Articles

1. Influence of Post-weld Heat Treatment on Microstructure and Corrosion Behavior of Dissimilar Friction Welded Joint of IN713LC Superalloy and AISI 4140 Steel

   • Vijay T. Gaikwad
   • M. K. Mishra
   • R. K. P. Singh

   Original Research Article 29 April 2024

   

2. Effect of Low-temperature Annealing on Mechanical Properties of Warm-rolled High Silicon Steel Produced by Twin-roll Strip Casting

   • You Zhou
   • Cheng Zhou
   • Yi Mao

   Original Research Article 29 April 2024

   

3. Effect of Initial 〈0001〉||RD Orientation on the Rolling Texture of AZ91 Alloy

   • Ebrahim Tolouie
   • Roohollah Jamaati

   Original Research Article 24 April 2024

   

4. Dialogue with Emerging Engineers

   Feature 23 April 2024

   

5. Can You Identify the Microstructure?

   Mystery Micro 12 April 2024

   

6. Microstructural Features Intimated in Automotive Grade IF Steel Subjected to Conventional and Severe Shot Peening

   • Bibekananda Sahoo
   • K. Udaya Bhat

   Original Research Article 09 April 2024

   

7. MicroArt

   Feature 25 March 2024

   

8. Archeometallurgical Investigation of a Fragment from a Medieval Sword Blade

   • Paolomarco Merico
   • Michela Faccoli
   • Giovanna Cornacchia

   Original Research Article Open access 22 March 2024

   

9. Effect of Post-ECAP Annealing on the Microstructure and Mechanical Properties of Commercially Pure Titanium

   • K. Hajizadeh
   • B. Eghbali
   • K. J. Kurzydlowski

   Original Research Article 20 March 2024

   

10. Modeling and Prediction of a 3G-980HF Spot Weld Shear Strength Using Response Surface Methodology

    • Mansour N. Elhemri
    • O. Elmabrouk
    • Abdelbaset R. H. Midawi

    Original Research Article 20 March 2024

    

11. Correction: Color Band Formation on Heated Steel Bars and Subsequent Formation of Pearlite Versus Spheroidite on Slow Cooling

    • Tim Zowada
    • Kevin Cashen
    • J. D. Verhoeven

    Correction 18 March 2024

12. Thank You to Our Volunteer Guest Editors and Reviewers

    Announcement 14 March 2024

13. 2024 Henry Clifton Sorby Award

    Society 11 March 2024

    

14. Correction: Effects of Homogenization Heat Treatment on Microstructure, Mechanical and Corrosion Properties of Transient Liquid Phase (TLP)-Bonded Inconel 617/AISI 310 Stainless Steel

    • Vahid Salehi Mobarakeh
    • Behzad Niroumand

    Correction 06 March 2024

15. Influence of Cold Rolling on the Microstructure and Mechanical Properties of FeCoCrNiMn High-Entropy Alloy

    • Mohamad Ahl Sarmadi
    • Masoud Atapour
    • Mehdi Alizadeh

    Original Research Article 04 March 2024

    

16. Effect of Different Post Processing Techniques on Microstructure and Mechanical Properties of Atmospheric Plasma Sprayed WC-17Co Coatings

    • Dmitry Dzhurinskiy
    • Abhishek Babu
    • Oleg Dubinin

    Original Research Article 02 March 2024

    

17. Impact of Different Heat Treatments on the Mechanical Properties and Microstructure of Precipitation-Hardened Stainless Steel Fabricated by Laser Powder Bed Fusion

    • Juan Negron
    • Majed Ali
    • Ala Qattawi

    Original Research Article Open access 01 March 2024

    

18. Correction to: Evolution of Al₃₂Si₇Fe₄Co Intermetallic Phase in Cobalt Containing Al-Si-Fe Scrap Alloy

    • Kishor Modalavalasa
    • Battula Sri Rishith Satya Surya
    • A. K. Prasada Rao

    Correction 28 February 2024

19. Achieving Unusual Stable Textures in AZ91 Alloy by Asymmetric Hot Rolling

    • Ebrahim Tolouie
    • Roohollah Jamaati

    Original Research Article 28 February 2024

    

20. Effect of Boron Addition on the Microstructure, Thermal, and Mechanical Properties of Al-5%Mg-2%Ti Alloy

    • Hakan Yaykaşlı
    • Musa Göğebakan

    Original Research Article 21 February 2024

    

21. Announcing the Metallography, Microstructure, and Analysis 2023 Editor’s Choice Awards

    • Ryan M. Deacon

    Editorial 20 February 2024 Pages: 1 - 2

    

22. Evolution of Microstructure and Mechanical Properties Attainment in Fe–19Mn–0.6C–4Si–3Al–0.04Nb Steel Upon Thermo-Mechanical Processing

    • Nicky Kisku

    Original Research Article 20 February 2024

    

23. MicroArt

    Feature 16 February 2024 Pages: 191 - 191

    

24. Microstructure and Mechanical Properties of Heat-Treated High-Nitrogen Martensitic Stainless Steel

    • Harish Singh Dhami
    • Nellori Dileep Kumar
    • P. Chakravarthy

    Original Research Article 14 February 2024 Pages: 96 - 105

    

25. Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

    • H. M. Medrano-Prieto
    • A. Santos-Beltrán
    • R. Martínez-Sánchez

    Original Research Article 13 February 2024 Pages: 181 - 187

    

26. Understanding the Subsurface Microstructure and Thermal Behavior of Model Oxide Dispersion Strengthened Alloys Through FIB_SEM and TEM

    • K. G. Raghavendra
    • M. Sivakumar
    • Arup Dasgupta

    Original Research Article Open access 13 February 2024 Pages: 86 - 95

    

27. Microstructure Evolution in 304L Stainless Steel Cladding Produced by Additive Friction Stir Deposition

    • B. E. T. Roper
    • C. M. Roper
    • P. G. Allison

    Original Research Article 12 February 2024 Pages: 174 - 180

    

28. Can You Identify the Microstructure?

    Mystery Micro 09 February 2024 Pages: 198 - 199

    

29. Microstructure and Hardness Investigation of Tribaloy Alloy T-400C Hardfacing Deposited on Nickel-Based Alloy Inconel 740H via Plasma Transferred Arc Welding Subjected to Long-Time Aging

    • X. Z. Zhang
    • R. Liu
    • F. Khelfaoui

    Original Research Article 09 February 2024 Pages: 145 - 173

    

30. Effect of Preheating Temperature on Microstructure and Mechanical Properties of Friction Stir Welded DMR249A HSLA Steel Joints

    • Seerangan Ragu Nathan
    • Visvalingam Balasubramanian
    • Mikhail Ivanov

    Original Research Article 09 February 2024 Pages: 68 - 85

    

31. 2024 International Metallographic Contest (IMC) and Exhibit

    Society 05 February 2024 Pages: 194 - 197

    

32. Dialogue with Emerging Engineers

    • David Lammers, University of South Dakota

    Feature 29 January 2024 Pages: 188 - 190

    

33. Statistical Distribution of Si Phases at Different Sr Levels in AlSi₉ Alloys

    • İbrahim Halil Kalkan
    • İbrahim Göksel Hızlı
    • Derya Dispinar

    Original Research Article 24 January 2024 Pages: 130 - 144

    

34. Prevalence of Heteroepitaxial Recrystallization in the Low Solvus High Refractory (LSHR) γ–γ′ Superalloy

    • Y. Lee
    • E. Hershkovitz
    • V. M. Miller

    Original Research Article 23 January 2024 Pages: 114 - 129

    

35. A Hypothesis for the Mechanism that Produces the Utsuri Pattern on Japanese Swords

    • Tim Zowada
    • J. D. Verhoeven

    Original Research Article 23 January 2024 Pages: 62 - 67

    

36. Production and Characterization of an Economical 1100 MPa Advanced High-Strength Silicon-Containing Steel

    • Hossam Halfa
    • Amer Eid Amer
    • Mamdouh Eissa

    Original Research Article Open access 10 January 2024 Pages: 40 - 61

    

37. Effects of Homogenization Heat Treatment on Microstructure, Mechanical and Corrosion Properties of Transient Liquid Phase (TLP)-Bonded Inconel 617/AISI 310 Stainless Steel

    • Vahid Salehi Mobarakeh
    • Behzad Niroumand

    Original Research Article 09 January 2024 Pages: 29 - 39

    

38. Artistic Entries from the 2023 International Metallographic Contest

    Society 21 December 2023 Pages: 192 - 193

    

39. Significant Texture Weakening of AZ91 Alloy by Asymmetric Hot Rolling

    • Ebrahim Tolouie
    • Roohollah Jamaati

    Original Research Article 14 December 2023 Pages: 106 - 113

    

40. Mechanical and Biocorrosion Properties of Ti-XSn (X = 0, 5, 10, 15 wt.%) Alloys for Biomedical Application Fabricated by Powder Metallurgy

    • Mojtaba Najafizadeh
    • Mansoor Bozorg
    • Pasquale Cavaliere

    Original Research Article 14 December 2023 Pages: 18 - 28

    

41. A Study of the Divorced Eutectoid Transformation, DET, in Eutectoid Composition Plain Carbon Steel

    • Tim Zowada
    • J. D. Verhoeven

    Original Research Article 14 December 2023 Pages: 3 - 17

    

42. A Preview of a Special Issue on Quantitative Metallography and Microstructure Modeling

    • Ryan M. Deacon

    Editorial 06 December 2023 Pages: 881 - 882

43. Dialogue with Emerging Engineers

    Feature 04 December 2023 Pages: 1062 - 1064

    

44. Author Correction: Recent Advances in Magnesium-Based Metal Matrix Surface Composites Developed via Friction Stir Processing Route—An Overview

    • Shivali Singla
    • Amardeep Singh Kang
    • Amit Handa

    Author Correction 01 December 2023 Pages: 1068 - 1068

45. Can You Identify the Microstructure?

    Mystery Micro 01 December 2023 Pages: 1066 - 1067

    

46. MicroArt

    Feature 28 November 2023 Pages: 1065 - 1065

    

47. Color Band Formation on Heated Steel Bars and Subsequent Formation of Pearlite Versus Spheroidite on Slow Cooling

    • Tim Zowada
    • Kevin Cashen
    • J. D. Verhoeven

    Original Research Article 28 November 2023 Pages: 953 - 964

    

48. Comparison of Two Swords of Antiquity: The Japanese Sword and the Muslim Crucible Damascus Sword

    • J. D. Verhoeven
    • Tim Zowada

    Review 28 November 2023 Pages: 934 - 943

    

49. Alternative Reagent for Revealing the Entire Microstructure of Additive Manufactured Ti–6Al–4V Alloy

    • Ahad Shafiee
    • Hadi Ghasemi-Nanesa
    • Philippe Bocher

    Original Research Article 20 November 2023 Pages: 1047 - 1054

    

50. EDS-PhaSe: Phase Segmentation and Analysis from EDS Elemental Map Images Using Markers of Elemental Segregation

    • Dishant Beniwal
    • Vikas Shivam
    • Pratik K. Ray

    Original Research Article 20 November 2023 Pages: 924 - 933