peng
    • Daohui Xiang
    • Guofu Gao

    Application 30 January 2022 Pages: 485 - 498

    

38. A comparative study on surface topography and microhardness of laser polished-hardened AISI D2 tool steel

    • Zuofa Liu
    • Jie Zhou
    • Yongliang Li

    Application 18 June 2022 Pages: 499 - 512