1. A short review on the influence of mechanical machining on tribological and wear behavior of components

   • Weijie Kuang
   • Qing Miao
   • Haonan Li

   Critical Review 14 February 2022 Pages: 1401 - 1413

   

2. Sol–gel polishing technology for extremely hard semiconductor substrates

   • Qiufa Luo
   • Hailang Wen
   • Jing Lu

   Critical Review 15 February 2022 Pages: 1415 - 1432

   

3. Laser polishing: a review of a constantly growing technology in the surface finishing of components made by additive manufacturing

   • Annamaria Gisario
   • Massimiliano Barletta
   • Francesco Veniali

   Critical Review Open access 21 February 2022 Pages: 1433 - 1472

   

4. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing

   • Rahul Davis
   • Abhishek Singh
   • Abner Ankit Lawrence

   Critical Review 23 February 2022 Pages: 1473 - 1530

   

5. Fused deposition modeling: process, materials, parameters, properties, and applications

   • Kumaresan Rajan
   • Mahendran Samykano
   • Md. Mustafizur Rahman

   Critical Review 26 February 2022 Pages: 1531 - 1570

   

6. Research progress on transition behavior control of welding droplets

   • Yiwen Li
   • Zhihai Dong
   • Yunlong Chang

   Critical Review 28 February 2022 Pages: 1571 - 1582

   

7. Effect of electrode material on removal efficiency regarding single discharges in wire EDM

   • Lukas Welschof
   • Niklas Schäfer
   • Thomas Bergs

   ORIGINAL ARTICLE Open access 16 September 2021 Pages: 1583 - 1589

   

8. Review of magnetic-assisted single-point diamond turning for ultra-high-precision optical component manufacturing

   • Shahrokh Hatefi
   • Khaled Abou-El-Hossein

   ORIGINAL ARTICLE 01 February 2022 Pages: 1591 - 1607

   

9. Milling of Inconel 718: an experimental and integrated modeling approach for surface roughness

   • Sadaf Zahoor
   • Walid Abdul-Kader
   • Muhammad Salman Habib

   ORIGINAL ARTICLE 11 February 2022 Pages: 1609 - 1624

   

10. The quantitative evaluation of the cutting surface quality levels in abrasive water jet cutting by measurement of the representative striation mark displacement

    • Martin Brandstätter
    • Andreas Wöhrle
    • Sergej Hloch

    ORIGINAL ARTICLE 12 February 2022 Pages: 1625 - 1642

    

11. Shielding gas influence on AA5086 welded joints: residual stresses analysis, microstructural characterisation and mechanical properties

    • Maria Cindra Fonseca
    • Marcos Caetano Melado
    • Cássio Barbosa

    ORIGINAL ARTICLE 12 February 2022 Pages: 1643 - 1652

    

12. Analysis and experimental study of metal streamline configuration in hot rolling forming of spiral bevel gears

    • Jing Deng
    • Chuang Jiang
    • Shaohang Liu

    ORIGINAL ARTICLE 12 February 2022 Pages: 1653 - 1662

    

13. An equivalent-sphere-based grinding of large aspheric and spherical surfaces

    • Liming Xu
    • Dejin Hu
    • Mengqi Liu

    ORIGINAL ARTICLE 12 February 2022 Pages: 1663 - 1676

    

14. Drilling of recycled carbon fibre–reinforced polymer (rCFRP) composites: analysis of burrs and microstructure

    • Norbert Geier
    • Dániel István Poór
    • Péter Tamás-Bényei

    ORIGINAL ARTICLE Open access 13 February 2022 Pages: 1677 - 1693

    

15. On the grinding performance of alumina wheels in ultrasonic vibration–assisted grinding of hardened GCr15 steel

    • Yutong Qiu
    • Biao Zhao
    • Changlan Pu

    ORIGINAL ARTICLE 14 February 2022 Pages: 1695 - 1706

    

16. Influence of tool geometric parameters on the residual stress of 7A04 aluminum alloy in LSEM

    • Zhang Ping
    • Wang Penghao
    • Yu Xiao

    ORIGINAL ARTICLE 14 February 2022 Pages: 1707 - 1728

    

17. In situ modification of case-hardening steel 16MnCr5 by C and WC addition by means of powder bed fusion with laser beam of metals (PBF-LB/M)

    • Dominic Bartels
    • Tobias Novotny
    • Michael Schmidt

    ORIGINAL ARTICLE Open access 14 February 2022 Pages: 1729 - 1745

    

18. Electromagnetic flanging using a field shaper with multiple seams

    • Ziqin Yan
    • Lei Lin
    • Lei Zhang

    ORIGINAL ARTICLE 14 February 2022 Pages: 1747 - 1763

    

19. Laser pre-structure-assisted micro-milling of Ti6Al4V titanium alloy

    • Faramarz Hojati
    • Bahman Azarhoushang
    • Dirk Biermann

    ORIGINAL ARTICLE Open access 14 February 2022 Pages: 1765 - 1776

    

20. Advanced sustainable construction materials from hazardous iron ore treatment waste, concrete debris and lime production waste

    • Vsévolod Mymrin
    • Ana Povaluk
    • Karina Q. Carvalho

    ORIGINAL ARTICLE 14 February 2022 Pages: 1777 - 1791

    

21. Conceptual robot design for the automated layout of building structures by integrating QFD and TRIZ

    • Taehoon Kim
    • Hyunsu Lim
    • Kyuman Cho

    ORIGINAL ARTICLE 14 February 2022 Pages: 1793 - 1804

    

22. Research on geometric error modeling and compensation method of CNC precision cylindrical grinding machine based on differential motion theory and Jacobian matrix

    • Jinwei Fan
    • Qian Ye

    ORIGINAL ARTICLE 15 February 2022 Pages: 1805 - 1819

    

23. Evaluation of spatter particles, metal vapour jets, and depressions considering influence of laser incident angle on melt pool behaviour

    • Kotaro Tsubouchi
    • Tatsuaki Furumoto
    • Kenji Sugiyama

    ORIGINAL ARTICLE 15 February 2022 Pages: 1821 - 1830

    

24. Effects of friction factor on mechanical performance of the AA5182 clinched joint

    • Xiaoqiang Ren
    • Chao Chen
    • Xiaolei Gao

    ORIGINAL ARTICLE 15 February 2022 Pages: 1831 - 1841

    

25. A new method for prediction of cutting force considering the influence of machine tool system and tool wear

    • Xi Chen
    • Zhao Zhang
    • Ming Luo

    ORIGINAL ARTICLE 16 February 2022 Pages: 1843 - 1852

    

26. Development of an efficient cement production monitoring system based on the improved random forest algorithm

    • Hanane Zermane
    • Abbes Drardja

    ORIGINAL ARTICLE 16 February 2022 Pages: 1853 - 1866

    

27. Selected physico-chemical properties of composite scaffolds of sintered submicrocrystalline corundum and bioglass

    • Barbara Staniewicz-Brudnik
    • Małgorzata Karolus
    • Katarzyna Dziedzic

    ORIGINAL ARTICLE Open access 16 February 2022 Pages: 1867 - 1876

    

28. Effect of zinc coating on delay nugget formation in dissimilar DP600-AISI304 welded joints obtained by the resistance spot welding process

    • Mercedes Pérez de la Parte
    • Alejandro Espinel Hernández
    • Hipólito Carvajal Fals

    ORIGINAL ARTICLE 17 February 2022 Pages: 1877 - 1887

    

29. Numerical and experimental investigation of formability in incremental sheet forming of particle-reinforced metal matrix composite sheets

    • Shakir Gatea
    • Thanaa Abdel Salam Tawfiq
    • Hengan Ou

    ORIGINAL ARTICLE 17 February 2022 Pages: 1889 - 1900

    

30. The energy density threshold evaluation for high-precision laser cleaning of the oxidized layer on 7075 aluminum alloy with 100 ns laser

    • Jing Shao
    • Ruolan Zhang
    • Shufeng Sun

    ORIGINAL ARTICLE 17 February 2022 Pages: 1901 - 1907

    

31. Study on the cutting mechanism of randomly deflected truncated cone shape single abrasive grain

    • Lansheng Zhang
    • Jingliang Jiang
    • Shufeng Sun

    ORIGINAL ARTICLE 17 February 2022 Pages: 1909 - 1928

    

32. Electrolytic in-process dressing grinding of arc groove with workpiece swing

    • Zedong Liu
    • Chengzu Ren
    • Xiao Liu

    ORIGINAL ARTICLE 17 February 2022 Pages: 1929 - 1947

    

33. Comparative investigation on surface integrity for conventional and ultrasonic vibration–assisted cutting of in situ TiB₂/7050Al MMCs

    • Xiao-fen Liu
    • Wen-hu Wang
    • Chen-wei Shan

    ORIGINAL ARTICLE 17 February 2022 Pages: 1949 - 1965

    

34. Energy consumption modelling in milling of variable curved geometry

    • Shrikant Shankarrao Pawar
    • Tufan Chandra Bera
    • Kuldip Singh Sangwan

    ORIGINAL ARTICLE 17 February 2022 Pages: 1967 - 1987

    

35. Online cutting temperature prediction using ink-jet printed sensors and model order reduction method

    • Kuan-Ming Li
    • Chi-Wen Chang
    • Chia-Hao Chang

    ORIGINAL ARTICLE 17 February 2022 Pages: 1989 - 2002

    

36. Effect of collapse and hump on thermomechanical behavior in high-power laser welding of 16-mm marine steel EH40

    • Lu Wang
    • Guojun Zhang
    • Yu Huang

    ORIGINAL ARTICLE 17 February 2022 Pages: 2003 - 2013

    

37. Modeling of material removal morphology and prediction of surface roughness based on WEDM successive discharges

    • Zhaolong Li
    • Yingtao Liu
    • Wangwang Li

    ORIGINAL ARTICLE 17 February 2022 Pages: 2015 - 2029

    

38. High-performance electrical discharge sawing of hard and brittle monocrystalline silicon by electroplated diamond wire

    • Jian Qiu
    • Renpeng Ge

    ORIGINAL ARTICLE 18 February 2022 Pages: 2031 - 2046

    

39. Microstructure, mechanical properties, and pitting corrosion resistance of SAF 2205 duplex stainless steel after friction hydro-pillar processing

    • Cleber Rodrigo de Lima Lessa
    • Guilherme Vieira Braga Lemos
    • Hamed Mirzadeh

    ORIGINAL ARTICLE 18 February 2022 Pages: 2047 - 2054

    

40. Development and implementation of crater and flank tool wear model for hard turning simulations

    • Cristian Cappellini
    • Andrea Abeni

    ORIGINAL ARTICLE Open access 18 February 2022 Pages: 2055 - 2073

    

41. Weak signal enhancement for small drill condition monitoring in PCB drilling process by using adaptive multistable stochastic resonance

    • Qifeng Tan
    • Guodong Liu
    • Hao Tong

    ORIGINAL ARTICLE 18 February 2022 Pages: 2075 - 2087

    

42. Multi-track, multi-layer dendrite growth and solid phase transformation analysis during additive manufacturing of H13 tool steel using a combined hybrid cellular automata/phase field, solid-state phase prediction models

    • Neil S. Bailey
    • Yung C. Shin

    ORIGINAL ARTICLE 18 February 2022 Pages: 2089 - 2108

    

43. Analysis and evaluation of Indian industrial system requirements and barriers affect during implementation of Industry 4.0 technologies

    • Abinash Jena
    • Saroj Kumar Patel

    ORIGINAL ARTICLE 19 February 2022 Pages: 2109 - 2133

    

44. Evaluation of: MOSSA, MOALO, MOVO and MOGWO algorithms in green machining to enhance the turning performances of X210Cr12 steel

    • Mourad Nouioua
    • Aissa Laouissi
    • Mohamed Athmane Yallese

    ORIGINAL ARTICLE 19 February 2022 Pages: 2135 - 2150

    

45. Evaluation of thermal and geometric properties of martensitic stainless steel thin walls built by additive manufacturing cold metal transfer (CMT) processes

    • Daniel Galeazzi
    • Régis Henrique Gonçalves e Silva
    • Mateus Barancelli Schwedersky

    ORIGINAL ARTICLE 19 February 2022 Pages: 2151 - 2165

    

46. Modeling of burr height in ultrasonic-assisted drilling of DD6 superalloy

    • Xiaoxiang Zhu
    • Wenhu Wang
    • Xiaofen Liu

    ORIGINAL ARTICLE 19 February 2022 Pages: 2167 - 2181

    

47. Collision-free path planning for efficient inspection of free-form surface by using a trigger probe

    • Zhengcai Zhao
    • Yao Li
    • Yucan Fu

    ORIGINAL ARTICLE 19 February 2022 Pages: 2183 - 2200

    

48. Investigation on the influence of weld position on the deformation behavior of welded tube during free bending process

    • Cheng Cheng
    • Chao Pan
    • Xunzhong Guo

    ORIGINAL ARTICLE 19 February 2022 Pages: 2201 - 2215

    

49. Adaptive planetary control with auxiliary magnetic field method for fast EDM drilling

    • Haoyu Chu
    • Zilun Li
    • Wansheng Zhao

    ORIGINAL ARTICLE 21 February 2022 Pages: 2217 - 2227

    

50. 3D hardness profile mapping and geometrical defect prediction of laser-welded galvanized steel blanks using wobbling technology: an experimental investigation

    • Sasan Sattarpanah Karganroudi
    • Ahmad Aminzadeh
    • Noureddine Barka

    ORIGINAL ARTICLE 21 February 2022 Pages: 2229 - 2246