1. Generation of a 3D error compensation grid from ISO 230-1 error parameters obtained by a SAMBA indirect calibration and validated by a ball-bar spherical test

   • Sareh M. Esmaeili
   • J.R.R. Mayer

   ORIGINAL ARTICLE 23 January 2020 Pages: 4649 - 4662

   

2. Material removal mechanism of superalloy Inconel 718 based on electrochemical abrasive jet processing

   • Yong Zhang
   • Qi Wang
   • Shijie Rao

   ORIGINAL ARTICLE 24 January 2020 Pages: 4663 - 4673

   

3. Determination of minimum uncut chip thickness and size effects in micro-milling of P-20 die steel using surface quality and process signal parameters

   • Priyabrata Sahoo
   • Karali Patra
   • Aleksandr A. Dyakonov

   ORIGINAL ARTICLE 24 January 2020 Pages: 4675 - 4691

   

4. Prediction of residual stress in the process of turning high strength alloy steel by innovative coated carbide microgroove tools

   • Hongwan Jiang
   • Lin He
   • Sen Yuan

   ORIGINAL ARTICLE 25 January 2020 Pages: 4693 - 4705

   

5. Numerical study on variation of chord modulus on the springback of high-strength steels

   • Sérgio Fernando Lajarin
   • Ravilson Antonio Chemin Filho
   • Paulo Victor Prestes Marcondes

   ORIGINAL ARTICLE 25 January 2020 Pages: 4707 - 4713

   

6. Surface quality in axial ultrasound plunging-type grinding of bearing internal raceway

   • Bo Zhao
   • Xingchen Guo
   • Xiaobo Wang

   ORIGINAL ARTICLE 25 January 2020 Pages: 4715 - 4730

   

7. An improved machine tool volumetric error compensation method based on linear and squareness error correction method

   • Weiguo Gao
   • Lingtao Weng
   • Jinhe Li

   ORIGINAL ARTICLE 25 January 2020 Pages: 4731 - 4744

   

8. Study on the grinding technology and measure method for planar enveloping hourglass worm

   • Yan Chen
   • Guofu Yin
   • Fang Wang

   ORIGINAL ARTICLE 27 January 2020 Pages: 4745 - 4754

   

9. Effects of compound diamond slurry with graphene for lapping of sapphire wafers

   • Hsien-Kuang Liu
   • Chao-Chang A. Chen
   • Wei-Chung Chen

   ORIGINAL ARTICLE 27 January 2020 Pages: 4755 - 4768

   

10. Corrosion performance of nanocomposite coatings in moist SO₂ environment

    • Ashish K. Kasar
    • Muhammad U. Bhutta
    • Pradeep L. Menezes

    ORIGINAL ARTICLE 28 January 2020 Pages: 4769 - 4776

    

11. Application of k-means clustering for temperature timing characteristics in breakout prediction during continuous casting

    • Haiyang Duan
    • Xudong Wang
    • Qingtao Guo

    ORIGINAL ARTICLE 28 January 2020 Pages: 4777 - 4787

    

12. Analysis and design of coaxial nozzle with rectangular outlet for high power diode laser in laser metal deposition

    • Mao Ni
    • Xunpeng Qin
    • Zeqi Hu

    ORIGINAL ARTICLE 28 January 2020 Pages: 4789 - 4803

    

13. Improvement of tribo-mechanical properties of directionally solidified CM-247 LC nickel-based super alloy through laser material processing

    • N. Jeyaprakash
    • Che-Hua Yang

    ORIGINAL ARTICLE 28 January 2020 Pages: 4805 - 4814

    

14. Cement-based additive manufacturing: experimental investigation of process quality

    • Panagis Foteinopoulos
    • Vivien Esnault
    • Panagiotis Stavropoulos

    ORIGINAL ARTICLE Open access 28 January 2020 Pages: 4815 - 4826

    

15. Robotic grasping and alignment for small size components assembly based on visual servoing

    • Yanqin Ma
    • Xilong Liu
    • Wenrong Wu

    ORIGINAL ARTICLE 28 January 2020 Pages: 4827 - 4843

    

16. Attainment of high corner accuracy for thin-walled sharp-corner part by WEDM based on magnetic field-assisted method and parameter optimization

    • Hongzhi Yan
    • Kabongo Djo Bakadiasa
    • Fenglin Han

    ORIGINAL ARTICLE 28 January 2020 Pages: 4845 - 4857

    

17. Experimental investigation of shot peening: correlation of pressure and shot velocity to Almen intensity

    • Augustine Teo
    • Kunal Ahluwalia
    • Ampara Aramcharoen

    ORIGINAL ARTICLE 28 January 2020 Pages: 4859 - 4868

    

18. Experimental and numerical investigations on size effect of friction in meso-/micro-forming without lubricant

    • Juanjuan Han
    • Yao Lin
    • Guangchun Wang

    ORIGINAL ARTICLE 28 January 2020 Pages: 4869 - 4877

    

19. A path planning and sharp corner correction strategy for wire and arc additive manufacturing of solid components with polygonal cross-sections

    • H. H. Liu
    • T. Zhao
    • J. F. Yue

    ORIGINAL ARTICLE 28 January 2020 Pages: 4879 - 4889

    

20. An approach to torque and temperature thread by thread on tapping

    • Igor Cézar Pereira
    • Pedro Ivo Vianello
    • Marcio Bacci da Silva

    ORIGINAL ARTICLE 28 January 2020 Pages: 4891 - 4901

    

21. A new metric for assessing the surface roughness of agate plates cut by abrasive water jet

    • Carlos Edmundo de Abreu e Lima Ipar
    • Patric Daniel Neis
    • Thomas Felipe Zibetti

    ORIGINAL ARTICLE 28 January 2020 Pages: 4903 - 4912

    

22. Multi-objective parameter optimization to support energy-efficient peck deep-hole drilling processes with twist drills

    • Zhongwei Zhang
    • Lihui Wu
    • Tao Peng

    ORIGINAL ARTICLE 29 January 2020 Pages: 4913 - 4932

    

23. Processing of poly-l-lactide and poly(l-lactide-co-trimethylene carbonate) blends by fused filament fabrication and fused granulate fabrication using RepRap 3D printer

    • Jakub Marchewka
    • Jadwiga Laska

    ORIGINAL ARTICLE Open access 29 January 2020 Pages: 4933 - 4944

    

24. A cloud-based resource planning tool for the production and installation of industrial product service systems (IPSS)

    • Dimitris Mourtzis
    • Evagoras Zervas
    • Pietro Pittaro

    ORIGINAL ARTICLE 29 January 2020 Pages: 4945 - 4963

    

25. An optimization approach for setup planning and operation sequencing with tolerance constraints

    • Wenbo Wu
    • Zhengdong Huang
    • Yongfu Chen

    ORIGINAL ARTICLE 29 January 2020 Pages: 4965 - 4985

    

26. Inconel 718 machining performance evaluation using indigenously developed hybrid machining facilities: experimental investigation and sustainability assessment

    • Navneet Khanna
    • Prassan Shah
    • Hussien Hegab

    ORIGINAL ARTICLE 29 January 2020 Pages: 4987 - 4999

    

27. Thermal error modeling of gear hobbing machine based on IGWO-GRNN

    • Zihui Liu
    • Bo Yang
    • Yefeng Yang

    ORIGINAL ARTICLE 30 January 2020 Pages: 5001 - 5016

    

28. Effect of fiber orientation angles on the material removal behavior of CFRP during cutting process by multi-scale characterization

    • Chen Rong
    • Li Shujian
    • Jiang Yong

    ORIGINAL ARTICLE 30 January 2020 Pages: 5017 - 5031

    

29. Study on arc plasma movement and its effect on crater morphology during single-pulse discharge in EDM

    • Qi Li
    • Xiaodong Yang

    ORIGINAL ARTICLE 30 January 2020 Pages: 5033 - 5047

    

30. An early fault elimination method of computerized numerical control machine tools

    • Xiaogang Zhang
    • Yulong Li
    • Yan Ran

    ORIGINAL ARTICLE 30 January 2020 Pages: 5049 - 5059

    

31. Analysis of the surface roughness obtained by the abrasive flow machining process using an abrasive paste with oiticica oil

    • Marcelo Rodrigo Munhoz
    • Larissa Galante Dias
    • Carlos Elias da Silva Júnior

    ORIGINAL ARTICLE 30 January 2020 Pages: 5061 - 5070

    

32. Influences of shape of the new interfaces and morphology of the intermetallics on mechanical properties of aluminum AA2024–pure copper joints by friction stir welding

    • R. Anbukkarasi
    • Satish V. Kailas

    ORIGINAL ARTICLE 31 January 2020 Pages: 5071 - 5083

    

33. Prediction of strain path and forming limit curve of AHSS by incorporating microstructure evolution

    • Shanta Chakrabarty
    • Marrapu Bhargava
    • Sushil K. Mishra

    ORIGINAL ARTICLE 31 January 2020 Pages: 5085 - 5098

    

34. Analytical model for delamination of CFRP during drilling of CFRP/metal stacks

    • Zhen-yuan Jia
    • Chen Chen
    • Qi Wang

    ORIGINAL ARTICLE 01 February 2020 Pages: 5099 - 5109

    

35. Combined “mesh flow” and “re-meshing” technique for coupled magnetic-mechanical problem on electromagnetic forming process

    • She Li
    • Xiangyang Cui

    ORIGINAL ARTICLE 03 February 2020 Pages: 5111 - 5127

    

36. Effects of the exposition of an autoclave prepreg to the processing environment on its properties, curing cycle and final composite behavior

    • Olivia de Andrade Raponi
    • Lorena Cristina Miranda Barbosa
    • Alessandro Guimarães

    ORIGINAL ARTICLE 03 February 2020 Pages: 5129 - 5136

    

37. Influence of printing parameters on structures, mechanical properties and surface characterization of aluminium alloy manufactured using selective laser melting

    • Rajkumar Subbiah
    • Joseph Bensingh
    • Sanjay Nayak

    ORIGINAL ARTICLE 04 February 2020 Pages: 5137 - 5147

    

38. Study on die-less spinning of square section cone with fillets

    • Z. Jia
    • Z. J. Fan
    • Z. R. Han

    ORIGINAL ARTICLE 04 February 2020 Pages: 5149 - 5157

    

39. A new approach to identify geometric errors directly from the surface topography of workpiece in ultra-precision machining

    • Hongfei Tao
    • Ran Chen
    • Tielin Shi

    ORIGINAL ARTICLE 04 February 2020 Pages: 5159 - 5173

    

40. A GPU-based prediction and simulation method of grinding surface topography for belt grinding process

    • Hai-Long Xie
    • Qing-Hui Wang
    • Jing-Rong Li

    ORIGINAL ARTICLE 04 February 2020 Pages: 5175 - 5186

    

41. Atmospheric pressure plasma-assisted precision turning of pure iron material

    • Xin Liu
    • Fan Zhang
    • Jing Sun

    ORIGINAL ARTICLE 04 February 2020 Pages: 5187 - 5197

    

42. Application of intelligent water drop algorithm in process planning optimization

    • Bo Gao
    • Xiaoyu Hu
    • Yubo Song

    ORIGINAL ARTICLE 05 February 2020 Pages: 5199 - 5211

    

43. Numerical simulation and experimental validation of the welding operation of the railcar bogie frame to prevent distortion

    • Ilesanmi Daniyan
    • Khumbulani Mpofu
    • Adefemi Adeodu

    ORIGINAL ARTICLE 05 February 2020 Pages: 5213 - 5224

    

44. Depth of dressing optimization in CBN wheels of different friabilities using acoustic emission (AE) technique

    • Felipe Aparecido Alexandre
    • José Claudio Lopes
    • Eduardo Carlos Bianchi

    ORIGINAL ARTICLE 05 February 2020 Pages: 5225 - 5240

    

45. Mechanical and cutting performance of cemented carbide tools with Cr/x/DLC composite coatings

    • Tianmei Hao
    • Jin Du
    • Jingjie Zhang

    ORIGINAL ARTICLE 05 February 2020 Pages: 5241 - 5254

    

46. Force modeling for polishing aero-engine blades with abrasive cloth wheels

    • Chao Xian
    • Yaoyao Shi
    • De Liu

    ORIGINAL ARTICLE 05 February 2020 Pages: 5255 - 5267

    

47. Micro EDM aided by ultrasonic vibration in nitrogen plasma jet and mist

    • Congyang Zhang
    • Rimao Zou
    • Wataru Natsu

    ORIGINAL ARTICLE 05 February 2020 Pages: 5269 - 5276

    

48. Research on milling hole of AFRP based on cryogenic cooling processing

    • Fengbiao Wang
    • Yongqing Wang

    ORIGINAL ARTICLE 06 February 2020 Pages: 5277 - 5287

    

49. Experimental investigation and optimisation of the micro milling process of hardened hot-work tool steel

    • B. Z. Balázs
    • M. Takács

    ORIGINAL ARTICLE Open access 06 February 2020 Pages: 5289 - 5305

    

50. Active-passive filling friction stir repairing of casting defects in ZL210 aluminum alloys

    • Qi Wen
    • Ruixiu Guo
    • Kang Yang

    ORIGINAL ARTICLE 06 February 2020 Pages: 5307 - 5315