1. Deposition, Characterization and Evaluation of Monolayer and Multilayer Ni, Ni–P and Ni–P–Nano ZnO_p Coatings

   • Ali Varmazyar
   • Saeed Reza Allahkaram
   • Soheil Mahdavi

   Review Paper 14 February 2018 Pages: 1301 - 1309

   

2. Investigation on Mechanical and Adhesive Wear Behavior of Centrifugally Cast Functionally Graded Copper/SiC Metal Matrix Composite

   • N. Radhika
   • S. Thirumalini
   • A. Shivashankar

   Technical Paper 29 December 2017 Pages: 1311 - 1322

   

3. Active Nano Metal Oxide Coating for Bio-fouling Resistance

   • K. R. Rasmi
   • S. C. Vanithakumari
   • U. Kamachi Mudali

   Technical Paper 19 January 2018 Pages: 1323 - 1329

   

4. Multi Response Optimization and Experimental Investigations into the Impact of Wire EDM on the Tribological Properties of Ti–6Al–4V

   • Basil Kuriachen
   • K. P. Lijesh
   • P. Kuppan

   Technical Paper 24 January 2018 Pages: 1331 - 1341

   

5. Effects of SiCp Parameters on Microstructures, Interface Structure and Mechanical Property of Mg Bulk Composites Produced by Ultrasonic Vibration Processing

   • M. J. Shen
   • R. Yang
   • K. B. Nie

   Technical Paper 15 January 2018 Pages: 1343 - 1350

   

6. Tribological Properties of Electroless Nanocomposite Deposits with Influence of Aliquat 336 on 6061 Aluminium Alloy

   • Mohd. Imran Ansari
   • Dineshsingh G. Thakur

   Technical Paper 15 January 2018 Pages: 1351 - 1356

   

7. Characterisation-Assisted Reduction Roasting of BHJ, West Singhbhum, Jharkhand, India

   • Sanjeev Kumar Das
   • Ranjit Prasad
   • Rajendra Prasad Singh

   Technical Paper 17 January 2018 Pages: 1357 - 1362

   

8. Development of Ultrahigh Strength TRIP Steel Containing High Volume Fraction of Martensite and Study of the Microstructure and Tensile Behavior

   • I. Hajiannia
   • M. Shamanian
   • N. Saeidi

   Technical Paper 22 January 2018 Pages: 1363 - 1370

   

9. Alkylimidazolium Bromides as Corrosion Inhibitors for Mild Steel in Acidic Medium

   • Šárka Langová
   • Petr Pánek
   • Šárka Vicherková

   Technical Paper 18 January 2018 Pages: 1371 - 1378

   

10. The Influence of Heat Treatment on Nanoscale Microstructure and Crystal Orientation of 7055 Aluminum Alloy Before and After High-Speed Milling

    • Ping Zhang
    • Youqiang Wang

    Technical Paper 06 February 2018 Pages: 1379 - 1387

    

11. A Comparison of Wear Due to Abrasion of WC–Ni Coatings on Aluminium Alloy Sprayed by HVOF and Detonation Gun

    • S. Gokul Lakshmi
    • G. M. Reddy
    • Manish Roy

    Technical Paper 30 January 2018 Pages: 1389 - 1399

    

12. Effect of Pressure on Graphite Morphology and Mechanical Properties of Squeeze Cast Hyper-Eutectic Grey Cast Iron

    • Hamid Reza Pourmahmoudi
    • Behzad Niroumand

    Technical Paper 27 January 2018 Pages: 1401 - 1410

    

13. Friction Stir Surface Processing of Al 6061 Alloy: Role of Surface Alloying with Copper and Heat-Treatment

    • Kaustubh M. Mane
    • Santosh S. Hosmani

    Technical Paper 27 January 2018 Pages: 1411 - 1425

    

14. Microstructural and Tribological Characteristics of Al–10Cu–Fe alloy Produced by Vertical Centrifugal Casting process

    • L. Sankara Rao
    • K. Raju
    • S. N. Ojha

    Technical Paper 29 January 2018 Pages: 1427 - 1438

    

15. Size by Size Separation Characteristics of a Coal Cleaning Jig

    • Subha Ranjan Paul
    • Sumantra Bhattacharya

    Technical Paper 03 February 2018 Pages: 1439 - 1444

    

16. Investigation of the Geometry of Rectangular Cross Section Aluminum Parts in Low Pressure Tube Hydroforming Process

    • Seyed Jalal Hashemi
    • Farzad Rahmani

    Technical Paper 29 January 2018 Pages: 1445 - 1453

    

17. Effect of Cu Addition on Microstructure and Hardness of As-Cast and Heat-Treated High-Cr Cast Iron

    • Tapan Sarkar
    • Manidipto Mukherjee
    • Tapan Kumar Pal

    Technical Paper 25 January 2018 Pages: 1455 - 1461

    

18. Effect of ARB Cycle Number and Second Phase Content on Mechanical properties and Microstructure of Pb–Ag Composite

    • Maryam Karbasi
    • Eskandar Keshavarz Alamdari
    • Elaheh Amirkhani Dehkordi

    Technical Paper 22 February 2018 Pages: 1463 - 1473

    

19. Melting and Thermomechanical Processing of High Strength 0.3%C–CrMoV (ESR) Steel

    • P. Ramkumar
    • V. Anil Kumar
    • P. V. Venkitakrishnan

    Technical Paper 21 February 2018 Pages: 1475 - 1485

    

20. Cleaning of Coal by Multi Gravity Separator

    • Ram Chandra Chaurasia
    • Dejalin Sahu
    • Suresh Nikkam

    Technical Paper 20 February 2018 Pages: 1487 - 1495

    

21. Effect of Gold Addition on the Microstructure and Mechanical Properties of Sn–3.8Ag–0.7Cu Lead-Free Solder Alloy

    • V. L. Niranjani
    • Pamidi Venkateswarlu
    • S. V. Kamat

    Technical Paper 23 February 2018 Pages: 1497 - 1505

    

22. Enhancement of High Temperature Frictional Properties of Nanostructured Hard Anodized Coatings by PTFE Solid Lubricant

    • Saeed Shirmohammadi Yazdi
    • Fatemeh Ebrahimi
    • Fakhreddin Ashrafizadeh

    Technical Paper 16 February 2018 Pages: 1507 - 1518

    

23. Microstructure, Mechanical and Sliding Wear Behavior of AA5083–B₄C/SiC/TiC Surface Composites Fabricated Using Friction Stir Processing

    • Vikram Kumar S. Jain
    • P. M. Muhammed
    • S. P. Kumaresh Babu

    Technical Paper 24 February 2018 Pages: 1519 - 1529

    

24. Temperature Effect of Hot Rolling Process on Microstructure, Strength and Fracture Toughness of X65 Pipeline Steel

    • Paria Siahpour
    • Reza Miresmaeili
    • Alireza Sabour Rouhaghdam

    Technical Paper 22 February 2018 Pages: 1531 - 1541

    

25. Improvements in Mechanical Properties of Spring Steel Through Surface Tempering and Hardening Assisted by SMAT

    • Prashant Tadge
    • C. Sasikumar

    Technical Paper 21 February 2018 Pages: 1543 - 1552

    

26. A Comprehensive Study of Parameters Effect on Mechanical Properties of Butt Friction Stir Welding in Aluminium 5083 and Copper

    • S. Rasaee
    • A. H. Mirzaei
    • S. Hayati

    Technical Paper 03 March 2018 Pages: 1553 - 1561