1. Formation mechanism and detection and evaluation methods as well as repair technology of crack damage in fiber-reinforced composite wind turbine blade: a review

   • Zheng Cao
   • Shujian Li
   • Tae Jo Ko

   Critical Review 20 April 2022 Pages: 5649 - 5672

   

2. Influence of the key process parameters in hydrodynamic deep drawing utilizing a combined floating and static die cavity

   • Huiting Wang
   • Jianfei Kong
   • Xiaohui Shen

   ORIGINAL ARTICLE 01 April 2022 Pages: 5673 - 5685

   

3. Investigation of line-shaped CO₂ laser annealing on InN/AlN/sapphire substrates

   • Shih-Feng Tseng
   • Chun-Jen Wang
   • Wei-Chun Chen

   ORIGINAL ARTICLE 01 April 2022 Pages: 5687 - 5696

   

4. An efficient trans-scale and multi-stage approach for the deformation analysis of large-sized thin-walled composite structure in aircraft assembly

   • Chinan Liu
   • Hui Cheng
   • Bin Luo

   ORIGINAL ARTICLE 02 April 2022 Pages: 5697 - 5713

   

5. Servo control for super-high-thickness cutting in high-speed wire electrical discharge machining

   • Cong Deng
   • Zhidong Liu
   • Mingbo Qiu

   ORIGINAL ARTICLE 02 April 2022 Pages: 5715 - 5724

   

6. An intelligent manufacturing cell based on human–robot collaboration of frequent task learning for flexible manufacturing

   • Shuai Zhang
   • Shiqi Li
   • Xiao Li

   ORIGINAL ARTICLE 02 April 2022 Pages: 5725 - 5740

   

7. Experimental validation and numerical simulation of flexible and microscale roll gap control technology

   • Tingsong Yang
   • Qifa Chen
   • Fengshan Du

   ORIGINAL ARTICLE 02 April 2022 Pages: 5741 - 5754

   

8. Material removal thickness: a universal factor determining the evolution of surface roughness in electrochemical polishing

   • Jianwei Ji
   • Muhammad Ajmal Khan
   • Hui Deng

   ORIGINAL ARTICLE 02 April 2022 Pages: 5755 - 5762

   

9. Effect of ultrasonic compound cutting on the microstructure and properties of formed chip

   • Haimeng Sun
   • Feng Jiao
   • Zhuangfei Wang

   ORIGINAL ARTICLE 02 April 2022 Pages: 5763 - 5775

   

10. Towards ubiquitous data access service of 3D part library in cloud scheme with host independence

    • Wei Liu
    • Chuipin Kong
    • Xionghui Zhou

    ORIGINAL ARTICLE 02 April 2022 Pages: 5777 - 5791

    

11. Effect of grain size on subsurface characterization of pure iron subjected to orthogonal cutting

    • Xiuxuan Yang
    • Bi Zhang
    • Jingang Tang

    ORIGINAL ARTICLE 03 April 2022 Pages: 5793 - 5806

    

12. Design and experimental research of dynamic magnetic field device based on Halbach array in magnetorheological polishing

    • Mingli Xie
    • Zijun An
    • Jin Zhuang

    ORIGINAL ARTICLE 04 April 2022 Pages: 5807 - 5822

    

13. Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cutting Inconel 718

    • Qingan Yin
    • Zhanqiang Liu
    • Xichun Luo

    ORIGINAL ARTICLE 04 April 2022 Pages: 5823 - 5833

    

14. Statistical supervised learning with engineering data: a case study of low frequency noise measured on semiconductor devices

    • María Luz Gámiz
    • Anton Kalén
    • Rocío Raya-Miranda

    ORIGINAL ARTICLE Open access 04 April 2022 Pages: 5835 - 5853

    

15. Aspheric lens processing of chalcogenide glass via combined PGM-SPDT process

    • Tianfeng Zhou
    • Chi Zhang
    • Xibin Wang

    ORIGINAL ARTICLE 04 April 2022 Pages: 5855 - 5864

    

16. Thickness prediction of thin strip cold rolling based on VBGM-RBF

    • Yue Huang
    • Xiaomin Zhou
    • Zhiying Gao

    ORIGINAL ARTICLE 04 April 2022 Pages: 5865 - 5884

    

17. Cutting force and nonlinear chatter stability of ball-end milling cutter

    • Ce Zhang
    • Changyou Li
    • Weibing Dai

    ORIGINAL ARTICLE 04 April 2022 Pages: 5885 - 5908

    

18. Accurate and robust sub-pixel refinement for fillet weld joint based on directional maximum projection

    • Shengfeng Chen
    • Bing Chen
    • Jian Liu

    ORIGINAL ARTICLE 04 April 2022 Pages: 5909 - 5920

    

19. Design of a novel integrated ultrasonic tool holder for friction stir welding

    • Ju Jianzhong
    • Long Zhili
    • Zhao Heng

    ORIGINAL ARTICLE 04 April 2022 Pages: 5921 - 5932

    

20. Influence of variable loading path pattern on deformation and grain size in large-scale electric upsetting process of Nimonic superalloy

    • Yu-qing Zhang
    • Guo-zheng Quan
    • Wei Xiong

    ORIGINAL ARTICLE 04 April 2022 Pages: 5933 - 5954

    

21. Deep learning-based optimization using a limited number of experiments for roll-to-roll UV embossing

    • Meng-Ting Wu
    • Ming-You Wu
    • Cheng-Hsien Wu

    ORIGINAL ARTICLE 04 April 2022 Pages: 5955 - 5967

    

22. Cracking behavior and prediction criterion of spray-deposited 2195 Al–Li alloy extrusion profile

    • Yongxiao Wang
    • Guoqun Zhao
    • Xiao Xu

    ORIGINAL ARTICLE 04 April 2022 Pages: 5969 - 5984

    

23. Multi-directional forging of large-scale Mg-9Gd-3Y-2Zn-0.5Zr alloy guided by 3D processing maps and finite element analysis

    • Jiyu Li
    • Shuai Dong
    • Jie Dong

    ORIGINAL ARTICLE 04 April 2022 Pages: 5985 - 5996

    

24. Adaptive image enhancement and dynamic-template-matching-based edge extraction method for diamond roller on-machine profile measurement

    • Jing Li
    • Yushun Lu
    • Zehui Ma

    ORIGINAL ARTICLE 05 April 2022 Pages: 5997 - 6010

    

25. A marker-less monocular vision point positioning method for industrial manual operation environments

    • Junhao Geng
    • Xinyang Zhao
    • Yongsheng Ma

    ORIGINAL ARTICLE 05 April 2022 Pages: 6011 - 6027

    

26. The study of CFRP variable feed drilling method based on sinusoidal curve

    • Wang Shuaipu
    • Liang Jie

    ORIGINAL ARTICLE 05 April 2022 Pages: 6029 - 6039

    

27. The influence of powder size on the microstructure and properties of Mo₂FeB₂ coating fabricated via laser cladding with pre-placed powder

    • Hao Zhang
    • Guofu Lian
    • Deqing Ke

    ORIGINAL ARTICLE 05 April 2022 Pages: 6041 - 6052

    

28. Displacement difference feedback control of chatter in milling processes

    • Denghui Li
    • Hongrui Cao
    • Xuefeng Chen

    ORIGINAL ARTICLE 05 April 2022 Pages: 6053 - 6066

    

29. Calculation and analysis of quasi-dynamic cutting force and specific cutting energy in micro-milling Ti6Al4V

    • Yabo Zhang
    • Qingshun Bai
    • Peng Wang

    ORIGINAL ARTICLE 05 April 2022 Pages: 6067 - 6078

    

30. Process limits in high-performance peel grinding of hardened steel components with coarse CBN grinding wheels

    • Berend Denkena
    • Alexander Kroedel
    • Michael Wilckens

    ORIGINAL ARTICLE Open access 05 April 2022 Pages: 6079 - 6090

    

31. Physical mechanism of laser-excited acoustic wave and its application in recognition of incomplete-penetration welding defect

    • Yuhua Cai
    • Yi Luo
    • Yanrui Peng

    ORIGINAL ARTICLE 05 April 2022 Pages: 6091 - 6105

    

32. New phenomenological model for comparison of lasers with different temporal outputs

    • Julio Coroado
    • Stewart Williams
    • Goncalo Pardal

    ORIGINAL ARTICLE Open access 06 April 2022 Pages: 6107 - 6123

    

33. Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel

    • Mohd Danish
    • Md Al-Amin
    • Mehmet Bayram Yildirim

    ORIGINAL ARTICLE 06 April 2022 Pages: 6125 - 6141

    

34. Deep learning-based automatic optical inspection system empowered by online multivariate autocorrelated process control

    • Kung-Jeng Wang
    • Luh Juni Asrini

    ORIGINAL ARTICLE 06 April 2022 Pages: 6143 - 6162

    

35. Welding parameters optimization during plunging and dwelling phase of FSW 2219 aluminum alloy thick plate

    • Xiaohong Lu
    • Jinhui Qiao
    • Steven Y. Liang

    ORIGINAL ARTICLE 06 April 2022 Pages: 6163 - 6173

    

36. Online grinding chatter detection based on minimum entropy deconvolution and autocorrelation function

    • Dan He
    • Zexing Ni
    • Xiufeng Wang

    ORIGINAL ARTICLE 06 April 2022 Pages: 6175 - 6185

    

37. Combined effect of powder properties and process parameters on the density of 316L stainless steel obtained by laser powder bed fusion

    • Sabrine Ziri
    • Anis Hor
    • Catherine Mabru

    ORIGINAL ARTICLE 06 April 2022 Pages: 6187 - 6204

    

38. Microstructural and mechanical aspects of AlSi7Mg0.6 alloy related to scanning strategies in L-PBF

    • Pinku Yadav
    • Olivier Rigo
    • Eric Lacoste

    ORIGINAL ARTICLE 06 April 2022 Pages: 6205 - 6223

    

39. Multi-objective modelling and optimal parameter selection of a multi-pass milling process considering uncertain milling stability constraint

    • Congying Deng
    • Jie Shu
    • Jianguo Miao

    ORIGINAL ARTICLE 06 April 2022 Pages: 6225 - 6240

    

40. Effects of voids and raster orientations on fatigue life of notched additively manufactured PLA components

    • Soran Hassanifard
    • Kamran Behdinan

    ORIGINAL ARTICLE 07 April 2022 Pages: 6241 - 6250

    

41. Surface flatness and roughness of diamond wire electrical discharge sawing mono-crystalline silicon with improved bath cooling

    • Jian Qiu
    • Xiaofei Li
    • Shanbao Zhang

    ORIGINAL ARTICLE 07 April 2022 Pages: 6251 - 6267

    

42. An extendable framework for intelligent and easily configurable skills-based industrial robot applications

    • Lisa Heuss
    • Clemens Gonnermann
    • Gunther Reinhart

    ORIGINAL ARTICLE Open access 07 April 2022 Pages: 6269 - 6285

    

43. Surface roughness prediction in robotic belt grinding based on the undeformed chip thickness model and GRNN method

    • Zhijian Tao
    • Shan Li
    • Dinghua Zhang

    ORIGINAL ARTICLE 07 April 2022 Pages: 6287 - 6299

    

44. Evaluation on forming process of AZ31 alloy complex curved surfaces by clustering balls spinning method

    • Zhiqing Hu
    • Lijia Da
    • Jia Xi

    ORIGINAL ARTICLE 07 April 2022 Pages: 6301 - 6313

    

45. Microstructure and mechanical properties of Al/Mg resistance element welded joints

    • Bofang Zheng
    • Yang Li
    • Zhen Luo

    ORIGINAL ARTICLE 07 April 2022 Pages: 6315 - 6323

    

46. Advanced metal transfer additive manufacturing of high temperature turbine blades

    • Daniel Thomas
    • Andy Gleadall

    ORIGINAL ARTICLE 08 April 2022 Pages: 6325 - 6335

    

47. Microstructure and mechanical performance of flat resistance element welded aluminum alloy/Q235 steel joints

    • Liangyu Fei
    • Shengdun Zhao
    • Hao Zhou

    ORIGINAL ARTICLE 08 April 2022 Pages: 6337 - 6349

    

48. Correction to: Microstructure and mechanical performance of flat resistance element welded aluminum alloy/Q235 steel joints

    • Liangyu Fei
    • Shengdun Zhao
    • Hao Zhou

    Correction 20 April 2022 Pages: 6351 - 6351

49. Study of the mathematical modelling of interface temperature in turning by equivalent thermal conductivity

    • Bruna Aparecida Rezende
    • Frederico de Castro Magalhães
    • Juan Carlos Campos Rubio

    ORIGINAL ARTICLE 09 April 2022 Pages: 6353 - 6364

    

50. Multi-step hydroforming process and wall thickness optimization of 5A02 aluminum alloy five-way tube with different branch diameters

    • Liming Wei
    • Xuefeng Xu
    • Congcong Yuan

    ORIGINAL ARTICLE 11 April 2022 Pages: 6365 - 6375