1. The effect of temperature alternating load on residual stresses for Al-Li alloy T-joints welded by dual laser beam bilateral synchronous welding

   • Shuhao Tian
   • Wenhua Chen
   • Xiaohong Zhan

   ORIGINAL ARTICLE 11 February 2020 Pages: 1 - 13

   

2. Influence of ingot rocking on the surface quality of multi-wire sawing monocrystalline silicon wafers

   • Zhenqin Xu
   • Yong Feng
   • Xiaolin Jia

   ORIGINAL ARTICLE 11 February 2020 Pages: 15 - 24

   

3. Forming of thin-walled AA6061-T4 tubular joint by elastomeric bulging: experiment and computation

   • Jingchao Yang
   • Heng Li
   • Sheng Yuan

   ORIGINAL ARTICLE 11 February 2020 Pages: 25 - 38

   

4. Study of the applicability of 22MnB5 sheet metal as protective masks to improve tool life in hot forging process

   • Luana De Lucca de Costa
   • Alberto Moreira Guerreiro Brito
   • Lirio Schaeffer

   ORIGINAL ARTICLE 11 February 2020 Pages: 39 - 47

   

5. Analytical modeling of part distortion in metal additive manufacturing

   • Jinqiang Ning
   • Maxwell Praniewicz
   • Steven Y. Liang

   ORIGINAL ARTICLE 12 February 2020 Pages: 49 - 57

   

6. Effect of ultrasonic vibration on thermal and material flow behavior, microstructure and mechanical properties of friction stir welded Al/Cu joints

   • Weihong Tian
   • Hao Su
   • Chuansong Wu

   ORIGINAL ARTICLE 12 February 2020 Pages: 59 - 71

   

7. On cutting temperatures in high and ultrahigh-speed machining

   • Guosheng Su
   • Xiaodong Xiao
   • Chonghai Xu

   ORIGINAL ARTICLE 12 February 2020 Pages: 73 - 83

   

8. Thermal error detection and compensation technology for spindle of horizontal CNC machine tool with large torque

   • Changyong Zhao
   • Yuanmeng Xia
   • Ya Fei

   ORIGINAL ARTICLE 12 February 2020 Pages: 85 - 96

   

9. Effect of the scanning speed on the microgroove formation regime in nanosecond-pulsed laser scanning ablation of cermet

   • Liang Liang
   • Jiandong Yuan
   • Guozhi Lin

   ORIGINAL ARTICLE 13 February 2020 Pages: 97 - 107

   

10. The effects of hot isostatic pressing (HIP) and solubilization heat treatment on the density, mechanical properties, and microstructure of austenitic stainless steel parts produced by selective laser melting (SLM)

    • Erica Liverani
    • Adrian H. A. Lutey
    • Alessandro Fortunato

    ORIGINAL ARTICLE 13 February 2020 Pages: 109 - 122

    

11. A model predictive path control algorithm of single-point incremental forming for non-convex shapes

    • An He
    • Michael P. Kearney
    • Paul A. Meehan

    ORIGINAL ARTICLE 13 February 2020 Pages: 123 - 143

    

12. Experiment on carbon fiber–reinforced plastic cutting by abrasive waterjet with specific emphasis on surface morphology

    • Xin Li
    • Xiaofeng Ruan
    • Zhengwen Chen

    ORIGINAL ARTICLE 13 February 2020 Pages: 145 - 156

    

13. Influences of gap pressure on machining performance in radial ultrasonic rolling electrochemical micromachining

    • Minghuan Wang
    • Xia Chen
    • Xindi Wang

    ORIGINAL ARTICLE 14 February 2020 Pages: 157 - 166

    

14. Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots

    • C. Zhang
    • M. Jahazi
    • R. Tremblay

    ORIGINAL ARTICLE 14 February 2020 Pages: 167 - 175

    

15. Densification, mechanical behaviors, and machining characteristics of 316L stainless steel in hybrid additive/subtractive manufacturing

    • Yuying Yang
    • Yadong Gong
    • Yunchao Xu

    ORIGINAL ARTICLE 14 February 2020 Pages: 177 - 189

    

16. Experimental and theoretical analysis of the thickness distribution in multistage two point incremental sheet forming

    • Xiaoqiang Li
    • Kai Han
    • Qing Li

    ORIGINAL ARTICLE 14 February 2020 Pages: 191 - 203

    

17. Effect of structural parameters of array of holes in the tube electrode for electrochemical cutting

    • Tao Yang
    • Yongbin Zeng
    • Shouye Li

    ORIGINAL ARTICLE 14 February 2020 Pages: 205 - 216

    

18. New drill-milling tools for novel drill-milling process of carbon fiber-reinforced plastics

    • Fei Su
    • Zhaohui Hu
    • Lei Zheng

    ORIGINAL ARTICLE 14 February 2020 Pages: 217 - 228

    

19. Effect of rivet die structure on the quality of riveted aircraft structures using slug rivet

    • Changyi Lei
    • Jiangxiong Li

    ORIGINAL ARTICLE 14 February 2020 Pages: 229 - 245

    

20. Accurate and efficient stability prediction for milling operations using the Legendre-Chebyshev-based method

    • Chengjin Qin
    • Jianfeng Tao
    • Chengliang Liu

    ORIGINAL ARTICLE 14 February 2020 Pages: 247 - 258

    

21. Research on the plastic fluidity of high-strength steel 22MnB5 based on the thermal-mechanical-fluid multi-filed coupling

    • Zhongde Shan
    • Fuzhen Sun
    • Lihui Lang

    ORIGINAL ARTICLE 14 February 2020 Pages: 259 - 270

    

22. Feasibility study of oil-on-water cooling in high-speed end milling of hardened steel

    • Shixiong Wu
    • Jundong Bi
    • Lijuan Zheng

    ORIGINAL ARTICLE 14 February 2020 Pages: 271 - 292

    

23. Characterization and optimization of the hydroforming process of AISI 316L steel hydraulic tubes

    • Alessandro Colpani
    • Antonio Fiorentino
    • Elisabetta Ceretti

    ORIGINAL ARTICLE 15 February 2020 Pages: 293 - 309

    

24. Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium

    • Karan S. Derekar
    • Adrian Addison
    • David Griffiths

    ORIGINAL ARTICLE 15 February 2020 Pages: 311 - 331

    

25. Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics

    • Frédéric Bédard
    • Mohammad Jahazi
    • Victor Songmene

    ORIGINAL ARTICLE 15 February 2020 Pages: 333 - 342

    

26. A realistic 3D finite element model for simulating multiple rotations of modified milling inserts using coupled temperature-displacement analysis

    • Muhammed Muaz
    • Sounak Kumar Choudhury

    ORIGINAL ARTICLE 15 February 2020 Pages: 343 - 354

    

27. Numerical simulation and experimental investigations on a three-roller setting round process for thin-walled pipes

    • Xueying Huang
    • Gaochao Yu
    • Rui Ma

    ORIGINAL ARTICLE 15 February 2020 Pages: 355 - 369

    

28. Effect of cutting and vibration parameters on the cutting performance of 7075-T651 aluminum alloy by ultrasonic vibration

    • Heng Luo
    • Youqiang Wang
    • Ping Zhang

    ORIGINAL ARTICLE 15 February 2020 Pages: 371 - 384

    

29. Deep neural network-based cost function for metal cutting data assimilation

    • Takashi Misaka
    • Jonny Herwan
    • Yoshiyuki Furukawa

    ORIGINAL ARTICLE 15 February 2020 Pages: 385 - 398

    

30. Micro-drilling characteristics of sequential glass fiber-reinforced resin-based/copper foil multi-layer sheets

    • Zimin Tang
    • Xin Huang
    • Lijuan Zheng

    ORIGINAL ARTICLE 15 February 2020 Pages: 399 - 410

    

31. Force compensation for precise positioning in machine tools via state observer design

    • Madihah Maharof
    • Zamberi Jamaludin
    • Chiew Tsung Heng

    ORIGINAL ARTICLE 15 February 2020 Pages: 411 - 423

    

32. Experimental study on tool wear in ultrasonic vibration–assisted milling of C/SiC composites

    • Yang Liu
    • Zhibing Liu
    • Tao Huang

    ORIGINAL ARTICLE 15 February 2020 Pages: 425 - 436

    

33. Effect of encapsulated hot isostatic pressing on properties of Ti6Al4V deposits produced by cold spray

    • P. Petrovskiy
    • A. Travyanov
    • I. Smurov

    ORIGINAL ARTICLE 15 February 2020 Pages: 437 - 449

    

34. Modeling of temperature distribution in turning of Ti-6Al-4V with liquid nitrogen cooling

    • Yongqing Wang
    • Jiaxin Liu
    • Minghua Dai

    ORIGINAL ARTICLE 15 February 2020 Pages: 451 - 462

    

35. Surface based variable thickness slicing modeling for laser metal deposition

    • Bo Xin
    • Xianxin Zhou
    • Yadong Gong

    ORIGINAL ARTICLE 16 February 2020 Pages: 463 - 474

    

36. A data-driven model for weld bead monitoring during the laser welding assisted by magnetic field

    • Longchao Cao
    • Lili Zhang
    • Yuda Wu

    ORIGINAL ARTICLE 17 February 2020 Pages: 475 - 487

    

37. Effect of tilt angle in FSW of polycarbonate sheets in butt configuration

    • F. Lambiase
    • V. Grossi
    • A. Paoletti

    ORIGINAL ARTICLE 17 February 2020 Pages: 489 - 501

    

38. A review on vibration analysis and control of machine tool feed drive systems

    • Haojin Yang
    • Zihao Wang
    • Fuxin Du

    ORIGINAL ARTICLE 17 February 2020 Pages: 503 - 525

    

39. Pose-dependent modal behavior of a milling robot in service

    • Asia Maamar
    • Vincent Gagnol
    • Laurent Sabourin

    ORIGINAL ARTICLE 17 February 2020 Pages: 527 - 533

    

40. Prediction of different design conditions on comprehensive performance of hydrostatic slide and experimental verification

    • Wanjiao Dong
    • Beizhi Li
    • Qinzhi Zhou

    ORIGINAL ARTICLE 17 February 2020 Pages: 535 - 547

    

41. Locating method and motion stroke design of flexible assembly tooling for multiple aircraft components

    • Feiyan Guo
    • Zhongqi Wang
    • Xudong Zhao

    ORIGINAL ARTICLE 17 February 2020 Pages: 549 - 571

    

42. A scan-wise adaptive remeshing framework for thermal simulation of the selective laser melting process

    • Alaa Olleak
    • Zhimin Xi

    ORIGINAL ARTICLE 17 February 2020 Pages: 573 - 584

    

43. Ultrasonic spot welding of aluminum to copper: a review

    • Z. L. Ni
    • J. J. Yang
    • F. X. Ye

    ORIGINAL ARTICLE 17 February 2020 Pages: 585 - 606

    

44. Base part centered assembly task precedence generation

    • João Costa Mateus
    • Dieter Claeys
    • El-Houssaine Aghezzaf

    ORIGINAL ARTICLE 18 February 2020 Pages: 607 - 616

    

45. Surface integrity enhancement of ZL109 aluminum-silicon piston alloy employing the forward and reverse finish cutting method

    • Hu Sun
    • Anhai Li
    • Chaoyi Xue

    ORIGINAL ARTICLE 18 February 2020 Pages: 617 - 629

    

46. Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

    • Guochao Li
    • Si Li
    • Kunpeng Zhu

    ORIGINAL ARTICLE 18 February 2020 Pages: 631 - 643

    

47. The wear of 3D microelectrode in micro electrical discharge machining

    • Bin Xu
    • Sheng-gui Chen
    • Li-kuan Zhu

    ORIGINAL ARTICLE 18 February 2020 Pages: 645 - 651

    

48. Fast heat conduction-based thermal error control technique for spindle system of machine tools

    • Hao Zhou
    • Kaiguo Fan
    • Rui Gao

    ORIGINAL ARTICLE 18 February 2020 Pages: 653 - 666

    

49. A multiple alternative processes-based cost-tolerance optimal model for aircraft assembly

    • Tao Jing
    • Xitian Tian
    • Bo Li

    ORIGINAL ARTICLE 18 February 2020 Pages: 667 - 677

    

50. Synthesis and characterization of non-equiatomic Ti_0.3AlMoSi_0.3W_0.1 high-entropy alloy fabricated via spark plasma sintering

    • L. R. Kanyane
    • A. P. I. Popoola
    • M. B. Shongwe

    ORIGINAL ARTICLE 19 February 2020 Pages: 679 - 688