1. A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components

   • Prafulla Kumar Sahoo
   • Sarojrani Pattnaik
   • Mihir Kumar Sutar

   Review Article - Mechanical Engineering 25 September 2019 Pages: 9805 - 9835

   

2. Three-Dimensional Full-Loop Hydrodynamic Simulation of a Circulating Fluidized-Bed Gasifier: A Quantitative Assessment of Drag Models

   • Vikrant Sharma
   • Vijay Kumar Agarwal

   Research Article - Chemical Engineering 26 July 2019 Pages: 9837 - 9850

   

3. Comparative Study on the Catalytic Degradation of Methyl Orange by Silver Nanoparticles Synthesized by Solution Combustion and Green Synthesis Method

   • Um-e-Salma Amjad
   • Lubna Sherin
   • Maria Mustafa

   Research Article - Chemical Engineering 12 July 2019 Pages: 9851 - 9857

   

4. Low-Cost Photo-Fenton-Like Process for the Removal of Synthetic Dye in Aqueous Solution at Circumneutral pH

   • Zoubir Manaa
   • Derradji Chebli
   • Abdeltif Amrane

   Research Article - Chemical Engineering 17 September 2019 Pages: 9859 - 9867

   

5. Heat and Mass Transfer of Free Convection Flow Over a Vertical Plate with Chemical Reaction Under Wall–Slip Effect

   • Saeed Ullah Jan
   • Sami Ul Haq
   • Ilyas Khan

   Research Article - Chemical Engineering 08 June 2019 Pages: 9869 - 9887

   

6. Evaluating Untreated Clay’s Adsorptive Capacity to Remove an Anionic Dye from Aqueous Solution

   • Salima Dadou
   • Tarek Berrama
   • Assia Beriber

   Research Article - Chemical Engineering 19 September 2019 Pages: 9889 - 9903

   

7. Electrochemical Performance Analysis of Lead Dioxide Prepared from Intermediate Oxides

   • L. Rahmani
   • R. Fitas
   • L. Zerroual

   Research Article - Chemical Engineering 28 May 2019 Pages: 9905 - 9910

   

8. A Molecular Dynamics Simulation Probe of the Solubility Parameters of Supercritical Water and Methanol

   • Hassan Alasiri

   Research Article - Chemical Engineering 29 May 2019 Pages: 9911 - 9917

   

9. Biodiesel Production from Waste Edible Oil with Heterogeneous Catalysts (Nanoclay-Based Nanocatalysts)

   • Farah Halek
   • Nasrin Aghamohammadi
   • Farzaneh Mohamadi

   Research Article - Chemical Engineering 18 July 2019 Pages: 9919 - 9924

   

10. Removal of Congo Red from Aqueous Solution Using ‘Perna viridis’: Kinetic Study and Modeling Using Artificial Neural Network

    • Adarsh Ajith Naik
    • Vishnuprasad Selvaraj
    • Haribabu Krishnan

    Research Article - Chemical Engineering 15 July 2019 Pages: 9925 - 9937

    

11. New Way of Synthesis of Basic Bismuth Nitrate by Electrodeposition from Ethanol Solution: Characterization and Application for Removal of RB19 from Water

    • Slobodan M. Najdanović
    • Milica M. Petrović
    • Aleksandar Lj. Bojić

    Research Article - Chemical Engineering 26 September 2019 Pages: 9939 - 9950

    

12. Synthesis of 3D Hierarchical Flower-like MgO Microstructure: Investigation of its Adsorption and Antibacterial Properties

    • Pınar Karacabey
    • Sude Döven
    • Ayla Özer

    Research Article - Chemical Engineering 20 June 2019 Pages: 9951 - 9964

    

13. Synthesis of Epoxidized Citrullus lanatus Seed Oil: Experimental Investigation and Statistical Optimization

    • Sangram Shamrao Patil
    • Hara Mohan Jena

    Research Article - Chemical Engineering 05 August 2019 Pages: 9965 - 9976

    

14. Dewatering of Brackish Water and Wastewater by an Integrated Forward Osmosis and Nanofiltration System for Direct Fertigation

    • Supritam Dutta
    • Kaushik Nath

    Research Article - Chemical Engineering 16 September 2019 Pages: 9977 - 9986

    

15. Sono-electro-chemical Treatment of Reactive Black 5 Dye and Real Textile Effluent Using MnSO₄/Na₂S₂O₈ Electrolytes

    • James Johin
    • P. V. Nidheesh
    • Thirugnanasambandam Sivasankar

    Research Article - Chemical Engineering 27 September 2019 Pages: 9987 - 9996

    

16. Influence of the Release Kinetics of Chemical Species on the Sustainability of Stabilized/Solidified Materials with Hydraulic Binder Subjected to Chemically Aggressive Environments

    • Cherif Belebchouche
    • Karim Moussaceb
    • Abdelkader Hammoudi

    Research Article - Chemical Engineering 11 July 2019 Pages: 9997 - 10015

    

17. Effective Dephenolation of Effluent from Petroleum Industry Using Ionic-Liquid-Induced Hybrid Adsorbent

    • M. N. Abonyi
    • C. O. Aniagor
    • M. C. Menkiti

    Research Article - Chemical Engineering 12 July 2019 Pages: 10017 - 10029

    

18. Characterization of Bauxite as a Potential Natural Photocatalyst for Photodegradation of Textile Dye

    • Nurul Jannah Ismail
    • Mohd Hafiz Dzarfan Othman
    • Suriani Abu Bakar

    Research Article - Chemical Engineering 13 July 2019 Pages: 10031 - 10040

    

19. Comprehensive Study of Morphological Modification of Dual-Layer Hollow Fiber Membrane

    • Silvana Dwi Nurherdiana
    • Wahyu Prasetyo Utomo
    • Hamzah Fansuri

    Research Article - Chemical Engineering 31 July 2019 Pages: 10041 - 10055

    

20. Sustainable Approach for Tannery Wastewater Treatment: Bioelectricity Generation in Bioelectrochemical Systems

    • Alae Elabed
    • Soumya El Abed
    • Benjamin Erable

    Research Article - Chemical Engineering 29 July 2019 Pages: 10057 - 10066

    

21. Taguchi Optimization Method for Nickel Removal from Aqueous Solutions Using Non-living Pleurotus mutilus

    • Noureddine Daoud
    • Ammar Selatnia

    Research Article - Chemical Engineering 20 September 2019 Pages: 10067 - 10077

    

22. Parametric Study of COD Reduction from Textile Processing Wastewater Using Adsorption on Cypress Cone-Based Activated Carbon: An Analysis of a Doehlert Response Surface Design

    • Meryem Khellouf
    • Rachida Chemini
    • Djamel Zeriri

    Research Article - Chemical Engineering 08 October 2019 Pages: 10079 - 10086

    

23. Electrochemical Impedance Spectroscopy as a Practical Tool for Monitoring the Carbonation Process on Reinforced Concrete Structures

    • Héctor Herrera Hernández
    • Francisco González Díaz
    • Jorge Morales Hernández

    Research Article - Chemical Engineering 08 August 2019 Pages: 10087 - 10103

    

24. Comparative Sorption of Nickel from an Aqueous Solution Using Biochar Derived from Banana and Orange Peel Using a Batch System: Kinetic and Isotherm Models

    • M. T. Amin
    • A. A. Alazba
    • M. Shafiq

    Research Article - Chemical Engineering 15 May 2019 Pages: 10105 - 10116

    

25. Rheology of Organoclay Dispersions and Modeling of Gelation Behavior and Finding Overlap Concentration

    • Muhammad Iftikhar Faraz

    Research Article - Chemical Engineering 19 June 2019 Pages: 10117 - 10126

    

26. Multi-functional Biochar Novel Surface Chemistry for Efficient Capture of Anionic Congo Red Dye: Behavior and Mechanism

    • Faheem
    • Jiangkun Du
    • Muhammad Afnan Talib

    Research Article - Chemical Engineering 15 October 2019 Pages: 10127 - 10139

    

27. Biodiesel Production Process, Optimization and Characterization of Azadirachta indica Biodiesel in a VCR Diesel Engine

    • Ravichandra Datla
    • Ravi Kumar Puli
    • V. Edwin Geo

    Research Article - Mechanical Engineering 07 August 2019 Pages: 10141 - 10154

    

28. Electro-Discharge Machining Performance of Nimonic 80A: An Experimental Observation

    • Debashish Sahu
    • Santosh Kumar Sahu
    • Saurav Datta

    Research Article - Mechanical Engineering 17 September 2019 Pages: 10155 - 10167

    

29. A Novel Three-Dimensional Inverse Method for Axial Compressor Blade Surface Design

    • Chen Yang
    • Hu Wu
    • Yan Liang

    Research Article - Mechanical Engineering 21 August 2019 Pages: 10169 - 10179

    

30. Time-Optimal Connection Between On-the-Fly Drilling Trajectories and Rest Boundary Conditions

    • Ammar Alzaydi

    Research Article - Mechanical Engineering 22 July 2019 Pages: 10181 - 10194

    

31. Experimental Explorations of Dual Fuel CI Engine Operating with Guizotia abyssinica Methyl Ester–Diesel Blend (B20) and Hydrogen at Different Compression Ratios

    • S. Jaikumar
    • S. K. Bhatti
    • V. Srinivas

    Research Article - Mechanical Engineering 22 July 2019 Pages: 10195 - 10205

    

32. Effect of Titanium Dioxide Particles on the Morphology, Mechanical, and Wear Properties of the Aluminum Alloy 3003-Based Composites

    • K. Anil Kumar
    • S. Natarajan
    • S. Ramachandra

    Research Article - Mechanical Engineering 30 July 2019 Pages: 10207 - 10217

    

33. Characterization of Pre- and Post-expansion Material Properties of Down-Hole Tubular

    • Rashid Khan
    • Mohammed Almeshaal

    Research Article - Mechanical Engineering 30 July 2019 Pages: 10219 - 10229

    

34. Dynamic Research and Experimental Analysis of a New Downhole Drilling Tool

    • Jialin Tian
    • Lai Wei
    • Tangjia Zhang

    Research Article - Mechanical Engineering 01 August 2019 Pages: 10231 - 10244

    

35. Optimization of Surface Roughness from Different Aspects in High-Power CO₂ Laser Cutting of AA5754 Aluminum Alloy

    • Predrag Janković
    • Miloš Madić
    • Srđan Mladenović

    Research Article - Mechanical Engineering 29 July 2019 Pages: 10245 - 10256

    

36. Finite Element Study of Flow of Partially Ionized Fluid Containing Nanoparticles

    • U. Nazir
    • Muhammad Nawaz
    • Salman Saleem

    Research Article - Mechanical Engineering 28 September 2019 Pages: 10257 - 10268

    

37. The Effect of Spacer Orientations on Temperature Polarization in a Direct Contact Membrane Distillation Process Using 3-d CFD Modeling

    • S. M. F. Hasani
    • A. S. Sowayan
    • M. Shakaib

    Research Article - Mechanical Engineering 26 August 2019 Pages: 10269 - 10284

    

38. Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis

    • Jabbar Gattmah
    • Fahrettin Ozturk
    • Sadettin Orhan

    Research Article - Mechanical Engineering 17 September 2019 Pages: 10285 - 10292

    

39. Optimal Material Selection for Total Hip Implant: A Finite Element Case Study

    • Abdullah Tahir Şensoy
    • Murat Çolak
    • Fehim Findik

    Research Article - Mechanical Engineering 05 August 2019 Pages: 10293 - 10301

    

40. Experimental Study of the Effects of Inclusion of Rectangular-Cut Twisted Tapes on Heat Transfer and Pressure Drop in a Round Tube

    • K. Ruengpayungsak
    • Manoj Kumar
    • S. Eiamsa-ard

    Research Article - Mechanical Engineering 30 July 2019 Pages: 10303 - 10312

    

41. Framing the Activation Energy and Binary Chemical Reaction on CNT’s with Cattaneo–Christov Heat Diffusion on Maxwell Nanofluid in the Presence of Nonlinear Thermal Radiation

    • K. Subbarayudu
    • S. Suneetha
    • A. M. Rashad

    Research Article - Mechanical Engineering 28 September 2019 Pages: 10313 - 10325

    

42. Header Design Optimization of Mini-channel Heat Sinks Using CuO–H₂O and Al₂O₃–H₂O Nanofluids for Thermal Management

    • Muazzam Ali
    • Ahmad Adnan Shoukat
    • Hassan Ali

    Research Article - Mechanical Engineering 03 August 2019 Pages: 10327 - 10338

    

43. Effects of Prandtl Number on Natural Convection in a Cavity Filled with Silver/Water Nanofluid-Saturated Porous Medium and Non-Newtonian Fluid Layers Separated by Sinusoidal Vertical Interface

    • Qusay R. Al-Amir
    • Saba Y. Ahmed
    • Farooq H. Ali

    Research Article - Mechanical Engineering 25 September 2019 Pages: 10339 - 10354

    

44. Comparative Investigation and Characterization of the Scratch and Wear Resistance Behavior of TiN, CrN, AlTiN and AlCrN Cathodic Arc PVD Coatings

    • Akeem Yusuf Adesina
    • Zuhair M. Gasem
    • Abdul Samad Mohammed

    Research Article - Mechanical Engineering 22 July 2019 Pages: 10355 - 10371

    

45. Effect of Thermal Distribution and Stiffness Variation on Welding Distortion in a Ship Panel Structure

    • Navid Azad
    • Armin Rahmati Darvazi
    • Mehdi Iranmanesh

    Research Article - Mechanical Engineering 24 July 2019 Pages: 10373 - 10387

    

46. Pre-cooling Intensity Effects on Cooling Efficiency in Cryogenic Turning

    • Seyed Hasan Musavi
    • Behnam Davoodi
    • Behzad Eskandari

    Research Article - Mechanical Engineering 30 July 2019 Pages: 10389 - 10396

    

47. Effect of Axial Compression and Wet Collapse Loads on Torsional Response of Flexible Pipe

    • Xiaohua Zhu
    • Qinglong Lei

    Research Article - Petroleum Engineering 02 August 2019 Pages: 10397 - 10408

    

48. Influence of Gas Migration on the Sustained Casing Pressure (SCP) of Subsea Wellhead in Deepwater Wells

    • Jing Zeng
    • Deli Gao
    • Jun Fang

    Research Article - Petroleum Engineering 25 September 2019 Pages: 10409 - 10419

    

49. Assessment of Trapping Mechanisms of CO₂ Sequestration and Optimization of Key Process Parameters in a Deep Saline Aquifer Using Reservoir Simulation and Response Surface Methodology

    • Ankita Mukherjee
    • Pratik Dutta

    Research Article - Petroleum Engineering 25 September 2019 Pages: 10421 - 10431

    

50. New Anti-balling Reamer Blade for Reaming in Soft and Sticky Formation Easy to Hydration and Collapsing

    • Jun Jing
    • Xiaohua Zhu
    • Degui Wang

    Research Article - Petroleum Engineering 09 October 2019 Pages: 10433 - 10446