1. A state-of-the-art review on sensors and signal processing systems in mechanical machining processes

   • Mustafa Kuntoğlu
   • Emin Salur
   • Danil Yu. Pimenov

   Critical Review 06 July 2021 Pages: 2711 - 2735

   

2. Finite element methods used in clinching process

   • Denglin Qin
   • Chao Chen
   • Huiyang Zhang

   Critical Review 15 July 2021 Pages: 2737 - 2776

   

3. Finite element simulation of ultrasonic-assisted machining: a review

   • Mohammad Lotfi
   • Javad Akbari

   Critical Review 15 July 2021 Pages: 2777 - 2796

   

4. Research progress of improving surface friction properties by surface texture technology

   • Keyang Chen
   • Xuefeng Yang
   • Yalong Gao

   Critical Review 15 July 2021 Pages: 2797 - 2821

   

5. Development of an expert system for optimal design of the grinding process

   • Mohammad Baraheni
   • Bahman Azarhoushang
   • Saied Amini

   ORIGINAL ARTICLE 12 July 2021 Pages: 2823 - 2833

   

6. Simulating a high-speed abrasive particle impacting on a tensile block using SPH-FEM

   • Yanjie Liu
   • Yue Zhao
   • Ming Chen

   ORIGINAL ARTICLE 12 July 2021 Pages: 2835 - 2845

   

7. The effect of tool pin size and taper angle on the thermal process and plastic material flow in friction stir welding

   • Jie Chen
   • Lei Shi
   • Yuanning Jiang

   ORIGINAL ARTICLE 12 July 2021 Pages: 2847 - 2860

   

8. A new single probe scanning method for on-machine measurement of roundness error

   • Bin Duan
   • Ziqiang Yin
   • Jianhua Yao

   ORIGINAL ARTICLE 12 July 2021 Pages: 2861 - 2871

   

9. Surface and interior residual stress analysis of a deep-drawn 1180-MPa class ultra-high strength steel sheet with scratch marks

   • Takashi Matsuno
   • Yuta Ochiai
   • Takao Mikami

   ORIGINAL ARTICLE 13 July 2021 Pages: 2873 - 2884

   

10. Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators

    • Bachir Adda
    • Ahmed Belaadi
    • Mostefa Bourchak

    ORIGINAL ARTICLE 13 July 2021 Pages: 2885 - 2907

    

11. Numerical and experimental study on the flow characteristics and the erosive ability of magnetorheological jet

    • Zhe Lv
    • Rongguo Hou
    • Xiangtian Wang

    ORIGINAL ARTICLE 13 July 2021 Pages: 2909 - 2916

    

12. Fatigue design curves for laser-metal-deposited type 420 stainless steel and effect of an interval during deposition process

    • Yoshihiko Uematsu
    • Ryosuke Sasaki
    • Ri-ichiro Sano

    ORIGINAL ARTICLE 14 July 2021 Pages: 2917 - 2927

    

13. Effect of cutting parameters and cutting edge preparation on milling of VP20TS steel

    • Marcos Guilherme Carvalho Braulio Barbosa
    • Amauri Hassui
    • Patrick Abreu de Oliveira

    ORIGINAL ARTICLE 15 July 2021 Pages: 2929 - 2942

    

14. A method of welding path planning of steel mesh based on point cloud for welding robot

    • Yusen Geng
    • Yuankai Zhang
    • Yigang Cui

    ORIGINAL ARTICLE 15 July 2021 Pages: 2943 - 2957

    

15. Understanding novel assisted electrode from a theoretical and experimental perspectives for EDM of aluminum nitride ceramics

    • Asif Rashid
    • Asma Perveen
    • Muhammad P. Jahan

    ORIGINAL ARTICLE 15 July 2021 Pages: 2959 - 2973

    

16. Laser forming process of complex surface on Al7075

    • Xiaogang Wang
    • Yongjun Shi
    • Xiaoyu Zhao

    ORIGINAL ARTICLE 15 July 2021 Pages: 2975 - 2988

    

17. A general method for calibration of milling force coefficients and cutter runout parameters simultaneously for helical end milling

    • Zhao Zhang
    • Zepeng Liang
    • Dinghua Zhang

    ORIGINAL ARTICLE 15 July 2021 Pages: 2989 - 2997

    

18. A novel accurate positioning method for object pose estimation in robotic manipulation based on vision and tactile sensors

    • Dan Zhao
    • Fuchun Sun
    • Quan Zhou

    ORIGINAL ARTICLE 15 July 2021 Pages: 2999 - 3010

    

19. Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites

    • Üsame Ali Usca
    • Mahir Uzun
    • Munish Kumar Gupta

    ORIGINAL ARTICLE 15 July 2021 Pages: 3011 - 3025

    

20. C-ALB (Collaborative Assembly Line Balancing): a new approach in cobot solutions

    • Giovanni Boschetti
    • Maurizio Faccio
    • Riccardo Minto

    ORIGINAL ARTICLE Open access 15 July 2021 Pages: 3027 - 3042

    

21. Fabrication of S-shaped micron-sized constrictions on FeC (steel) surface using femtosecond laser ablation with beam shaping

    • Patrice Umenne

    ORIGINAL ARTICLE 16 July 2021 Pages: 3043 - 3050

    

22. Evaluation of machinability-based sustainability indicators in the eco-benign turning of Ti3Al2.5V alloy with textured tools

    • Rupinder Singh
    • Munish Kumar Gupta
    • A. Garcia-Collado

    ORIGINAL ARTICLE 16 July 2021 Pages: 3051 - 3061

    

23. A new hot forging method for the die temperature higher than the billet temperature

    • Lin Yuan
    • Qinghe Wei
    • Bin Guo

    ORIGINAL ARTICLE 16 July 2021 Pages: 3063 - 3074

    

24. Fabrication of large-scale infrared diffractive lens arrays on chalcogenide glass by means of step-and-repeat hot imprinting and non-isothermal glass molding

    • Yang Shu
    • Tiantong Chen
    • Allen Y. Yi

    ORIGINAL ARTICLE 16 July 2021 Pages: 3075 - 3085

    

25. Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation

    • Katja Klauer
    • Matthias Eifler
    • Jan C. Aurich

    ORIGINAL ARTICLE Open access 16 July 2021 Pages: 3087 - 3102

    

26. An investigation on discharge servo parameters and machining servo mode optimization of MS-WEDM

    • Huliang Ma
    • Yanqing Wang
    • Shengqiang Yang

    ORIGINAL ARTICLE 16 July 2021 Pages: 3103 - 3113

    

27. Effect of end-clamping constraints on bending crashworthiness of square profiles

    • Quirino Estrada
    • Julio Vergara-Vázquez
    • Martin Ortiz-Domínguez

    ORIGINAL ARTICLE 16 July 2021 Pages: 3115 - 3134

    

28. Milling Inconel 718 workpiece with cryogenically treated and untreated cutting tools

    • Hüseyin Gürbüz
    • Şehmus Baday

    ORIGINAL ARTICLE 17 July 2021 Pages: 3135 - 3148

    

29. Effect of surface line/regular hexagonal texture on tribological performance of cemented carbide tool for machining Ti-6Al-4V alloys

    • Kairui Zheng
    • Fazhan Yang
    • Dongchao Bian

    ORIGINAL ARTICLE 17 July 2021 Pages: 3149 - 3162

    

30. Cutting temperature measurement in turning of thermoplastic composites using a tool-work thermocouple

    • Petr Masek
    • Pavel Zeman
    • Petr Kolar

    ORIGINAL ARTICLE 17 July 2021 Pages: 3163 - 3178

    

31. Modeling and optimization of weld bead profile with varied welding stages for weathering steel A606

    • Dawei Zhao
    • Yuriy Bezgans
    • Vitaly Bykov

    ORIGINAL ARTICLE 19 July 2021 Pages: 3179 - 3192

    

32. A mixed reality platform for assembly assistance based on gaze interaction in industry

    • Zenglei Wang
    • Shusheng Zhang
    • Xiaoliang Bai

    ORIGINAL ARTICLE 19 July 2021 Pages: 3193 - 3205

    

33. Fabrication and characterization of in situ structural health monitoring hybrid continuous carbon/glass fiber–reinforced thermoplastic composite

    • Congcong Luan
    • Xinhua Yao
    • Jianzhong Fu

    ORIGINAL ARTICLE 19 July 2021 Pages: 3207 - 3215

    

34. Magnetic-enhanced common conductive channel characteristics of two-electrode TIG

    • Yanli Zhu
    • Xinkun Xu
    • Liming Liu

    ORIGINAL ARTICLE 19 July 2021 Pages: 3217 - 3229

    

35. Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion

    • Parviz Asadi
    • Mostafa Akbari

    ORIGINAL ARTICLE 19 July 2021 Pages: 3231 - 3245

    

36. A novel approach to modelling the bond characteristics between CFRP fabrics and steel plate joints under quasi-static tensile loads

    • Hemad Hamedi
    • Ata Kamyabi-Gol

    ORIGINAL ARTICLE 19 July 2021 Pages: 3247 - 3261

    

37. 3D printing of porcelain: finite element simulation of anisotropic sintering

    • Charles Manière
    • Christelle Harnois
    • Sylvain Marinel

    ORIGINAL ARTICLE 19 July 2021 Pages: 3263 - 3275

    

38. Design of precision finishing method for cold extruded sun gear with internal-external tooth shapes

    • Zuofa Liu
    • Qiuyun Wang
    • Qiang Liang

    ORIGINAL ARTICLE 19 July 2021 Pages: 3277 - 3293

    

39. A measurement method of the belt grinding allowance of hollow blades based on blue light scanning

    • Guijian Xiao
    • Shuai Liu
    • Shayu Song

    ORIGINAL ARTICLE 19 July 2021 Pages: 3295 - 3303

    

40. Development and research of the press operating mechanism, made in the form of the wedge-joint mechanism with a curving wedge for separation operations

    • Sergii G. Karnaukh
    • Nataly V. Chosta
    • Volodymyr V. Kukhar

    ORIGINAL ARTICLE 19 July 2021 Pages: 3305 - 3314

    

41. Comparison in performance by emulsion and SiC nanofluids HS-WEDM multi-cutting process

    • Cuixia Guo
    • Zhangyong Wu
    • Jianping Zhang

    ORIGINAL ARTICLE 20 July 2021 Pages: 3315 - 3324

    

42. A prediction model for bending springback of AZM120 sheet metal and mechanical compensation of CNC automatic panel bender

    • Chen Chen
    • Junjie Gong
    • Jinrong Wang

    ORIGINAL ARTICLE 20 July 2021 Pages: 3325 - 3337

    

43. On-line autonomous path optimization for multi-pass incremental forming using model predictive control

    • An He
    • Chenhao Wang
    • Paul A. Meehan

    ORIGINAL ARTICLE 20 July 2021 Pages: 3339 - 3353

    

44. Theoretical modeling and experimental research on the depth of radial material removal for flexible grinding

    • Gang Zheng
    • Keyan Chen
    • Xu Zhang

    Application 14 July 2021 Pages: 3355 - 3365

    

45. Correction to: A new in-process material removal rate monitoring approach in abrasive belt grinding

    • Lijuan Ren
    • Guangpeng Zhang
    • Yumei Huang

    Correction 17 May 2021 Pages: 3367 - 3367