1. Cutting edge microgeometries in metal cutting: a review

   • Kejia Zhuang
   • Changni Fu
   • Cheng Hu

   Critical Review 08 July 2021 Pages: 2045 - 2092

   

2. A review on laser transmission welding of thermoplastics

   • Jing Wu
   • Song Lu
   • Jin-Wang

   Critical Review 09 July 2021 Pages: 2093 - 2109

   

3. An improved numerical integration method to predict the milling stability based on the Lagrange interpolation scheme

   • Yan Xia
   • Yi Wan
   • Qinghua Song

   ORIGINAL ARTICLE 06 July 2021 Pages: 2111 - 2123

   

4. Research on cutting performance in high-speed milling of TC11 titanium alloy using self-propelled rotary milling cutters

   • Lu Yujiang
   • Chen Tao

   ORIGINAL ARTICLE 06 July 2021 Pages: 2125 - 2135

   

5. Effect of tool traverse speed on fabrication of open-cell copper foam using friction processing

   • Vyas Mani Sharma
   • Surjya Kanta Pal
   • Vikranth Racherla

   ORIGINAL ARTICLE 06 July 2021 Pages: 2137 - 2147

   

6. Towards optimization of thickness, hardness, and porosity of low-pressure cold sprayed WC-Ni coatings

   • Wania Jibran
   • James Hogan
   • André McDonald

   ORIGINAL ARTICLE 06 July 2021 Pages: 2149 - 2160

   

7. Tracking the maturity of industry 4.0: the perspective of a real scenario

   • Vítor Alcácer
   • Carolina Rodrigues
   • Virgilio Cruz-Machado

   ORIGINAL ARTICLE 06 July 2021 Pages: 2161 - 2181

   

8. Numerical simulation and experimental research on rubber flexible-die forming limitation with new position-limited backpressure mechanism

   • Zhiren Han
   • Chuang Wei
   • Xinyang Du

   ORIGINAL ARTICLE 06 July 2021 Pages: 2183 - 2196

   

9. Performance evaluation of SiC powder mixed electrical discharge machining: a case of wire cut mode with re-circulating molybdenum wire

   • Muhammad Qaiser Saleem
   • Maham Naqvi
   • Kashif Ishfaq

   ORIGINAL ARTICLE 06 July 2021 Pages: 2197 - 2210

   

10. Optimization of the coupled cooling circuit in electromagnetic forming with finite element analysis

    • Lantao Huang
    • Zinan Ding
    • Quqin Sun

    ORIGINAL ARTICLE 06 July 2021 Pages: 2211 - 2221

    

11. Research on cellular morphology and mechanical properties of microcellular injection–molded BCPP and its blends

    • Jiachang Wang
    • Guilong Wang
    • Chul B. Park

    ORIGINAL ARTICLE 07 July 2021 Pages: 2223 - 2241

    

12. Research on gradient additive remanufacturing of ultra-large hot forging die based on automatic wire arc additive manufacturing technology

    • Xiaoying Hong
    • Guiqian Xiao
    • Jie Zhou

    ORIGINAL ARTICLE 07 July 2021 Pages: 2243 - 2254

    

13. Rapid prediction of thrust force coupling scale-span model and revised ANN in drilling CFRPs

    • Yong Liu
    • Qiannan Li
    • Wenliang Chen

    ORIGINAL ARTICLE 07 July 2021 Pages: 2255 - 2268

    

14. Machining performance of PCD drill in low-frequency vibration-assisted drilling of CFRP/Ti6Al4V stack: with special emphasis on the plowing behavior

    • Chaoren Yan
    • Yan Chen
    • Nan Guo

    ORIGINAL ARTICLE 07 July 2021 Pages: 2269 - 2283

    

15. Rotary friction welded C45 to 16NiCr6 steel rods: statistical optimization coupled to mechanical and microstructure approaches

    • Youcef Belkahla
    • Azzeddine Mazouzi
    • Djamel Miroud

    ORIGINAL ARTICLE 07 July 2021 Pages: 2285 - 2298

    

16. An intelligent control approach for defect-free friction stir welding

    • Richard Cobos
    • Santiago D. Salas
    • T. Warren Liao

    ORIGINAL ARTICLE 08 July 2021 Pages: 2299 - 2308

    

17. Concurrent improvement of surface roughness and residual stress of as-built and aged additively manufactured maraging steel post-processed by milling

    • Amanda Rossi de Oliveira
    • Erik Gustavo Del Conte

    ORIGINAL ARTICLE 08 July 2021 Pages: 2309 - 2323

    

18. A general method for instantaneous undeformed chip thickness calculation in five-axis milling based on Boolean operations

    • Guochao Li
    • Yunlong Liu
    • Xuwen Jing

    ORIGINAL ARTICLE 08 July 2021 Pages: 2325 - 2334

    

19. An integrated approach for the modelling of silicon carbide components laser milling process

    • Claudio Leone
    • Silvio Genna
    • Vincenzo Tagliaferri

    ORIGINAL ARTICLE Open access 08 July 2021 Pages: 2335 - 2357

    

20. The wettability of metal-based composite foils with hierarchical structure prepared by ultrasonic-assisted composite electrodeposition

    • Chunxia Wu
    • Hang Zhao
    • Yongchang Xiao

    ORIGINAL ARTICLE 08 July 2021 Pages: 2359 - 2371

    

21. Experimental study on turning performance of a novel nanofluid prepared by composites of MWCNTs

    • Jiju Guan
    • Yunpeng Ding
    • Zhiliang Wang

    ORIGINAL ARTICLE 09 July 2021 Pages: 2373 - 2385

    

22. Co–Cr–Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties

    • Alex Matos da Silva Costa
    • João Pedro Oliveira
    • Johnnatan Rodriguez

    ORIGINAL ARTICLE 09 July 2021 Pages: 2387 - 2399

    

23. Conventional and swing friction stir spot welding of aluminum alloy to magnesium alloy

    • Siyu Wu
    • Tao Sun
    • Wenming Liu

    ORIGINAL ARTICLE 09 July 2021 Pages: 2401 - 2412

    

24. Sensor-based leakage detection in vacuum bagging

    • Anja Haschenburger
    • Niklas Menke
    • Jan Stüve

    ORIGINAL ARTICLE Open access 09 July 2021 Pages: 2413 - 2424

    

25. Numerical investigation of the effect of material properties on forming metal bellows

    • Jing Liu
    • Yang Liu
    • Jian Liu

    ORIGINAL ARTICLE 09 July 2021 Pages: 2425 - 2436

    

26. Study on the amplitude effect on micro-hole drilling of AISI 4340 by ultrasonic vibration

    • Guangjun Chen
    • Jinkai Xu
    • Huadong Yu

    ORIGINAL ARTICLE 09 July 2021 Pages: 2437 - 2453

    

27. The mechanism of crack generation and propagation in the new casting alloy GH4151 during cogging

    • Zhi Jia
    • Baolin Wei
    • Hanfeng Chen

    ORIGINAL ARTICLE 09 July 2021 Pages: 2455 - 2465

    

28. Surface integrity analysis of surfaces of nickel-based alloys machined with distilled water and aluminium powder-mixed dielectric fluid after WEDM

    • Vinod Kumar Rohilla
    • Rachin Goyal
    • Neeraj Sharma

    ORIGINAL ARTICLE 09 July 2021 Pages: 2467 - 2472

    

29. Production control of unreliable manufacturing systems with perishable inventory

    • Vladmir Polotski
    • Ali Gharbi
    • Jean-Pierre Kenne

    ORIGINAL ARTICLE 09 July 2021 Pages: 2473 - 2496

    

30. Effects of tool wear on machined surface integrity during milling of Inconel 718

    • Liang Tan
    • Changfeng Yao
    • Xuehong Shen

    ORIGINAL ARTICLE 09 July 2021 Pages: 2497 - 2509

    

31. Laser scanning–based straightness measurement of precision bright steel rods at one point

    • Tobias Schmid-Schirling
    • Lea Kraft
    • Daniel Carl

    ORIGINAL ARTICLE Open access 09 July 2021 Pages: 2511 - 2519

    

32. A comparative analysis of hot and cold flashless forging of a stepped shaft using vertically-parted dies

    • Tomasz Bulzak
    • Janusz Tomczak
    • Zbigniew Pater

    ORIGINAL ARTICLE Open access 10 July 2021 Pages: 2521 - 2530

    

33. Machine vision-based intelligent manufacturing using a novel dual-template matching: a case study for lithium battery positioning

    • Xiaoqiang Guo
    • Xinhua Liu
    • Zhixiong Li

    ORIGINAL ARTICLE 10 July 2021 Pages: 2531 - 2551

    

34. Identification of the speed-varying dynamic behaviors of tool center point based on semi-theoretical methodology

    • Teng Hu
    • Weizhen Ma
    • Liang Mi

    ORIGINAL ARTICLE 10 July 2021 Pages: 2553 - 2567

    

35. A novel severe plastic deformation method for manufacturing Al/Mg bimetallic tube

    • Ye Tian
    • Hongjun Hu
    • Dingfei Zhang

    ORIGINAL ARTICLE 10 July 2021 Pages: 2569 - 2575

    

36. Thermo-mechanical forging of 708M40 steel ring samples: experiments and modelling

    • Steven Hill
    • Richard P.Turner

    ORIGINAL ARTICLE Open access 10 July 2021 Pages: 2577 - 2590

    

37. The mechanics of sawing granite with diamond wire

    • Janusz Stefan Konstanty

    ORIGINAL ARTICLE Open access 10 July 2021 Pages: 2591 - 2597

    

38. Comparison of EDM and laser trepanation micro-drilling processes using multiple-criteria decision analysis

    • Ricardo Vinícius Bubna Biscaia
    • Ana Caroline Dzulinski
    • Aldo Braghini Junior

    ORIGINAL ARTICLE 10 July 2021 Pages: 2599 - 2612

    

39. Multi-objective optimization of support structures for metal additive manufacturing

    • Wadea Ameen
    • Abdulrahman Al-Ahmari
    • Husam Kaid

    ORIGINAL ARTICLE 12 July 2021 Pages: 2613 - 2632

    

40. Position prediction and error compensation for a large thin-walled box-shaped workpiece in a fixture

    • Dingqiang Peng
    • Liming Wang
    • Yimin Shao

    ORIGINAL ARTICLE 12 July 2021 Pages: 2633 - 2649

    

41. Workpiece vibration in feed direction assisted electrochemical cutting using tube electrode with inclined holes

    • Tao Yang
    • Xiaolong Fang
    • Yongbin Zeng

    ORIGINAL ARTICLE 12 July 2021 Pages: 2651 - 2660

    

42. Study of cracking susceptibility in similar and dissimilar welds between carbon steel and austenitic stainless steel through finger test and FE numerical model

    • Nereyda Alcantar-Modragón
    • Víctor García-García
    • Héctor Javier Vergara-Hernández

    ORIGINAL ARTICLE 12 July 2021 Pages: 2661 - 2686

    

43. Effect of ultrasonic impact time on microstructure and properties of 7A52 aluminum alloy tandem MIG welded joint

    • Furong Chen
    • Yihang Yang
    • Nan Li

    Application 07 July 2021 Pages: 2687 - 2696

    

44. Tool wear condition monitoring by combining spindle motor current signal analysis and machined surface image processing

    • Jun Yuan
    • Libing Liu
    • Yanrui Zhang

    Application 09 July 2021 Pages: 2697 - 2709