1. A combined FEA and design of experiments approach for the design and analysis of warm forming of aluminum sheet alloys

   • Hong Seok Kim

   ORIGINAL ARTICLE 31 March 2010 Pages: 1 - 14

2. A computer simulation approach to evaluating bowl versus inverted bowl assembly line arrangement with variable operation times

   • Biman Das
   • Alberto Garcia-Diaz
   • Kalyan K. Ghoshal

   ORIGINAL ARTICLE 29 March 2010 Pages: 15 - 24

3. A new shell casting process based on expendable pattern with vacuum and low-pressure casting for aluminum and magnesium alloys

   • Wenming Jiang
   • Zitian Fan
   • Zhong Zhao

   ORIGINAL ARTICLE 24 March 2010 Pages: 25 - 34

4. Advanced model of the tool edge blunting under machining

   • Zdzisław Pluta
   • Tadeusz Hryniewicz

   ORIGINAL ARTICLE 18 March 2010 Pages: 35 - 43

5. Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel

   • Tongchao Ding
   • Song Zhang
   • Xiaoli Zhu

   Original Article 18 March 2010 Pages: 45 - 55

6. Development of a system for monitoring tool condition using acousto-optic emission signal in face turning—an experimental approach

   • Balla Srinivasa Prasad
   • M. M. M. Sarcar
   • B. Satish Ben

   ORIGINAL ARTICLE 01 April 2010 Pages: 57 - 67

7. A study of the cutting-induced heating effect on the machined surface in ultra-precision raster milling of 6061 Al alloy

   • Sujuan Wang
   • Suet To
   • W. B. Lee

   ORIGINAL ARTICLE 31 March 2010 Pages: 69 - 78

8. Surface roughness prediction in turning of femoral head

   • Nikolaos I. Galanis
   • Dimitrios E. Manolakos

   ORIGINAL ARTICLE 01 April 2010 Pages: 79 - 86

9. An experimental study on influences of material brittleness on chip morphology

   • Guosheng Su
   • Zhanqiang Liu

   ORIGINAL ARTICLE 31 March 2010 Pages: 87 - 92

10. A friction model for dry contacts during metal-forming processes

    • Maziar Ramezani
    • Zaidi Mohd Ripin

    ORIGINAL ARTICLE 28 March 2010 Pages: 93 - 102

11. A study on thick plate forming using flexible forming process and its application to a simply curved plate

    • Seong-Chan Heo
    • Young-Ho Seo
    • Beom-Soo Kang

    ORIGINAL ARTICLE 31 March 2010 Pages: 103 - 115

12. Influence of material properties variability on springback and thinning in sheet stamping processes: a stochastic analysis

    • Laura Marretta
    • Rosa Di Lorenzo

    ORIGINAL ARTICLE 11 April 2010 Pages: 117 - 134

13. Combined quality loss (CQL) concept in WPCA-based Taguchi philosophy for optimization of multiple surface quality characteristics of UNS C34000 brass in cylindrical grinding

    • Bharat Chandra Routara
    • Saumya Darsan Mohanty
    • Siba Sankar Mahapatra

    Original Article 31 March 2010 Pages: 135 - 143

14. Microceramic injection molding of a multilayer micropatterned micropart

    • Min-Wen Wang

    ORIGINAL ARTICLE 19 March 2010 Pages: 145 - 153

15. Finite element simulation and experimental study on the through-mask electrochemical micromachining (EMM) process

    • Wang Li
    • Wang Quandai
    • Lu Bingheng

    ORIGINAL ARTICLE 13 April 2010 Pages: 155 - 162

16. Optimization of ultrasonic welding parameters for copper to copper joints using design of experiments

    • Sooriyamoorthy Elangovan
    • K. Prakasan
    • V. Jaiganesh

    ORIGINAL ARTICLE 10 April 2010 Pages: 163 - 171

17. Predictions of the optimized friction stir spot welding process parameters for joining AA2024 aluminum alloy using RSM

    • R. Karthikeyan
    • V. Balasubramanian

    ORIGINAL ARTICLE 01 April 2010 Pages: 173 - 183

18. Effect of single and multi-channel electrodes application on EDM fast hole drilling performance

    • Oguzhan Yilmaz
    • M. Ali Okka

    ORIGINAL ARTICLE 09 April 2010 Pages: 185 - 194

19. Optimizing machining parameters of silicon carbide ceramics with ED milling and mechanical grinding combined process

    • Renjie Ji
    • Yonghong Liu
    • Jianmin Ma

    ORIGINAL ARTICLE 10 April 2010 Pages: 195 - 204

20. Prediction of surface characteristics obtained by burnishing

    • Afef Bougharriou
    • Wassila Bouzid Saï
    • Kacem Saï

    Original Article 21 March 2010 Pages: 205 - 215

21. HAZ hydrogen cracking of 9Cr-0.5 Mo-1.7W steels

    • S. Manimozhi
    • S. Suresh
    • V. Muthupandi

    ORIGINAL ARTICLE 15 April 2010 Pages: 217 - 223

22. Oxidation and ignition behavior of a magnesium alloy containing rare earth elements

    • Jinsong Rao
    • Huaji Li

    ORIGINAL ARTICLE 28 March 2010 Pages: 225 - 231

23. Development of an automated testing system for vehicle infotainment system

    • Yingping Huang
    • Ross McMurran
    • Jan Kieloch

    ORIGINAL ARTICLE 15 April 2010 Pages: 233 - 246

24. Producing of AZ91/SiC composite by friction stir processing (FSP)

    • Parviz Asadi
    • Ghader Faraji
    • Mohammad K. Besharati

    ORIGINAL ARTICLE 10 April 2010 Pages: 247 - 260

25. Establishing circle and circular-cylinder references using computational geometric techniques

    • M. S. Shunmugam
    • N. Venkaiah

    ORIGINAL ARTICLE 05 March 2010 Pages: 261 - 275

26. Semi-automatic feature point extraction using one seed point

    • Sheng-Han Hsu
    • Jiing-Yih Lai

    ORIGINAL ARTICLE 01 April 2010 Pages: 277 - 295

27. Representation and similarity assessment in case-based process planning and die design for manufacturing automotive panels

    • Chun-Fong You
    • Yi-Lung Tsai
    • Kun-Yu Liu

    ORIGINAL ARTICLE 28 March 2010 Pages: 297 - 310

28. A genetic algorithm to optimize multiproduct multiconstraint inventory control systems with stochastic replenishment intervals and discount

    • Ata Allah Taleizadeh
    • Seyed Taghi Akhavan Niaki
    • Alireza Fallah Tafti

    ORIGINAL ARTICLE 21 March 2010 Pages: 311 - 323

29. An efficient architecture for scheduling flexible job-shop with machine availability constraints

    • E. Moradi
    • S. M. T. Fatemi Ghomi
    • M. Zandieh

    ORIGINAL ARTICLE 11 April 2010 Pages: 325 - 339

30. Simulation-based metamodels for the analysis of scheduling decisions in a flexible manufacturing system operating in a tool-sharing environment

    • N. Suresh Kumar
    • Rajagopalan Sridharan

    ORIGINAL ARTICLE 30 March 2010 Pages: 341 - 355

31. Concurrent optimization of machining process parameters and tolerance allocation

    • V. Janakiraman
    • R. Saravanan

    ORIGINAL ARTICLE 24 March 2010 Pages: 357 - 369

32. Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder–Mead and genetic algorithm methods

    • S. Jayabal
    • U. Natarajan

    ORIGINAL ARTICLE 28 March 2010 Pages: 371 - 381

33. A communication protocol among agents for exchanging data in the extended enterprise

    • Omar López-Ortega
    • Karla López de la Cruz

    ORIGINAL ARTICLE 20 April 2010 Pages: 383 - 396

34. Solving conflicting bi-objective facility location problem by NSGA II evolutionary algorithm

    • Ranjan Bhattacharya
    • Susmita Bandyopadhyay

    ORIGINAL ARTICLE 02 April 2010 Pages: 397 - 414

35. Modeling and simulation of a parallel plate heat sink using computational fluid dynamics

    • R. Arularasan
    • R. Velraj

    SPECIAL ISSUE - ORIGINAL ARTICLE 20 December 2008 Pages: 415 - 419