1. Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis

   • Daniel Alexandre Morelli
   • Paulo Sergio de Arruda Ignacio

   Critical Review 04 August 2021 Pages: 691 - 705

   

2. A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

   • Xi Chen
   • Fanrong Kong
   • Haiou Zhang

   Critical Review 05 August 2021 Pages: 707 - 727

   

3. A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

   • Munish Kumar Gupta
   • Aqib Mashood Khan
   • Danil Yu Pimenov

   Critical Review 05 August 2021 Pages: 729 - 750

   

4. A generalized analysis of energy saving strategies through experiment for CNC milling machine tools

   • Chunhua Feng
   • Xiang Chen
   • Yugui Huang

   ORIGINAL ARTICLE 31 July 2021 Pages: 751 - 763

   

5. Accurate prediction of the extrusion forming bonding reliability for heterogeneous welded sheets based on GA-BP neural network

   • Lei Gao
   • Feng Li
   • Jie Xu

   ORIGINAL ARTICLE 31 July 2021 Pages: 765 - 774

   

6. Data-driven sustainability evaluation of machining system: a case study

   • Cuixia Zhang
   • Cui Wang
   • Mengdi Gao

   ORIGINAL ARTICLE 31 July 2021 Pages: 775 - 784

   

7. Evaluating the hole quality produced by vibratory drilling: additive manufactured PLA+

   • Mohammad Baraheni
   • Mohammad Reza Shabgard
   • Saeid Amini

   ORIGINAL ARTICLE 02 August 2021 Pages: 785 - 794

   

8. Numerical investigation on the effects of circuit parameters on the plastic deformation of fastener holes in thin aluminum alloy via electromagnetic expansion process

   • Xiaofei Xu
   • Huihui Geng
   • Xiaoping Ouyang

   ORIGINAL ARTICLE 02 August 2021 Pages: 795 - 807

   

9. Additive manufacturing of AISI 420 stainless steel: process validation, defect analysis and mechanical characterization in different process and post-process conditions

   • Erica Liverani
   • Alessandro Fortunato

   ORIGINAL ARTICLE Open access 02 August 2021 Pages: 809 - 821

   

10. Sinterability properties of a ceramic synthesized from Algerian kaolin and spent magnesia-carbon refractory bricks

    • Alima Mebrek

    ORIGINAL ARTICLE 02 August 2021 Pages: 823 - 834

    

11. Experimental and numerical investigations on the deformation defects by gear rolling process with local induction heating

    • Xiaobin Fu
    • Baoyu Wang
    • Tao Wang

    ORIGINAL ARTICLE 02 August 2021 Pages: 835 - 844

    

12. Development of structured light 3D-scanner with high spatial resolution and its applications for additive manufacturing quality assurance

    • Rongxuan Wang
    • Andrew C. Law
    • Zhenyu Kong

    ORIGINAL ARTICLE 02 August 2021 Pages: 845 - 862

    

13. Experiment investigation on machining characteristics of 7075 aluminium alloy with short electric arc milling

    • Dan Song
    • Jianping Zhou
    • Xiang Wang

    ORIGINAL ARTICLE 02 August 2021 Pages: 863 - 876

    

14. Mechanical properties of tubular rivet-reinforced joints realized with different reinforcing loads

    • Xiaoqiang Ren
    • Chao Chen
    • Yawen Ouyang

    ORIGINAL ARTICLE 03 August 2021 Pages: 877 - 888

    

15. Effect of outlet pressure and polymer addition on accuracy of machining stainless steel by abrasive suspension jet

    • Chiheng Qiang
    • Fengchao Wang
    • Chuwen Guo

    ORIGINAL ARTICLE 03 August 2021 Pages: 889 - 903

    

16. Manufacturing of micro components on amorphous alloy with a high-aspect-ratio characteristic structure by multistage forming method

    • Sirui Cheng
    • Jiang Ma
    • Jun Shen

    ORIGINAL ARTICLE 03 August 2021 Pages: 905 - 917

    

17. Fabrication and characterization of friction stir–processed Mg-Zn-Ca biomaterials strengthened with MgO particles

    • Zhen Liu
    • Yangchuan Cai
    • Minfang Chen

    ORIGINAL ARTICLE 03 August 2021 Pages: 919 - 932

    

18. Cutting force modeling and experimental validation for micro end milling

    • Weijie Wang
    • Weiwei Zhang
    • Wei Wang

    ORIGINAL ARTICLE 03 August 2021 Pages: 933 - 947

    

19. Microcosmic mechanism of die-sinking mixed-gas atomization discharge ablation process on titanium alloy

    • Linglei Kong
    • Xiangzhi Wang
    • Zhidong Liu

    ORIGINAL ARTICLE 03 August 2021 Pages: 949 - 960

    

20. Analysis on the interference assembly of camshaft with knurled tube and cam

    • Xiaoming Huang
    • Weitao Sun
    • Wentao You

    ORIGINAL ARTICLE 03 August 2021 Pages: 961 - 969

    

21. Study on the ultrasonic guided wave and online visual monitoring for ultrasonic precise bonding

    • Yibo Sun
    • Mengruo Cao
    • Xinhua Yang

    ORIGINAL ARTICLE 03 August 2021 Pages: 971 - 984

    

22. Investigation on the stiffness of wire web of multi-wire sawing machine and its influence on machining accuracy

    • Jian Qiu
    • Shanbao Zhang
    • Renpeng Ge

    ORIGINAL ARTICLE 04 August 2021 Pages: 985 - 995

    

23. Surrogate model–based inverse parameter estimation in deep drawing using automatic knowledge acquisition

    • Matthias Ryser
    • Felix M. Neuhauser
    • Markus Bambach

    ORIGINAL ARTICLE Open access 04 August 2021 Pages: 997 - 1013

    

24. Evaluation on the formability of the third-generation automotive medium-Mn steel based on experiment and simulation

    • Ying Chang
    • Guojun Zheng
    • Han Dong

    ORIGINAL ARTICLE 04 August 2021 Pages: 1015 - 1027

    

25. Dynamics modeling and stability improvement in the machining of thin-walled workpiece with force-tunable pneumatic fixture

    • Jinjie Jia
    • Jinbo Niu
    • Yuwen Sun

    ORIGINAL ARTICLE 04 August 2021 Pages: 1029 - 1043

    

26. Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties

    • Antonello Astarita
    • Fausto Tucci
    • Pierpaolo Carlone

    ORIGINAL ARTICLE Open access 04 August 2021 Pages: 1045 - 1059

    

27. Investigation of the wear behavior of abrasive grits in a dry machining Inconel 718 narrow-deep-groove with a single-layer cubic boron nitride grinding wheel

    • Guang Li
    • Guoxing Liang
    • Mohammed Al-Nehari

    ORIGINAL ARTICLE 04 August 2021 Pages: 1061 - 1076

    

28. Nonlinear vibratory properties of additive manufactured continuous carbon fiber reinforced polymer composites

    • Jing Zhao
    • Edmon Perkins
    • Dan Marghitu

    ORIGINAL ARTICLE 04 August 2021 Pages: 1077 - 1089

    

29. Temperature uniformity of profiled grinding wheel under high-frequency induction brazing

    • Li Qilin
    • Ding Kai
    • Wang Xichao

    ORIGINAL ARTICLE 05 August 2021 Pages: 1091 - 1099

    

30. Force prediction model of high efficiency U pass milling

    • Jingyang Feng
    • Zhaocheng Wei
    • Xueqin Wang

    ORIGINAL ARTICLE 05 August 2021 Pages: 1101 - 1115

    

31. Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources

    • Jinfu Zhao
    • Zhanqiang Liu
    • Qinghua Song

    ORIGINAL ARTICLE 05 August 2021 Pages: 1117 - 1132

    

32. A multi-dwell temperature profile design for the cure of thick CFRP composite laminates

    • Wenchang Zhang
    • Yingjie Xu
    • Weihong Zhang

    ORIGINAL ARTICLE 05 August 2021 Pages: 1133 - 1146

    

33. A geometric prediction model of surface morphology in micro-EDM considering stochastic characteristics of discharge crater size

    • Shaojie Hou
    • Jicheng Bai

    ORIGINAL ARTICLE 05 August 2021 Pages: 1147 - 1162

    

34. Study of dieless radial spinning for thick-walled cylindrical parts with external grooves

    • Famei Liu
    • Junsong Jin
    • Xinyun Wang

    ORIGINAL ARTICLE 05 August 2021 Pages: 1163 - 1178

    

35. Machinability study and ANN-MOALO-based multi-response optimization during Eco-Friendly machining of EN-GJL-250 cast iron

    • Aissa Laouissi
    • Mourad Nouioua
    • Mohamed Lamine Bouhalais

    ORIGINAL ARTICLE 06 August 2021 Pages: 1179 - 1192

    

36. Experimental and numerical investigation of forming defects and stress analysis in laser-welded blanks during deep drawing process

    • Ahmad Aminzadeh
    • Sasan Sattarpanah Karganroudi
    • Noureddine Barka

    ORIGINAL ARTICLE 06 August 2021 Pages: 1193 - 1207

    

37. Comprehensive performance evaluation method of CNC servo turrets based on accuracy retentivity theory

    • Tongtong Jin
    • Zhaojun Yang
    • Hailong Tian

    ORIGINAL ARTICLE 06 August 2021 Pages: 1209 - 1222

    

38. Tool path generation with global interference avoidance for the robotic polishing of blisks

    • Yuanming Wang
    • Jixiang Yang
    • Han Ding

    ORIGINAL ARTICLE 06 August 2021 Pages: 1223 - 1232

    

39. Strain effect on microstructural properties of SUS 304L joint by PAW+GTAW

    • Wang Juan
    • Li Yajiang
    • Li Hang

    ORIGINAL ARTICLE Open access 06 August 2021 Pages: 1233 - 1242

    

40. Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing

    • Lei Ji
    • Yan Zhang
    • Wentao Yang

    ORIGINAL ARTICLE 06 August 2021 Pages: 1243 - 1262

    

41. Research on a multidimensional strain energy estimation method for welding spots based on performance optimization

    • Haisheng Song
    • Changhai Yang
    • Zhiyong Chen

    ORIGINAL ARTICLE 06 August 2021 Pages: 1263 - 1273

    

42. Investigation of ultrasonic-assisted CNC cutting of honeycomb cores

    • Dongfang Mu
    • Xiaoping Hu
    • Baohua Yu

    ORIGINAL ARTICLE Open access 06 August 2021 Pages: 1275 - 1286

    

43. Effect of direct energy deposition parameters on morphology, residual stresses, density, and microstructure of 1.2709 maraging steel

    • Kulish Aleksandr
    • Salvatore Ferdinando
    • Joffre Thomas

    ORIGINAL ARTICLE 07 August 2021 Pages: 1287 - 1301

    

44. Reliability evaluation method for squeeze casting process parameter data

    • Jianxin Deng
    • Zhixing Ye
    • Bin Xie

    ORIGINAL ARTICLE 07 August 2021 Pages: 1303 - 1325