1. Development of Thermal Rolling Regimes of Low-Alloy Arc Steel with Quasi-Homogeneous Ferrite-Bainitic Structure

   • O. V. Sych
   • S. V. Korotovskaya
   • N. S. Novoskoltsev

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1459 - 1468

   

2. Production of Single-Crystal Seeds [001] from Nickel–Tungsten Alloys by Directional Crystallization

   • V. N. Toloraya
   • G. A. Ostroukhova

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1469 - 1476

   

3. Heterogeneity of Structure and Mechanical Properties Studied in Thickness up to 100 mm of Low-Alloy Shipbuilding Steel Sheets with a Yield Strength Not Less Than 420 MPa

   • O. V. Sych
   • S. V. Korotovskaya
   • V. R. Nikitina

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1477 - 1489

   

4. Effect of Natural and Artificial Aging on Steel Mechanical Properties and Fracture Toughness

   • E. A. Yakovleva
   • A. V. Larionov
   • E. I. Khlusova

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1490 - 1498

   

5. Changes in the Structural and Textural States of VT41 Titanium Alloy Resulting from Hot Upsetting and Subsequent Annealing

   • P. N. Medvedev
   • S. A. Naprienko
   • E. V. Filonova

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1499 - 1505

   

6. Specific Features of Ruthenium Influence on Corrosion Characteristics of Different Titanium Alloys

   • A. S. Oryshchenko
   • V. P. Leonov
   • Yu. Yu. Malinkina

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1506 - 1514

   

7. High Strength Austenite Mn–Ni–Cu–V–C Dispersion Hardened Steel

   • M. V. Kostina
   • V. M. Blinov
   • S. Yu. Mushnikova

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1515 - 1525

   

8. Study of the Mechanisms of Formation of a Recrystallization Nucleus in Austenitic Nitrogen-Containing Steel during HTMT

   • O. V. Fomina
   • A. A. Zisman
   • T. V. Vikhareva

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1526 - 1533

   

9. Choosing Accumulation and Preliminary Heat Treatment Modes for Making Forged Ingots of Medium-Carbon Medium-Alloy Steels

   • V. V. Tsukanov
   • D. L. Smirnova
   • S. V. Efimov

   METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1534 - 1545

   

10. X-ray and Neutron Diffraction Study of High-Strength Steel: Methodological Aspects

    • M. L. Fedoseev
    • S. N. Petrov
    • T. A. Lychagina

    METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1546 - 1551

    

11. Investigation of the Properties, Structure, and Quality of the Ti–4.25Al–2V Alloy Blanks Produced by Direct Laser Deposition

    • V. P. Leonov
    • N. F. Molchanova
    • M. V. Iksanov

    METAL SCIENCE. METALLURGY 01 December 2022 Pages: 1552 - 1561

    

12. Study of the Structure and Properties of Functional Coatings from Composite Powders of the Aluminum–Silicon Nitride System Additionally Reinforced with a Sialon Type Phase

    • T. I. Bobkova
    • A. I. Dmitryuk
    • N. A. Lukyanova

    FUNCTIONAL MATERIALS 01 December 2022 Pages: 1562 - 1568

    

13. Coating of a Multicomponent System Al–Cr–Ni–Co–Fe on a Steel Substrate Obtained by Laser

    • D. A. Gerashchenkov
    • R. Yu. Bystrov

    FUNCTIONAL MATERIALS 01 December 2022 Pages: 1569 - 1574

    

14. Application of Cold Gas Dynamic Spraying as an Additive Technology for Producing Materials Based on Nickel Aluminide and Titanium Aluminide

    • D. A. Gerashchenkov

    FUNCTIONAL MATERIALS 01 December 2022 Pages: 1575 - 1581

    

15. Results of Studying the Profile of Single Tracks of Coatings Produced from Aluminum- and Nickel-Based Powders

    • A. S. Oryshchenko
    • D. A. Gerashchenkov

    FUNCTIONAL MATERIALS 01 December 2022 Pages: 1582 - 1591

    

16. Effect of Initial Powder Characteristics on Microrelief Features in the ZhS6K Grade Alloy after Selective Laser Fusion

    • A. N. Raevskikh
    • E. B. Chabina
    • E. V. Filonova

    FUNCTIONAL MATERIALS 01 December 2022 Pages: 1592 - 1604

    

17. On the Mechanism of Formation of Electrochromic WO₃ Films on the Surface of Sn, Ti, ITO Electrodes in the Process of Cathodic Electrodeposition

    • Alexey V. Shchegolkov
    • M. S. Lipkin
    • V. M. Lipkin

    FUNCTIONAL MATERIALS 01 December 2022 Pages: 1605 - 1614

    

18. Properties of Fiberglass Based on Fire-Resistant Polyester Resins Produced in Russia, Brands Arkpol 40 M and Polymer 3088 TA

    • V. S. Tryasunov
    • E. L. Shultseva
    • Yu. V. Polyakova

    POLYMER COMPOSITE MATERIALS 01 December 2022 Pages: 1615 - 1621

    

19. Influence of Ion-Plasma Treatment of Reinforcing Fillers on the Complex of PCM Properties

    • E. D. Kolpachkov
    • P. A. Shchur
    • A. V. Shvedov

    POLYMER COMPOSITE MATERIALS 01 December 2022 Pages: 1622 - 1630

    

20. Development of Cathodic Corrosion Protection Systems for Nuclear Icebreakers and Arctic Offshore Structures

    • O. A. Stavitsky
    • G. I. Nikolaev
    • P. I. Malashev

    CORROSION AND METAL PROTECTION 01 December 2022 Pages: 1631 - 1639

    

21. Research of Corrosion Cracking of D16T and Amg6 Aluminum Alloys Exposed to Microscopic Fungi

    • D. V. Belov
    • S. N. Belyaev
    • G. A. Gevorgyan

    CORROSION AND METAL PROTECTION 01 December 2022 Pages: 1640 - 1651

    

22. Composition and Morphology of Hot-Salt Corrosion in Heat-Resistant Nickel Alloys

    • D. A. Movenko
    • A. B. Laptev
    • O. A. Zagorskykh

    CORROSION AND METAL PROTECTION 01 December 2022 Pages: 1652 - 1657

    

23. Study of Hydrogenation and Corrosion of Steel Equipment and Pipelines at the Production Facilities of H₂S-Containing Hydrocarbon Raw Materials

    • R. K. Vagapov

    CORROSION AND METAL PROTECTION 01 December 2022 Pages: 1658 - 1665

    

24. On the Fatigue Strength Calculation of Welded Shell Structures Made of High-Strength Steels under Low-Cycle Loading: Part 1. Estimation at the Initial Stage of Fatigue Failure

    • A. V. Ilyin
    • K. E. Sadkin
    • N. S. Zabavichev

    STRUCTURAL AND TECHNOLOGICAL STRENGTH AND PERFORMANCE OF MATERIALS 01 December 2022 Pages: 1666 - 1682

    

25. On the Fatigue Strength Calculation of Welded Shell Structures Made of High-Strength Steels under Low-Cycle Loading: Part 2. Development of the Calculation Procedure

    • A. V. Ilyin
    • K. E. Sadkin
    • N. S. Zabavichev

    STRUCTURAL AND TECHNOLOGICAL STRENGTH AND PERFORMANCE OF MATERIALS 01 December 2022 Pages: 1683 - 1702

    

26. Studying Changes of Limit Deformations and Mechanical Properties of Different Structure under Signal and Multiple Explosive Loading

    • O. V. Glibenko
    • T. V. Vikhareva
    • A. V. Ilyin

    STRUCTURAL AND TECHNOLOGICAL STRENGTH AND PERFORMANCE OF MATERIALS 01 December 2022 Pages: 1703 - 1718

    

27. High Temperature Low Cycle Fatigue of Co–Cr–Ni–W–Ta Heat Resistant Alloy Produced by Additive Technological Processes

    • P. V. Ryzhkov
    • D. I. Suhov
    • S. A. Monin

    STRUCTURAL AND TECHNOLOGICAL STRENGTH AND PERFORMANCE OF MATERIALS 01 December 2022 Pages: 1719 - 1726

    

28. Study of the Unirradiated Weld Metal of the VVER-440 Reactor Vessel after 45 Years of Operation

    • K. I. Medvedev
    • D. Yu. Erak
    • A. A. Reshetnikov

    RADIATION MATERIALS SCIENCE 01 December 2022 Pages: 1727 - 1735

    

29. A Study of Primary Damage Formation in Collision Cascades in Titanium

    • R. E. Voskoboinikov

    RADIATION MATERIALS SCIENCE 01 December 2022 Pages: 1736 - 1745

    

30. Study of Structural Phase Transformations in the Metal of Welded Joints of Reactor Plants for Nuclear Icebreakers

    • M. N. Timofeev
    • R. I. Samoylenko
    • S. V. Gurkin

    RADIATION MATERIALS SCIENCE 01 December 2022 Pages: 1746 - 1753

    

31. Digital Reference Images when Evaluating the Quality of Casting from Aluminum and Magnesium Alloys

    • E. I. Kosarina
    • A. V. Smirnov
    • A. A. Demidov

    TESTING, DIAGNOSTICS, AND QUALITY CONTROL OF MATERIALS 01 December 2022 Pages: 1754 - 1761