1. Numerical modeling of bronze coating formation using concentration-dependent diffusivity

   • G. G. Damaceno
   • O. A. Ojo

   ORIGINAL ARTICLE 12 July 2017 Pages: 2997 - 3003

2. An improved cutting force model for micro milling considering machining dynamics

   • Wanqun Chen
   • Xiangyu Teng
   • Quanlong Wang

   ORIGINAL ARTICLE Open access 12 July 2017 Pages: 3005 - 3016

3. In-situ and in-process monitoring of optical glass grinding process based on image processing technique

   • Yong Jie Zhao
   • Hao Nan Li
   • Yun Hui Yan

   ORIGINAL ARTICLE 12 July 2017 Pages: 3017 - 3031

4. Effect of pulsed magnetic field on the grain refinement and mechanical properties of 6063 aluminum alloy by direct chill casting

   • Hang Li
   • Shichao Liu
   • Tingju Li

   ORIGINAL ARTICLE 12 July 2017 Pages: 3033 - 3042

5. Research on electrochemical discharge-assisted diamond wire cutting of insulating ceramics

   • Jin Wang
   • Li Sun
   • Zhixin Jia

   ORIGINAL ARTICLE 12 July 2017 Pages: 3043 - 3051

6. Experimental research on strain-hardening effect of 40CrMnMo in turning process based on the Oxley-Welsh theory

   • Hongwan Jiang
   • Lin He
   • Gang Zhan

   ORIGINAL ARTICLE 12 July 2017 Pages: 3053 - 3061

7. A novel technique for dressing metal-bonded diamond grinding wheel with abrasive waterjet and touch truing

   • Zhenzhong Zhang
   • Peng Yao
   • Hongtao Zhu

   ORIGINAL ARTICLE 12 July 2017 Pages: 3063 - 3073

8. Single and multiobjective optimization of Inconel 718 nickel-based superalloy in the wire electrical discharge machining

   • Ching-Been Yang
   • Cang-Ge Lin
   • Chein-Chung Chen

   ORIGINAL ARTICLE 13 July 2017 Pages: 3075 - 3084

9. Study on the inner surface finishing of irregular spatial elbow pipe by the centerline reconstruction

   • ZhengHao Yu
   • Bing Han
   • ZhengWei Yan

   ORIGINAL ARTICLE 13 July 2017 Pages: 3085 - 3093

10. Optimal designing of multiple deferred state sampling plan for assuring percentile life under Weibull distribution

    • S. Balamurali
    • P. Jeyadurga
    • M. Usha

    ORIGINAL ARTICLE 13 July 2017 Pages: 3095 - 3109

11. Influence of laser heat treatment on microstructure and properties of surface layer of Waspaloy aimed for laser-assisted machining

    • Damian Przestacki
    • Mateusz Kukliński
    • Aneta Bartkowska

    ORIGINAL ARTICLE Open access 13 July 2017 Pages: 3111 - 3123

12. Friction stir weld-bonding defect inspection using phased array ultrasonic testing

    • J. Fortunato
    • Chirag Anand
    • V. Infante

    ORIGINAL ARTICLE 13 July 2017 Pages: 3125 - 3134

13. Design and dynamic optimization of an ultra-precision micro grinding machine tool for flexible joint blade machining

    • Wei Li
    • Beizhi Li
    • Jianguo Yang

    ORIGINAL ARTICLE 13 July 2017 Pages: 3135 - 3147

14. Experimental investigation on the formation behavior for three-layer metal sheets under laser high speed flexible micro-forming

    • Wenhao Zhang
    • Huixia Liu
    • Xiao Wang

    ORIGINAL ARTICLE 13 July 2017 Pages: 3149 - 3157

15. Effects of laser parameters on optoelectronic properties of polycrystalline silicon films prepared by two-step annealing process

    • H. K. Lin
    • U. G. Huang
    • S. Z. Hong

    ORIGINAL ARTICLE 13 July 2017 Pages: 3159 - 3163

16. Fundamental understanding of the interaction of continuous wave laser with aluminium

    • Júlio Coroado
    • Sónia Meco
    • Eurico Assunção

    ORIGINAL ARTICLE Open access 13 July 2017 Pages: 3165 - 3174

17. Exergy analysis and multi-objective optimization of air cooling system for dry machining

    • Libin Zhu
    • Huajun Cao
    • Xiao Yang

    ORIGINAL ARTICLE 13 July 2017 Pages: 3175 - 3188

18. FE modeling of warm flanging process of large T-pipe from thick-wall cylinder

    • Ning-Yu Ben
    • Da-Wei Zhang
    • Sheng-Dun Zhao

    ORIGINAL ARTICLE 13 July 2017 Pages: 3189 - 3201

19. Experimental study of fibre laser microdrilling of aerospace superalloy by trepanning technique

    • F. Tagliaferri
    • S. Genna
    • G. De Chiara

    ORIGINAL ARTICLE 14 July 2017 Pages: 3203 - 3210

20. A new approach in producing metal bellows by local arc heating: a parametric study

    • M. Sedighi
    • M. Shamsi

    ORIGINAL ARTICLE 14 July 2017 Pages: 3211 - 3219

21. Electrochemical machining of blades with cross-structural cathodes at leading/trailing edges

    • Dong Zhu
    • Jibin Zhao
    • Lingguo Yu

    ORIGINAL ARTICLE 14 July 2017 Pages: 3221 - 3228

22. Investigation of sensitivity analysis and compensation parameter optimization of geometric error for five-axis machine tool

    • Shijie Guo
    • Gedong Jiang
    • Xuesong Mei

    ORIGINAL ARTICLE 14 July 2017 Pages: 3229 - 3243

23. Finite element simulation analysis of laminated sheets in deep drawing process using response surface method

    • Seyyed Joneid Hasan Nejad
    • Rezgar Hasanzadeh
    • Vahid Modanloo

    Original Article 14 July 2017 Pages: 3245 - 3259

24. The temperature field study on the annular heat source model in large surface grinding by cup wheel

    • Ruiqin Wang
    • Shijie Dai
    • Yafan Dong

    ORIGINAL ARTICLE 15 July 2017 Pages: 3261 - 3273

25. Experimental research and numerical simulation of the punch forming of aluminum foil based on a laser-induced cavitation bubble

    • T. N. Chen
    • Z. N. Guo
    • H. H. Li

    ORIGINAL ARTICLE 15 July 2017 Pages: 3275 - 3284

26. Crystallinity, surface morphology, and chemical composition of the recast layer and rutile-TiO₂ formation on Ti-6Al-4V ELI by wire-EDM to enhance biocompatibility

    • Saadman Sakib Rahman
    • Md. Zurais Ibne Ashraf
    • M. M. Hossain

    ORIGINAL ARTICLE 15 July 2017 Pages: 3285 - 3296

27. Assembly sequence planning considering the effect of assembly resources with a discrete fireworks algorithm

    • Cong Lu
    • Jun-Ying Li

    ORIGINAL ARTICLE 15 July 2017 Pages: 3297 - 3314

28. Shot peening as a pre-treatment to anodic oxidation coating process of AW 6082 aluminum for fatigue life improvement

    • Branislav Hadzima
    • František Nový
    • Stanislava Fintová

    ORIGINAL ARTICLE 15 July 2017 Pages: 3315 - 3323

29. Prediction of bending force in the hot strip rolling process using artificial neural network and genetic algorithm (ANN-GA)

    • Zhen-Hua Wang
    • Dian-Yao Gong
    • Dian-Hua Zhang

    ORIGINAL ARTICLE 15 July 2017 Pages: 3325 - 3338

30. An approach for optimization of turning parameters considering uncertainty parameters

    • Xianzhen Huang
    • Mingwei Hu
    • Yimin Zhang

    ORIGINAL ARTICLE 15 July 2017 Pages: 3339 - 3346

31. A life cycle approach to characterizing carbon efficiency of cutting tools

    • Benjie Li
    • Huajun Cao
    • Salman Jafar

    ORIGINAL ARTICLE 15 July 2017 Pages: 3347 - 3355

32. Microstructural morphology and evolution of austenite stainless steel deposited using pulsed laser and wire

    • Jiang-zhou Su
    • Mu-zheng Xiao
    • Yi-chong Yang

    ORIGINAL ARTICLE 17 July 2017 Pages: 3357 - 3370

33. Monolithic 3D labs- and organs-on-chips obtained by lithography-based ceramic manufacture

    • Andrés Díaz Lantada
    • Adrián de Blas Romero
    • Josefa Predestinación García-Ruíz

    ORIGINAL ARTICLE Open access 17 July 2017 Pages: 3371 - 3381

34. Five-axis abrasive belt flap wheel polishing method for leading and trailing edges of aero-engine blade

    • Junfeng Zhang
    • Yaoyao Shi
    • Zhishan Li

    ORIGINAL ARTICLE 17 July 2017 Pages: 3383 - 3393

35. An accurate characterization method to tracing the geometric defect of the machined surface for complex five-axis machine tools

    • Dongju Chen
    • Hao Wang
    • Qiang Cheng

    ORIGINAL ARTICLE 17 July 2017 Pages: 3395 - 3408

36. Laser deposition-additive manufacturing of in situ TiB reinforced titanium matrix composites: TiB growth and part performance

    • Yingbin Hu
    • Fuda Ning
    • Yuzhou Li

    ORIGINAL ARTICLE 18 July 2017 Pages: 3409 - 3418

37. Experimental study on the cutting temperature of textured carbide tool embedded with graphite

    • Wenlong Song
    • Zuocheng Wang
    • Zongxin Guo

    ORIGINAL ARTICLE 18 July 2017 Pages: 3419 - 3427

38. Testing signals formation for identification of heat power objects and control systems comparison

    • B. N. Parsunkin
    • A. V. Lednov
    • J. Lednova

    ORIGINAL ARTICLE 19 July 2017 Pages: 3429 - 3436

39. Optimization calculation of reverse energy consumption based on feature parameter of NC code

    • Zhiguo Wang

    ORIGINAL ARTICLE 19 July 2017 Pages: 3437 - 3448

40. Production routes, electromechanical properties and potential application of layered nanomaterials and 2D nanopolymeric composites—a review

    • Tauseef Aized
    • Muhammad Bilal Khan
    • Muhammad Ilyas

    ORIGINAL ARTICLE 20 July 2017 Pages: 3449 - 3459

41. Optimization of the extrusion die and microstructure analysis for a hollow aluminum alloy profile

    • Hongxuan Ji
    • Huixing Nie
    • Jingwen Zhang

    ORIGINAL ARTICLE 20 July 2017 Pages: 3461 - 3471

42. Study on improving the precision of form surface produced in elastic deformation molding process

    • Ducnam Nguyen

    ORIGINAL ARTICLE 20 July 2017 Pages: 3473 - 3484

43. Hardness and residual stress modeling of powder injection laser cladding of P420 coating on AISI 1018 substrate

    • Navid Nazemi
    • Jill Urbanic
    • Mohammad Alam

    ORIGINAL ARTICLE 21 July 2017 Pages: 3485 - 3503

44. Relation between tool wear and workpiece modal vibration in ultra-precision raster fly cutting

    • Guoqing Zhang
    • Suet To

    ORIGINAL ARTICLE 21 July 2017 Pages: 3505 - 3515

45. The characteristics and reduction of porosity in high-power laser welds of thick AISI 304 plate

    • Junhao Sun
    • Pulin Nie
    • Wang Zhang

    ORIGINAL ARTICLE 21 July 2017 Pages: 3517 - 3530

46. Engineering modeling of wear profiles in tooth flank of polyamide spur gears

    • Oualid Ghelloudj
    • Djamel Zelmati
    • Abdelaziz Amirat

    ORIGINAL ARTICLE 21 July 2017 Pages: 3531 - 3540

47. Dual-drive long-travel precise positioning stage of grating ruling engine

    • JingShu Wang
    • Bayanheshig
    • ChangAn Zhu

    ORIGINAL ARTICLE 21 July 2017 Pages: 3541 - 3550

48. Electrothermal energy distribution model for EDM drilling of HSLA steels

    • J. M. Orona-Hinojos
    • E. Hurtado-Delgado
    • P. Pérez-Villanueva

    ORIGINAL ARTICLE 21 July 2017 Pages: 3551 - 3565

49. Stress corrosion cracking: characteristics, mechanisms and experimental study

    • C. A. Loto

    ORIGINAL ARTICLE 21 July 2017 Pages: 3567 - 3582

50. A study of severe flange wrinkling in first-pass conventional spinning of hemispherical part

    • Qingshuai Kong
    • Zhongqi Yu
    • Zhongqin Lin

    ORIGINAL ARTICLE 21 July 2017 Pages: 3583 - 3598