1. Development and validation of a new friction model for cutting processes

   • Bingxiao Peng
   • Thomas Bergs
   • Fritz Klocke

   ORIGINAL ARTICLE 25 January 2020 Pages: 4357 - 4369

   

2. Correction to: Development and validation of a new friction model for cutting processes

   • Bingxiao Peng
   • Thomas Bergs
   • Fritz Klocke

   Correction 30 April 2020 Pages: 4371 - 4371

3. Behavior of austempered ductile iron (ADI) grinding using different MQL dilutions and CBN wheels with low and high friability

   • Andrigo Elisiario da Silva
   • José Claudio Lopes
   • Eduardo Carlos Bianchi

   ORIGINAL ARTICLE 27 April 2020 Pages: 4373 - 4387

   

4. Role of elongational viscosity of feedstock in extrusion-based additive manufacturing of powder-binder mixtures

   • Kedarnath Rane
   • Thierry Barriere
   • Matteo Strano

   ORIGINAL ARTICLE 27 April 2020 Pages: 4389 - 4402

   

5. Study on effects of electrode material and dielectric medium on arc plasma in electrical discharge machining

   • Xiaohui Li
   • Dongbo Wei
   • Xiaodong Yang

   ORIGINAL ARTICLE 27 April 2020 Pages: 4403 - 4413

   

6. Grinding performance by applying MQL technique: an approach of the wheel cleaning jet compared with wheel cleaning Teflon and Alumina block

   • Fernando Sabino Fonteque Ribeiro
   • José Claudio Lopes
   • Eduardo Carlos Bianchi

   ORIGINAL ARTICLE 27 April 2020 Pages: 4415 - 4426

   

7. High deposition efficiency and delamination issues during high-pressure cold spraying metallization of PEEK using spherical copper powders

   • Libin Lalu Koithara
   • Rija Nirina Raoelison
   • Xinliang Xie

   ORIGINAL ARTICLE 28 April 2020 Pages: 4427 - 4436

   

8. Twinned-serrated chip formation with minor shear bands in ultra-precision micro-cutting of bulk metallic glass

   • Sau Yee Chau
   • Suet To
   • Hongbing Wu

   ORIGINAL ARTICLE 28 April 2020 Pages: 4437 - 4448

   

9. The compressive behaviour of ABS gyroid lattice structures manufactured by fused deposition modelling

   • Tobias Maconachie
   • Rance Tino
   • Martin Leary

   ORIGINAL ARTICLE 28 April 2020 Pages: 4449 - 4467

   

10. Focused ion beam milling for prototyping 2D and 3D photonic structures

    • Karen Sloyan
    • Henrik Melkonyan
    • Marcus S. Dahlem

    ORIGINAL ARTICLE 28 April 2020 Pages: 4469 - 4480

    

11. A parametric study of 3D printed polymer gears

    • Ye Zhang
    • Ken Mao
    • Guotao Ma

    ORIGINAL ARTICLE Open access 28 April 2020 Pages: 4481 - 4492

    

12. Non-linear Wiener process–based cutting tool remaining useful life prediction considering measurement variability

    • Huibin Sun
    • Junlin Pan
    • Dali Cao

    ORIGINAL ARTICLE 28 April 2020 Pages: 4493 - 4502

    

13. An investigation into the abrasive waterjet milling circular pocket on titanium alloy

    • Yemin Yuan
    • Jianfeng Chen
    • Xuanping Wang

    ORIGINAL ARTICLE 28 April 2020 Pages: 4503 - 4515

    

14. Computer aided simulation and performance evaluation of additive manufacturing technology for component parts manufacturing

    • Ilesanmi Daniyan
    • Khumbulani Mpofu
    • Moses Oyesola

    ORIGINAL ARTICLE 28 April 2020 Pages: 4517 - 4530

    

15. Modeling and assessment of broaching tool with grooves on the flank face

    • Jing Ni
    • Yu Shi
    • Zhen Meng

    ORIGINAL ARTICLE 29 April 2020 Pages: 4531 - 4543

    

16. Body diagonal error measurement and evaluation of a multiaxis machine tool using a multibeam laser interferometer

    • Guangming Sun
    • Gaiyun He
    • Wenjie Tian

    ORIGINAL ARTICLE 30 April 2020 Pages: 4545 - 4559

    

17. On the forming uniformity during a single layer forming of electromagnetic incremental forming

    • Hongliang Su
    • Liang Huang
    • Fei Ma

    ORIGINAL ARTICLE 30 April 2020 Pages: 4561 - 4572

    

18. Thermal modeling of single discharge in prospect of tool wear compensation in μEDM

    • Rahul Nadda
    • Chandrakant Kumar Nirala

    ORIGINAL ARTICLE 01 May 2020 Pages: 4573 - 4595

    

19. Determination of elastic constants of additive manufactured Inconel 625 specimens using an ultrasonic technique

    • H. R. Javidrad
    • Sina Salemi

    ORIGINAL ARTICLE 01 May 2020 Pages: 4597 - 4607

    

20. Taguchi method for optimizing process parameters in the production of activated carbon from rubber seed shell

    • Barlin Oemar
    • Wei-Chin Chang

    ORIGINAL ARTICLE 01 May 2020 Pages: 4609 - 4620

    

21. Analysis of defect formation mechanisms and their effects on weld strength during friction stir welding of Al 6061-T6 via experiments and finite element modeling

    • Abhishek Ajri
    • Nitin Rohatgi
    • Yung C. Shin

    ORIGINAL ARTICLE 01 May 2020 Pages: 4621 - 4635

    

22. Manufacturing aluminum/polybutylene terephthalate direct joints by using hot water–treated aluminum via injection molding

    • Shuaijie Zhao
    • Fuminobu Kimura
    • Yusuke Kajihara

    ORIGINAL ARTICLE 01 May 2020 Pages: 4637 - 4644

    

23. A prediction model for the milling of thin-wall parts considering thermal-mechanical coupling and tool wear

    • Ge Wu
    • Guangxian Li
    • Songlin Ding

    ORIGINAL ARTICLE 01 May 2020 Pages: 4645 - 4659

    

24. Surface finishing and enhancement of Ni-based alloy using sliding burnishing with active rotary tool

    • Masato Okada
    • Shin Terada
    • Masaaki Otsu

    ORIGINAL ARTICLE 02 May 2020 Pages: 4661 - 4676

    

25. Numerical studies of metal particle behaviors inside the selective laser melting (SLM) chamber through computational fluid dynamics (CFD)

    • Sz-Jia Tzeng
    • Xiang-Xin Chen
    • Wei-Cheng Wang

    ORIGINAL ARTICLE 02 May 2020 Pages: 4677 - 4686

    

26. Revolution on digital twin technology—a patent research approach

    • Kung-Jeng Wang
    • Tsung-Lun Lee
    • Yuling Hsu

    ORIGINAL ARTICLE 02 May 2020 Pages: 4687 - 4704

    

27. Investigation of transverse shrinkage and angular distortion caused by hybrid laser-arc welding

    • Camila Albuquerque Fernandes
    • Natália Lopes do Vale
    • Severino Leopoldino Urtiga Filho

    ORIGINAL ARTICLE 03 May 2020 Pages: 4705 - 4711

    

28. Recast layer removal of 304 stainless steel by combining micro-EDM with negative polarity micro-EDM

    • Bin Xu
    • Sheng-gui Chen
    • Li-kuan Zhu

    ORIGINAL ARTICLE 03 May 2020 Pages: 4713 - 4723

    

29. Influence of the different variants of the surface treatment on the durability of forging dies made of Unimax steel

    • Marek Hawryluk
    • Daniel Dobras
    • Jacek Ziemba

    ORIGINAL ARTICLE Open access 04 May 2020 Pages: 4725 - 4739

    

30. Mechanism of reduction of damage during helical milling of titanium/CFRP/aluminium stacks

    • Lei Sun
    • Hang Gao
    • Shujuan Ma

    ORIGINAL ARTICLE 05 May 2020 Pages: 4741 - 4753

    

31. Experimental study on the low-feed grooving process with different grooving tools

    • Jialu Xu
    • Fuzeng Wang
    • Wenkun Lin

    ORIGINAL ARTICLE 05 May 2020 Pages: 4755 - 4766

    

32. Influence of welding parameters on morphology and mechanical performance of friction spot pressure welded thin monomer cast nylon 6 sheets

    • Yinfei Yan
    • Yifu Shen
    • Junping Li

    ORIGINAL ARTICLE 06 May 2020 Pages: 4767 - 4775

    

33. Research on outer diameter measurement method of ring forging based on standard deviation resampling

    • Yu-cun Zhang
    • Wen-wen Zhang
    • Tao Kong

    ORIGINAL ARTICLE 06 May 2020 Pages: 4777 - 4784

    

34. Continuous casting control via drive monitoring

    • I. Barankova Inna
    • V. Mikhailova Uliana
    • V. Konovalov Maksim

    ORIGINAL ARTICLE 07 May 2020 Pages: 4785 - 4795

    

35. Exploring a new method to obtain the 3D abrasive water jet profile

    • Shijin Zhang
    • Lidanyang Ji
    • Wenkang Zhou

    ORIGINAL ARTICLE 07 May 2020 Pages: 4797 - 4809

    

36. Single grain grinding: a novel approach to model the interactions at the grain/bond interface during grinding

    • Berend Denkena
    • Abdelhamid Bouabid
    • Alexander Kroedel

    ORIGINAL ARTICLE Open access 07 May 2020 Pages: 4811 - 4822

    

37. Effects of cold rolling and annealing on the ridging behaviour of ferritic stainless steel

    • Xiaoguang Ma
    • Jingwei Zhao
    • Zhengyi Jiang

    ORIGINAL ARTICLE 07 May 2020 Pages: 4823 - 4836

    

38. Technical data-driven tool condition monitoring challenges for CNC milling: a review

    • Shi Yuen Wong
    • Joon Huang Chuah
    • Hwa Jen Yap

    ORIGINAL ARTICLE 07 May 2020 Pages: 4837 - 4857

    

39. From tolerance allocation to tolerance-cost optimization: a comprehensive literature review

    • Martin Hallmann
    • Benjamin Schleich
    • Sandro Wartzack

    ORIGINAL ARTICLE Open access 08 May 2020 Pages: 4859 - 4912

    

40. Effects of the scanning strategy on the microstructure and mechanical properties of a TiAl6V4 alloy produced by electron beam additive manufacturing

    • Carlo Alberto Biffi
    • Jacopo Fiocchi
    • Ausonio Tuissi

    ORIGINAL ARTICLE 08 May 2020 Pages: 4913 - 4924

    

41. Analytical and experimental investigations of optimum thermomechanical conditions to use tools with non-circular pin in friction stir welding

    • Stephen Leon J
    • Bharathiraja G
    • Jayakumar V

    ORIGINAL ARTICLE 08 May 2020 Pages: 4925 - 4937

    

42. Friction improvement via grinding wheel texturing by dressing

    • Maria Garcia Moreno
    • Jorge Álvarez Ruiz
    • Leire Godino Fernández

    ORIGINAL ARTICLE 08 May 2020 Pages: 4939 - 4954

    

43. An efficient full-discretization method for milling stability prediction

    • HongYing Zhi
    • TangSheng Zhang
    • Xianguo Yan

    ORIGINAL ARTICLE 08 May 2020 Pages: 4955 - 4967

    

44. Experimental and finite element analysis of the formation mechanism of serrated chips of nickel-based superalloy Inconel 718

    • Junli Li
    • Zhengrui Tao
    • Ming Chen

    ORIGINAL ARTICLE 08 May 2020 Pages: 4969 - 4982

    

45. Effect of laser patterning on the material behaviour of 22MnB5 steel with induced local strengthening

    • Hyung-gyu Kim
    • Hye-Jin Lee
    • Jonghun Yoon

    ORIGINAL ARTICLE 08 May 2020 Pages: 4983 - 4994

    

46. Experimental study on controlled pulse keyholing plasma arc welding assisted by ultrasonic vibration

    • Lin Wang
    • Cheng Zhang
    • Chuansong Wu

    ORIGINAL ARTICLE 09 May 2020 Pages: 4995 - 5009

    

47. Effect of weld travel speed on solidification cracking behavior. Part 1: weld metal characteristics

    • N. Coniglio
    • C. E. Cross

    ORIGINAL ARTICLE 29 April 2020 Pages: 5011 - 5023

    

48. Effect of weld travel speed on solidification cracking behavior. Part 2: testing conditions and metrics

    • N. Coniglio
    • C. E. Cross

    ORIGINAL ARTICLE 15 April 2020 Pages: 5025 - 5038

    

49. Effect of weld travel speed on solidification cracking behavior. Part 3: modeling

    • N. Coniglio
    • C. E. Cross

    ORIGINAL ARTICLE 23 April 2020 Pages: 5039 - 5051