1. Heat flux in machining processes: a review

   • Alisson A A Figueiredo
   • Gilmar Guimaraes
   • Igor Cezar Pereira

   Critical Review 05 March 2022 Pages: 2827 - 2848

   

2. Cutting temperature measurement and prediction in machining processes: comprehensive review and future perspectives

   • Bruno Miguel Pereira Guimarães
   • Cristina Maria da Silva Fernandes
   • Maria Georgina Macedo Miranda

   Critical Review 10 March 2022 Pages: 2849 - 2878

   

3. Traditional and non-traditional machining technology of metallic glass

   • Jinguang Du
   • Biao Tian
   • Wenbin He

   Critical Review 11 March 2022 Pages: 2879 - 2902

   

4. The key technologies of machining process design: a review

   • Xiaojian Wen
   • Jinfeng Liu
   • Lei Dong

   Critical Review 12 March 2022 Pages: 2903 - 2921

   

5. Effect of chamfer width and chamfer angle on tool wear in slot milling

   • Kourosh Tatar
   • Inge Svenningsson

   ORIGINAL ARTICLE Open access 11 January 2022 Pages: 2923 - 2935

   

6. Environmental and economic sustainability assessment of an industry 4.0 application: the AGV implementation in a food industry

   • Roberta Stefanini
   • Giuseppe Vignali

   ORIGINAL ARTICLE 24 February 2022 Pages: 2937 - 2959

   

7. Tool wear prediction at different cutting edge locations for ball-end cutter in milling of Ni-based superalloy freeform surface part

   • Zhuang Mao
   • Ming Luo
   • Dinghua Zhang

   ORIGINAL ARTICLE 28 February 2022 Pages: 2961 - 2977

   

8. An improved algorithm to predict the pose-dependent cutting stability in robot milling

   • Long Wu
   • Guofeng Wang
   • Tian Huang

   ORIGINAL ARTICLE 28 February 2022 Pages: 2979 - 2991

   

9. Enhancement of micro milling performance by abrasion-resistant coated tools with optimized thin-film thickness: analytical and experimental characterization

   • Priyabrata Sahoo
   • Karali Patra
   • Danil Yu Pimenov

   ORIGINAL ARTICLE 28 February 2022 Pages: 2993 - 3015

   

10. A 3D analytical modeling method for keyhole porosity prediction in laser powder bed fusion

    • Wenjia Wang
    • Steven Y. Liang

    ORIGINAL ARTICLE 28 February 2022 Pages: 3017 - 3025

    

11. Antecedents and enablers of supply chain reconfigurability and their effects on performance

    • Slim Zidi
    • Nadia Hamani
    • Lyes Kermad

    ORIGINAL ARTICLE 01 March 2022 Pages: 3027 - 3043

    

12. Generating Profiled Diamond Grinding Wheels by 2000 W Fiber Laser: On The Understanding of Laser Ablation Law with High Power and Establishment of a Predictive Model

    • Adam George Antrum Rushworth
    • Ke Ge Xie
    • Xiang Yu Zhang

    ORIGINAL ARTICLE 01 March 2022 Pages: 3045 - 3063

    

13. Numerical simulation of the mold filling process and its experimental validation

    • Markus Baum
    • Fabian Jasser
    • Simone Lake

    ORIGINAL ARTICLE Open access 01 March 2022 Pages: 3065 - 3076

    

14. Turning of Inconel 718 using liquid nitrogen: multi-objective optimization of cutting parameters using RSM

    • Behzad Eskandari
    • Sukanta Bhowmick
    • Ahmet T. Alpas

    ORIGINAL ARTICLE 01 March 2022 Pages: 3077 - 3101

    

15. Assembly accuracy prediction and optimization of aero-engine rotor under the separation condition of assembly and measurement

    • Minghua Li
    • Yunlong Wang
    • Xiaokai Mu

    ORIGINAL ARTICLE 01 March 2022 Pages: 3103 - 3112

    

16. Forming dependence on spin roller paths for thin-walled complex components from 2195 Al-Li alloy TWBs

    • Hongrui Zhang
    • Mei Zhan
    • Yudong Lei

    ORIGINAL ARTICLE 01 March 2022 Pages: 3113 - 3122

    

17. A machine learning approach for the prediction of melting efficiency in wire arc additive manufacturing

    • Germán O. Barrionuevo
    • Pedro M. Sequeira-Almeida
    • Stewart W. Williams

    ORIGINAL ARTICLE 02 March 2022 Pages: 3123 - 3133

    

18. Development of human–robot cooperation for assembly using image processing techniques

    • Anh-Tuan Dang
    • Quang-Cherng Hsu
    • Yu-Sin Jhou

    ORIGINAL ARTICLE 02 March 2022 Pages: 3135 - 3154

    

19. An intrinsic parameter calibration method for R-LAT system based on CMM

    • Wenjun Su
    • Junkang Guo
    • Kang Jia

    ORIGINAL ARTICLE 02 March 2022 Pages: 3155 - 3165

    

20. Novel design concept for shrink-fitted bimetallic sleeve roll in hot rolling mill

    • Rahimah Abdul Rafar
    • Nao-Aki Noda
    • Yasushi Takase

    ORIGINAL ARTICLE 02 March 2022 Pages: 3167 - 3180

    

21. Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement

    • Muhammad Syamil Zakaria
    • Mazli Mustapha
    • Norshah Aizat Shuaib

    ORIGINAL ARTICLE 02 March 2022 Pages: 3181 - 3200

    

22. Research on modeling of grinding force in ultrasonic vibration–assisted grinding of 304 stainless steel materials

    • Zhenyu Yang
    • Ping Zou
    • Xue Wang

    ORIGINAL ARTICLE 02 March 2022 Pages: 3201 - 3223

    

23. Tribocorrosion behavior of bare and nanocoated foils used on high-speed air-foil bearings

    • Khotso Khoele
    • Onoyivwe Monday Ama
    • David Jacobus Delport

    ORIGINAL ARTICLE 02 March 2022 Pages: 3225 - 3235

    

24. Z-map based cutting force prediction for elliptical ultrasonic vibration-assisted milling process

    • Zhongqun Li
    • Jiandong Xiao
    • Weifeng Zhang

    ORIGINAL ARTICLE 03 March 2022 Pages: 3237 - 3249

    

25. Effect of ball size and impact velocity on the microstructure and hardness of surface mechanical attrition–treated 304L steel: experiment and finite element simulations

    • Vikesh Kumar
    • Anurag Sharma
    • Indrasen Singh

    ORIGINAL ARTICLE 03 March 2022 Pages: 3251 - 3267

    

26. A coupled multiphase Lagrangian-Eulerian fluid-dynamics framework for numerical simulation of Laser Metal Deposition process

    • Mauro Murer
    • Giovanni Formica
    • Ferdinando Auricchio

    ORIGINAL ARTICLE Open access 03 March 2022 Pages: 3269 - 3286

    

27. Study on double-sided impedance matching of spherical focusing transducer in ultrasonic abrasive flow polishing system

    • Li Wei
    • Hua Li
    • Dong Wei

    ORIGINAL ARTICLE 03 March 2022 Pages: 3287 - 3297

    

28. A novel non-collision path planning strategy for multi-manipulator cooperative manufacturing systems

    • Chang Su
    • Jianfeng Xu

    ORIGINAL ARTICLE 03 March 2022 Pages: 3299 - 3324

    

29. A two-nozzle cable-driven parallel robot for 3D printing building construction: path optimization and vibration analysis

    • Sy Nguyen-Van
    • Kwan-Woong Gwak

    ORIGINAL ARTICLE 03 March 2022 Pages: 3325 - 3338

    

30. Experimental investigations on the influence of discharge current waveform on processing characteristics and surface integrity in electrical discharge machining

    • Guisen Wang
    • Fuzhu Han
    • Liang Zhu

    ORIGINAL ARTICLE 03 March 2022 Pages: 3339 - 3351

    

31. Improving the quality of a circular cooling channel fabrication by fused filament fabrication using Taguchi methods

    • Chil-Chyuan Kuo
    • Qing-Zhou Tasi
    • Shao-Xuan Qiu

    ORIGINAL ARTICLE 04 March 2022 Pages: 3353 - 3364

    

32. Experimental study of the dynamic behaviour of loaded polyurethane foam free fall investigation and evaluation of microstructure

    • Noureddine Boumdouha
    • Zitouni Safidine
    • Jean-François Gerard

    ORIGINAL ARTICLE 04 March 2022 Pages: 3365 - 3381

    

33. Gradient structure and mechanical behavior induced by multiple laser peening in 304 austenitic stainless steel

    • Yaofei Sun
    • Zhibao Hou
    • Yongxiang Hu

    ORIGINAL ARTICLE 04 March 2022 Pages: 3383 - 3392

    

34. Numerical calculation of grinding wheel wear for spiral groove grinding

    • Xianli Liu
    • Shipeng Wang
    • Steven Y. Liang

    ORIGINAL ARTICLE 04 March 2022 Pages: 3393 - 3404

    

35. Defect prediction for assembled products: a novel model based on the structural complexity paradigm

    • Elisa Verna
    • Gianfranco Genta
    • Fiorenzo Franceschini

    ORIGINAL ARTICLE Open access 04 March 2022 Pages: 3405 - 3426

    

36. Statistical analysis of manufacturing system complexity

    • Germán Herrera Vidal
    • Jairo R. Coronado Hernández
    • Pablo Schwarzenberg

    ORIGINAL ARTICLE 04 March 2022 Pages: 3427 - 3436

    

37. Optimization of tool geometric parameters for a small fluteless forming tap (FFT)

    • Ming-Chang Wu
    • Wei-Rong Jian
    • Chung-Chen Tsao

    ORIGINAL ARTICLE 04 March 2022 Pages: 3437 - 3449

    

38. An on-line contour error estimation and compensation strategy for five-axis local smoothed trajectory under motion time synchronization

    • Yang Jiang
    • Jiang Han
    • Tingjiang Tao

    ORIGINAL ARTICLE 04 March 2022 Pages: 3451 - 3469

    

39. A comprehensive investigation of abrasive barrel finishing on hardness and manufacturability of laser-based powder bed fusion hollow components

    • Mahyar Khorasani
    • Amir Hossein Ghasemi
    • Bernard Rolfe

    ORIGINAL ARTICLE Open access 04 March 2022 Pages: 3471 - 3490

    

40. Increased sheet-forming capability via controlling in-plane stress state of the sheet metal using hetero-structured flexible dies

    • Nan Xiang
    • Tao Huang
    • Fu-xiao Chen

    ORIGINAL ARTICLE 04 March 2022 Pages: 3491 - 3506

    

41. Accurate temperature characterization and experimental verification in the PCB drilling process

    • Hongyan Shi
    • Zhuangpei Chen
    • Tao Zhu

    ORIGINAL ARTICLE 05 March 2022 Pages: 3507 - 3518

    

42. A mechanistic model for prediction of exit-chipping width in rotary ultrasonic drilling of sapphire

    • Dongxi Lv
    • Dong Liu
    • Yingdan Zhu

    ORIGINAL ARTICLE 05 March 2022 Pages: 3519 - 3527

    

43. The compressive response of additively-manufactured hollow truss lattices: an experimental investigation

    • Claudio Intrigila
    • Nicola A. Nodargi
    • Paolo Bisegna

    ORIGINAL ARTICLE Open access 06 March 2022 Pages: 3529 - 3541

    

44. Influence of different micro-pattern types on interface characteristic and mechanical property of CFRTP/aluminum alloy laser bonding joint

    • Feiyun Wang
    • Hengchang Bu
    • Xiaohong Zhan

    ORIGINAL ARTICLE 06 March 2022 Pages: 3543 - 3557

    

45. A machine learning–based methodology for identification of the plastic flow in aluminum sheets during incremental sheet forming processes

    • Quoc Tuan Pham
    • Hai Son Le
    • Xuan Van Tran

    ORIGINAL ARTICLE 07 March 2022 Pages: 3559 - 3584

    

46. Failure analysis and pressure online monitoring system design of casting die ejector rod based on eigenvalue buckling theory

    • Wenhang Dong
    • Xuechang Zhang
    • Wendi Zhou

    ORIGINAL ARTICLE 07 March 2022 Pages: 3585 - 3597

    

47. Monitoring of casting quality using principal component analysis and self-organizing map

    • Hocine Bendjama
    • Salah Bouhouche
    • Jürgen Bast

    ORIGINAL ARTICLE 07 March 2022 Pages: 3599 - 3607

    

48. A data-driven minimum stiffness prediction method for machining regions of aircraft structural parts

    • Jiarui Chen
    • Yingguang Li
    • Tianchi Deng

    ORIGINAL ARTICLE 07 March 2022 Pages: 3609 - 3623

    

49. Linear programming feedrate optimization

    • Petr Petráček
    • Bořivoj Vlk
    • Jiří Švéda

    ORIGINAL ARTICLE Open access 07 March 2022 Pages: 3625 - 3646

    

50. Improving Navigation Stack of a ROS-Enabled Industrial Autonomous Mobile Robot (AMR) to be Incorporated in a Large-Scale Automotive Production

    • Ismail Hakki Savci
    • Abdurrahman Yilmaz
    • Hakan Temeltas

    ORIGINAL ARTICLE 07 March 2022 Pages: 3647 - 3668