1. Diagnostics of spindle unit, model design and analysis

   • Fan Sabirov
   • D. Suslov
   • Sergey Savinov

   ORIGINAL ARTICLE 03 January 2012 Pages: 861 - 865

2. Manufacturing complexity and its measurement based on entropy models

   • Zhifeng Zhang

   ORIGINAL ARTICLE 04 January 2012 Pages: 867 - 873

3. A method for thermal characterization and modeling of large gantry-type machine tools

   • E. Gomez-Acedo
   • A. Olarra
   • L. N. Lopez de la Calle

   ORIGINAL ARTICLE 15 January 2012 Pages: 875 - 886

4. Prediction and experimental validation of micro-milling cutting forces of AISI H13 steel at hardness between 35 and 60 HRC

   • S. M. Afazov
   • S. M. Ratchev
   • J. Segal

   ORIGINAL ARTICLE 28 December 2011 Pages: 887 - 899

5. Research on the modeling of burr formation process in micro-ball end milling operation on Ti–6Al–4V

   • M. J. Chen
   • H. B. Ni
   • Y. Jiang

   ORIGINAL ARTICLE 08 January 2012 Pages: 901 - 912

6. Development of a three-component dynamometer to measure turning force

   • Tulio Hallak Panzera
   • Paulo Roberto Souza
   • Tanius Rodrigues Mansur

   ORIGINAL ARTICLE 28 December 2011 Pages: 913 - 922

7. Wide roller guide machining by four-axis machine tools for cylindrical cams

   • Jui-Pin Hung
   • Yuan-Lung Lai

   ORIGINAL ARTICLE 25 January 2012 Pages: 923 - 932

8. Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V

   • Anhai Li
   • Jun Zhao
   • Dong Wang

   ORIGINAL ARTICLE 23 December 2011 Pages: 933 - 942

9. Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V

   • Wu Ze
   • Deng Jianxin
   • Zhao Jun

   ORIGINAL ARTICLE 07 January 2012 Pages: 943 - 951

10. Prediction of abrasive wear rate of in situ Cu–Al₂O₃ nanocomposite using artificial neural networks

    • A. Fathy
    • A. A. Megahed

    ORIGINAL ARTICLE 23 December 2011 Pages: 953 - 963

11. A practical method to evaluate the forming severity of tubular hydroformed parts

    • Daniel E. Green
    • Tirumala S. Angara
    • Thomas Wormald

    ORIGINAL ARTICLE 23 December 2011 Pages: 965 - 980

12. Thickness distribution and design of a multi-stage process for sheet metal incremental forming

    • Junchao Li
    • Jianbiao Hu
    • Pei Geng

    ORIGINAL ARTICLE 23 December 2011 Pages: 981 - 988

13. Studies of the interactive effect of specimen and grain sizes on the plastic deformation behavior in microforming

    • W. L. Chan
    • M. W. Fu

    ORIGINAL ARTICLE 03 January 2012 Pages: 989 - 1000

14. Study of void closure in hot radial forging process using 3D nonlinear finite element analysis

    • J. Chen
    • K. Chandrashekhara
    • V. L. Richards

    ORIGINAL ARTICLE 12 January 2012 Pages: 1001 - 1011

15. Evaluation of the characteristics of the microelectrical discharge machining process using response surface methodology based on the central composite design

    • Y. C. Lin
    • C. C. Tsao
    • D. C. Wen

    ORIGINAL ARTICLE 17 November 2011 Pages: 1013 - 1023

16. Improvement of EDM efficiency with a new adaptive control strategy

    • Jin Wang
    • Fuzhu Han
    • Fuling Zhao

    ORIGINAL ARTICLE 12 January 2012 Pages: 1025 - 1040

17. Optimization of machining parameters in rotary EDM process by using the Taguchi method

    • E. Aliakbari
    • H. Baseri

    ORIGINAL ARTICLE 21 January 2012 Pages: 1041 - 1053

18. Laser drilling assisted with jet electrochemical machining for the minimization of recast and spatter

    • Hua Zhang
    • Jiawen Xu

    ORIGINAL ARTICLE 09 December 2011 Pages: 1055 - 1062

19. Tribological characterization of electroless Ni–10% P coatings at elevated test temperature under dry conditions

    • F. Masoumi
    • H. R. Ghasemi
    • D. Shahriari

    ORIGINAL ARTICLE 13 December 2011 Pages: 1063 - 1070

20. A new approach to thermally induced volumetric error compensation

    • Yuxia Lu
    • M. N. Islam

    ORIGINAL ARTICLE 11 January 2012 Pages: 1071 - 1085

21. Investigation on contact parameters in cold rotary forging using a 3D FE method

    • Xinghui Han
    • Lin Hua

    ORIGINAL ARTICLE 06 January 2012 Pages: 1087 - 1106

22. Instrumentation and modeling of high-pressure roller crusher for silicon carbide production

    • Hamid Reza Karimi
    • Sylvester Sedem Djokoto

    ORIGINAL ARTICLE 02 February 2012 Pages: 1107 - 1113

23. A solution procedure for integrated supply chain planning problem in open business environment using genetic algorithm

    • Jinwu Seo
    • Hanil Jeong
    • Jinwoo Park

    ORIGINAL ARTICLE 18 January 2012 Pages: 1115 - 1133

24. Classification and modeling for in-plant milk-run distribution systems

    • Huseyin Selcuk Kilic
    • M. Bulent Durmusoglu
    • Murat Baskak

    ORIGINAL ARTICLE 10 January 2012 Pages: 1135 - 1146

25. Economics of additive manufacturing for end-usable metal parts

    • Eleonora Atzeni
    • Alessandro Salmi

    ORIGINAL ARTICLE 08 February 2012 Pages: 1147 - 1155

26. Compact visual control system for aligning and tracking narrow butt seams with CO₂ gas-shielded arc welding

    • De Xu
    • Zaojun Fang
    • Min Tan

    ORIGINAL ARTICLE 04 January 2012 Pages: 1157 - 1167

27. Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

    • Jinghua Xu
    • Shuyou Zhang
    • Xiaojian Liu

    ORIGINAL ARTICLE 19 February 2012 Pages: 1169 - 1178

28. Correcting and compressing interpolation algorithm for free-form surface machining

    • Xiaohui Zhang
    • Dong Yu
    • Taotao Song

    ORIGINAL ARTICLE 15 January 2012 Pages: 1179 - 1189

29. Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation

    • Lin Zhiwei
    • Shen Hongyao
    • Fu Jianzhong

    ORIGINAL ARTICLE 30 December 2011 Pages: 1191 - 1203

30. An improved tolerance charting technique using an analysis of setup capability

    • F. González Contreras

    ORIGINAL ARTICLE 03 January 2012 Pages: 1205 - 1218

31. An effective hybrid graph and genetic algorithm approach to process planning optimization for prismatic parts

    • Weijun Huang
    • Yujin Hu
    • Ligang Cai

    ORIGINAL ARTICLE 30 December 2011 Pages: 1219 - 1232

32. Dynamics model of active fixturing systems for thin-walled parts under moving loads

    • Thomas N. Papastathis
    • Svetan M. Ratchev
    • Atanas A. Popov

    Original Article 15 January 2012 Pages: 1233 - 1247

33. A hybrid metaheuristic for concurrent layout and scheduling problem in a job shop environment

    • Mohammad Ranjbar
    • Mojtaba Najafian Razavi

    ORIGINAL ARTICLE 28 December 2011 Pages: 1249 - 1260

34. Applying bidirectional kinematics to assembly error analysis for five-axis machine tools with general orthogonal configuration

    • R. S. Lee
    • Y. H. Lin

    ORIGINAL ARTICLE 25 January 2012 Pages: 1261 - 1272

35. An iterative feedrate optimization method for real-time NURBS interpolator

    • Xiao-ting Zhang
    • Zhan Song

    ORIGINAL ARTICLE 23 December 2011 Pages: 1273 - 1280