1. Current trends and research opportunities in hybrid additive manufacturing

   • Ugur M. Dilberoglu
   • Bahar Gharehpapagh
   • Melik Dolen

   Critical Review 27 January 2021 Pages: 623 - 648

   

2. Mechanical characterization and properties of laser-based powder bed–fused lattice structures: a review

   • Leonardo Riva
   • Paola Serena Ginestra
   • Elisabetta Ceretti

   Critical Review Open access 28 January 2021 Pages: 649 - 671

   

3. Configuration optimization of the feature-oriented reference system in large component assembly

   • Qi Zeng
   • Shuanggao Li
   • Xiang Huang

   ORIGINAL ARTICLE 08 January 2021 Pages: 673 - 687

   

4. Correction to: Configuration optimization of the feature-oriented reference system in large component assembly

   • Qi Zeng
   • Shuanggao Li
   • Xiang Huang

   Correction 15 February 2021 Pages: 689 - 690

5. A novel double-side welding approach for friction stir welding of polypropylene plate

   • Rahul Kanti Nath
   • Vinayak Jha
   • John Deb Barma

   ORIGINAL ARTICLE Open access 12 January 2021 Pages: 691 - 703

   

6. Springback analysis of different A-values of Cu and Al tubes in free bending forming technology: experimentation and finite element modeling

   • Wei Wang
   • Shenghan Hu
   • Jie Tao

   ORIGINAL ARTICLE 26 January 2021 Pages: 705 - 719

   

7. Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method

   • Mostafa Akbari
   • Parviz Asadi
   • Reza Abdi Behnagh

   ORIGINAL ARTICLE 27 January 2021 Pages: 721 - 734

   

8. Integrated optimization method for helical gear hobbing parameters considering machining efficiency, cost and precision

   • Dayuan Wu
   • Ping Yan
   • Runzhong Yi

   ORIGINAL ARTICLE 27 January 2021 Pages: 735 - 756

   

9. A theoretical model to study the cutting force characteristics in remanufacturing turning of laser cladded coatings

   • Peirong Zhang
   • Jin Du
   • Chonghai Xu

   ORIGINAL ARTICLE 27 January 2021 Pages: 757 - 769

   

10. Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing

    • Pawan Verma
    • Jabir Ubaid
    • S. Kumar

    ORIGINAL ARTICLE Open access 27 January 2021 Pages: 771 - 784

    

11. Mechanical properties and microstructure of multi-pass butt weld of plates made of Al-Mg-Zr alloy sparingly doped with scandium

    • Dovzhenko Nikolay Nikolaevich
    • Demchenko Aleksandr Igorevich
    • Lopatina Ekaterina Sergeevna

    ORIGINAL ARTICLE 27 January 2021 Pages: 785 - 805

    

12. Effect of grinding with different CBN grains applied to austempered ductile iron linked to quality and industrial cost

    • Rodrigo Ráfaga de Souza
    • Douglas Lyra de Moraes
    • Eduardo Carlos Bianchi

    ORIGINAL ARTICLE 27 January 2021 Pages: 807 - 820

    

13. Prediction research for surface topography of internal grinding based on mechanism and data model

    • Qianwei Gu
    • Zhaohui Deng
    • Julong Yuan

    ORIGINAL ARTICLE 28 January 2021 Pages: 821 - 836

    

14. Laser cladding of Stellite-6 with a coaxial nozzle via modeling and systematic experimental investigations

    • Christopher Katinas
    • Tyler Throop
    • Alex Frank

    ORIGINAL ARTICLE 28 January 2021 Pages: 837 - 853

    

15. Effect of microstructure on high-speed cutting modified anti-fatigue performance of Incoloy A286 and titanium alloy TC17

    • Guoliang Liu
    • Chuanzhen Huang
    • Wei Wang

    ORIGINAL ARTICLE 28 January 2021 Pages: 855 - 866

    

16. A study on the process efficiency of laser-assisted machining investigating energy consumption

    • Won-Jung Oh
    • Choon-Man Lee

    ORIGINAL ARTICLE 28 January 2021 Pages: 867 - 882

    

17. Machining performance enhancement of deep micro drilling using electrochemical discharge machining under magnetohydrodynamic effect

    • Yi Xu
    • Baoyang Jiang

    ORIGINAL ARTICLE 28 January 2021 Pages: 883 - 892

    

18. Theoretical study on frequency spectrum characteristics of surface profiles generated in micro-end-milling process

    • Tao Wang
    • Xiaoyu Wu
    • Shuangchen Ruan

    ORIGINAL ARTICLE 28 January 2021 Pages: 893 - 906

    

19. Investigation on formation mechanism of the burrs during abrasive reaming based on the single-particle abrasive micro-cutting behavior

    • Changyong Yang
    • Jianzhong Huang
    • Shaowu Gao

    ORIGINAL ARTICLE 28 January 2021 Pages: 907 - 921

    

20. Influence mechanism of multi-factor on the diameter of the stepped hole in the drilling of CFRP/Ti stacks

    • Zhenchao Qi
    • Ende Ge
    • Shaofeng Jin

    ORIGINAL ARTICLE 28 January 2021 Pages: 923 - 933

    

21. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization

    • João Paulo Colafemina
    • Marcel Henrique Militão Dib
    • Renato Goulart Jasinevicius

    ORIGINAL ARTICLE 28 January 2021 Pages: 935 - 953

    

22. System integration for predictive process adjustment and cloud computing-based real-time condition monitoring of vibration sensor signals in automated storage and retrieval systems

    • Sujeong Baek

    ORIGINAL ARTICLE Open access 29 January 2021 Pages: 955 - 966

    

23. Surface finishing of additively manufactured IN718 lattices by electrochemical machining

    • Matthew E. Lynch
    • Kerisha Williams
    • Tommaso Beccuti

    ORIGINAL ARTICLE 29 January 2021 Pages: 967 - 984

    

24. Surface burn behavior in creep-feed deep grinding of gamma titanium aluminide intermetallics: characterization, mechanism, and effects

    • Xinxin Xi
    • Yejun Zhu
    • Wenfeng Ding

    ORIGINAL ARTICLE 30 January 2021 Pages: 985 - 996

    

25. Experimental study on short electric arc machining of Ti6Al4V in terms of power output characteristics

    • Zongjie Zhou
    • Jianping Zhou
    • Lizhong Wang

    ORIGINAL ARTICLE 30 January 2021 Pages: 997 - 1008

    

26. Machining process modeling of green alumina ceramics in orthogonal cutting and fragmentation process

    • Yayun Liu
    • Jianxin Deng

    ORIGINAL ARTICLE 31 January 2021 Pages: 1009 - 1027

    

27. Temperature-sensitive point selection and thermal error modeling of spindle based on synthetical temperature information

    • Zheyu Li
    • Guolong Li
    • Xin Dong

    ORIGINAL ARTICLE 31 January 2021 Pages: 1029 - 1043

    

28. Geometric error sensitivity analysis for a 6-axis welding equipment based on Lie theory

    • Weihua Fang
    • Xincheng Tian

    ORIGINAL ARTICLE 31 January 2021 Pages: 1045 - 1056

    

29. Micro-milling/micro-EDM combined processing technology for complex microarray cavity fabrication

    • Han Wang
    • Yang Li
    • Zhenlong Wang

    ORIGINAL ARTICLE 01 February 2021 Pages: 1057 - 1071

    

30. Is ink heating a relevant concern in the High Speed Sintering process?

    • Rhys J. Williams
    • Patrick J. Smith
    • Candice Majewski

    ORIGINAL ARTICLE Open access 01 February 2021 Pages: 1073 - 1080

    

31. Machining of cylindrical parts by wire electrical discharge grinding using thin plate guide

    • Yanqing Wang
    • Huliang Ma
    • Shengqiang Yang

    ORIGINAL ARTICLE 01 February 2021 Pages: 1081 - 1096

    

32. Numerical simulation analysis of rubber flexible die properties on forming quality of the double-curved part for 6K21-T4 aluminum alloy

    • Rui Zhang
    • Zhong-Jin Wang

    ORIGINAL ARTICLE 01 February 2021 Pages: 1097 - 1110

    

33. A design of fuzzy inference systems to predict tensile properties of as-cast alloy

    • He Tan
    • Vladimir Tarasov
    • Salem Seifeddine

    ORIGINAL ARTICLE Open access 01 February 2021 Pages: 1111 - 1123

    

34. Quantification and analysis of coating surface strains in T-bend tests

    • Fabian S. Sorce
    • Sonny Ngo
    • Ambrose C. Taylor

    ORIGINAL ARTICLE Open access 01 February 2021 Pages: 1125 - 1142

    

35. Life cycle carbon emission assessments and comparisons of cast iron and resin mineral composite machine tool bed in China

    • Yan Ma
    • Fangyi Li
    • Lin Kong

    ORIGINAL ARTICLE 01 February 2021 Pages: 1143 - 1152

    

36. Rapid manufacturing of large diameter Cu micropillars by micro-electrical discharge machining and focused ion beam

    • Ui Seok Lee
    • Bo Hyun Kim
    • Chung-Seog Oh

    ORIGINAL ARTICLE 01 February 2021 Pages: 1153 - 1162

    

37. Eco-friendly manufacturing towards the industry of the future with a focus on less cutting fluid and high workpiece quality applied to the grinding process

    • Bruno Kenta Sato
    • José Claudio Lopes
    • Eduardo Carlos Bianchi

    ORIGINAL ARTICLE 02 February 2021 Pages: 1163 - 1172

    

38. Statistical modeling and optimization of the resistance welding process with simultaneous expulsion magnitude consideration for high-strength low alloy steel

    • Dawei Zhao
    • Alexander Osipov
    • Dongjie Liang

    ORIGINAL ARTICLE 02 February 2021 Pages: 1173 - 1189

    

39. Micro-EDM-assisted machining micro-holes in printed circuit board

    • Bin Xu
    • Xin-ke Feng
    • Jian-guo Lei

    ORIGINAL ARTICLE 02 February 2021 Pages: 1191 - 1201

    

40. Investigation of electrochemical reduction effects on graphene oxide powders for high-performance supercapacitors

    • Yi-Fang Hung
    • Chia Cheng
    • Shih-Feng Tseng

    Application 26 January 2021 Pages: 1203 - 1213

    

41. Influence of tool characteristics on white layer produced by cutting hardened steel and prediction of white layer thickness

    • Li Li
    • Debin Lai
    • Shengjian He

    Application 28 January 2021 Pages: 1215 - 1228