1. Metals Extraction from Sulfide Ores with Microorganisms: The Bioleaching Technology and Recent Developments

   • Wasim Sajjad
   • Guodong Zheng
   • Wang Xu

   Review Paper 02 January 2019 Pages: 559 - 579

   

2. Reducing the Sintering Flue Gas Pollutants Emissions Based on the Accumulation Heat Effect in Iron Ore Sintering Process

   • J. M. Qie
   • C. X. Zhang
   • S. L. Wu

   Technical Paper 25 January 2019 Pages: 581 - 589

   

3. Mechanism of Interface Reactions Between Fe-2%Al Alloy and High-Silica Tundish Refractory

   • Abdulaziz Alhussein
   • Wen Yang

   Technical Paper 05 February 2019 Pages: 591 - 602

   

4. Recovery of Valuable Metals from Copper Smelter Slag by Sulfation Roasting

   • Rashid K. Nadirov

   Technical Paper 26 November 2018 Pages: 603 - 607

   

5. Investigations on Bioleaching of Copper and Zinc Oxide Ores

   • M. A. Shabani
   • M. Irannajad
   • A. R. Azadmehr

   Technical Paper 01 January 2019 Pages: 609 - 611

   

6. Validation and Implementation of Cold Purification Cake Leaching in Ammoniacal Carbonate Solutions at Hindustan Zinc Hydro Refineries

   • Sundar S. Sombhatla
   • Ashish Kumar
   • Kiran Kr. Rokkam

   Technical Paper 20 November 2018 Pages: 613 - 621

   

7. Leaching of Rare Earth Metals from Phosphor Coating of Waste Fluorescent Lamps

   • Amit Anand
   • Randhir Singh
   • Kali Sanjay

   Technical Paper 26 November 2018 Pages: 623 - 634

   

8. The Investigation on Enrichment of TiO₂ from Ti-Bearing Slag

   • Qiuju Li
   • Su Ji
   • Shaobo Zheng

   Technical Paper 05 December 2018 Pages: 635 - 644

   

9. Chloride Removal from Industrial Soils and Zinc Slag in Zinc Production Factories by Sodium Metabisulfite and Copper(II) Sulfate

   • Arezoo Rahmani
   • Davood Moradkhani
   • Seyed Kamal Mousavinezhad

   Technical Paper 01 January 2019 Pages: 645 - 650

   

10. Research on Interfacial Reaction and Growth Behavior of Intermetallic Compound of Dip-Soldered Sn/Ni System

    • Yu Qiu
    • Yijie Luo
    • Xiongxin Jiang

    Technical Paper 27 November 2018 Pages: 651 - 661

    

11. Application of 3D EBSD Technique to Study Crystallographic Texture in Heavily Cold-Rolled and Recrystallized Modified 9Cr–1Mo Steel

    • Pradyumna Kumar Parida
    • Arup Dasgupta
    • Saroja Saibaba

    Technical Paper 10 December 2018 Pages: 663 - 672

    

12. Fabrication and Characterization of Cu–B₄C Metal Matrix Composite by Powder Metallurgy: Effect of B₄C on Microstructure, Mechanical Properties and Electrical Conductivity

    • P. K. Prajapati
    • D. Chaira

    Technical Paper 22 November 2018 Pages: 673 - 684

    

13. An Investigation of the Bonding Behavior of Aluminum Strips in the Presence of an Alumina Layer During the Cold Roll Bonding Process

    • Hajar Farajzadeh Dehlordi
    • Mohammad Reza Toroghinejad
    • Keyvan Raeissi

    Technical Paper 03 January 2019 Pages: 685 - 691

    

14. Energy Absorption Property of Aluminum Foam Sandwich Panels Under Compression Load

    • Hualin Zhang
    • Renjun Dou
    • Yuebo Hu

    Technical Paper 19 December 2018 Pages: 693 - 699

    

15. Effects of Mechanical Milling Time and Boron Carbide Reinforcement Content on Powder and Hot Extruded Al–2wt.%Cu–B₄C Nanocomposites: Microstructural, Mechanical and Fracture Characterization

    • Ali Alizadeh
    • Mohammad Hossein Babaee

    Technical Paper 01 January 2019 Pages: 701 - 718

    

16. Sliding Wear Studies on Heat-Treated Functionally Graded Cu–Ni–Si/TiC Composite

    • R. Jojith
    • N. Radhika
    • U. Vipin

    Technical Paper 19 December 2018 Pages: 719 - 731

    

17. Synthesis of α-WO₃ Thin Film Using Pulsed Laser Deposition: Influence of Thickness on Optical and Electrical Properties

    • Baban P. Dhonge
    • Akash Singh
    • P. Parameswaran

    Technical Paper 01 January 2019 Pages: 733 - 740

    

18. Evaluation of Mechanical Properties and Microstructures of Ultrafine Grain Low-Carbon Steel Processed by Cryorolling and Annealing

    • Qing Yuan
    • Guang Xu
    • Hai-jiang Hu

    Technical Paper 18 December 2018 Pages: 741 - 749

    

19. Effect of Severe Plastic Deformation on Microstructure and Mechanical Behaviour of Friction-Welded Structural Steel IS2062

    • M. Nagaraj
    • B. Ravisankar

    Technical Paper 17 December 2018 Pages: 751 - 756

    

20. Study of Fine-Grained Pure Copper Fabrication by Cyclic Contraction/Expansion Extrusion (CCEE) Using Experimental and Finite Element Simulation Methods

    • Rasoul Asadi Peyghan
    • Hossein Jafarzadeh

    Technical Paper 01 January 2019 Pages: 757 - 765

    

21. Thermodynamics-Based Modeling of Iron- and Steelmaking Processes Using Flow Sheet-Based Approach Employing METSIM

    • Ajay Kumar Shukla

    Technical Paper 26 December 2018 Pages: 767 - 775

    

22. Blast Furnace Performance Under Varying Pellet Proportion

    • Ashish Agrawal

    Technical Paper 18 December 2018 Pages: 777 - 787

    

23. Surface Nanocrystallization Induced by Ultrasonic Shot Peening and Its Effect on Corrosion Resistance of Ti–6Al–4V Alloy

    • Sanjeev Kumar
    • V. Pandey
    • Vakil Singh

    Technical Paper 17 December 2018 Pages: 789 - 792

    

24. Degradation Behaviour of Nanostructured CeO₂ Films on Superalloy

    • Shafaq Ashraf Lone
    • Muzzamil Ahmad Eatoo
    • Atikur Rahman

    Technical Paper 12 February 2019 Pages: 793 - 800

    

25. Benchmarking of Hybrid TIG-MAG Arc Welding for Mild Steel

    • Onkar S. Sahasrabudhe
    • D. N. Raut

    Technical Paper 01 January 2019 Pages: 801 - 810

    

26. Effect of Power Input on Metallurgical and Mechanical Characteristics of Inconel-625 Welded Joints Processed Through Microwave Hybrid Heating

    • Ravindra I. Badiger
    • S. Narendranath
    • Ajit M. Hebbale

    Technical Paper 01 January 2019 Pages: 811 - 824

    

27. Numerical Simulation Study on Quality Control of the Center Macroscopic Segregation in the Continuous Casting Slab

    • Haitao Ma
    • Jiongming Zhang
    • Shunxi Wang

    Technical Paper 19 January 2019 Pages: 825 - 835