1. Improvement of Thermoplastic Forming Ability of Ti–Zr–Ni–Cu Metallic Glass by Addition of Sn

   • Yeong-Seong Kim
   • Woo-Chul Kim
   • Do-Hyang Kim

   OriginalPaper 28 November 2019 Pages: 1359 - 1365

   

2. Thermodynamic Prediction of Phase Formation in Ni–P Alloy System During Mechanical Alloying: Comparison with Electroless Plating Technique

   • M. Imani
   • E. Dastanpoor
   • A. K. Basak

   OriginalPaper 06 January 2020 Pages: 1366 - 1373

   

3. Effect of Cu Contents on Nanocluster Formation and Two-Step Aging Behavior in Al–Mg–Si Alloys

   • MinYoung Song
   • InSu Kim
   • SungKil Hong

   OriginalPaper 13 November 2019 Pages: 1374 - 1381

   

4. Correction to: Effect of Cu Contents on Nanocluster Formation and Two-Step Aging Behavior in Al–Mg–Si Alloys

   • MinYoung Song
   • InSu Kim
   • SungKil Hong

   Correction 09 January 2020 Pages: 1382 - 1382

5. Effect of Pre-Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Precipitation Hardened Steel

   • Sumin Kim
   • Taejin Song
   • Sangshik Kim

   OriginalPaper 16 September 2019 Pages: 1383 - 1391

   

6. Comparative Modeling of Power Hardening Micro-scale Metallic Plates Based on Lower and Higher-Order Strain Gradient Plasticity Theories

   • Amer Darvishvand
   • Asghar Zajkani

   OriginalPaper 09 January 2020 Pages: 1392 - 1402

   

7. Influence of Li Addition on the Microstructures and Mechanical Properties of Mg–Li Alloys

   • Jun Zhao
   • Jie Fu
   • Fusheng Pan

   OriginalPaper 19 November 2019 Pages: 1403 - 1415

   

8. Enhancement of Impurity, Machinability and Mechanical Properties in Te-Treated 0Cr18Ni9 Steel

   • Jian-bo Xie
   • Tian Fan
   • Jian-xun Fu

   OriginalPaper 06 December 2019 Pages: 1416 - 1427

   

9. Influence of Thermomechanical Treatments on the Microstructure and Mechanical Properties of Aluminium Alloy AA2219 Hand Forgings

   • M. Arumugam
   • P. Ramesh Narayanan
   • V. Muthupandi

   OriginalPaper 09 December 2019 Pages: 1428 - 1437

   

10. Dynamic Compression Behavior of a Mg–Gd-Based Alloy at Elevated Temperature

    • Changping Tang
    • Kai Wu
    • Xiao Liu

    OriginalPaper 04 December 2019 Pages: 1438 - 1447

    

11. Effect of Rare Earth Er on Microstructure and Creep Behavior of Al–7Si–0.3Mg Alloy

    • S. Rashno
    • M. Reihanian
    • Khalil Ranjbar

    OriginalPaper 05 December 2019 Pages: 1448 - 1457

    

12. Dislocation Damping and Defect Friction Damping in Magnesium: Molecular Dynamics Study

    • Jingyu Zhai
    • Xinyuan Song
    • Qingkai Han

    OriginalPaper 21 December 2019 Pages: 1458 - 1468

    

13. Phase Stability and Thermo-Physical Properties of Nickel-Aluminum Binary Chemically Disordered Systems via First-Principles Study

    • Zhiqin Wen
    • Yuhong Zhao
    • Hua Hou

    OriginalPaper 07 December 2019 Pages: 1469 - 1477

    

14. Nano-CeO₂ Doped Cu–Al–Ni SMAs with Enhanced Mechanical as well as Shape Recovery Characteristics

    • Shahadat Hussain
    • Abhishek Pandey
    • Rupa Dasgupta

    OriginalPaper 09 December 2019 Pages: 1478 - 1482

    

15. Effect of Mn Modification on Microstructure and Mechanical Properties of Magnesium Alloy with Low Gd Content

    • Dongdong Gu
    • Jian Peng
    • Fusheng Pan

    OriginalPaper 08 January 2020 Pages: 1483 - 1492

    

16. Relation Between Zn Additions, Microstructure and Corrosion Behavior of New Wrought Mg-5Al Alloys

    • Polina Metalnikov
    • Guy Ben-Hamu
    • Kwang Seon Shin

    OriginalPaper 20 November 2019 Pages: 1493 - 1505

    

17. Effects of Fe₂O₃ and B₄C Addition on the Mechanical Properties and Corrosion Resistance of Al–Mg–Si Alloy in 3.5% Brine Solution

    • Mummoorthi Duraipandian

    OriginalPaper 03 January 2020 Pages: 1506 - 1518

    

18. Evaluation of Palm Kernel Cake Powder (Elaeis guineensis Jacq.) as Corrosion Inhibitor for Carbon Steel in Acidic Media

    • A. M. Santos
    • I. P. Aquino
    • V. R. Capelossi

    OriginalPaper 18 January 2020 Pages: 1519 - 1530

    

19. Preparation and Improved Friction and Wear Performance of the Nano-MoSi₂ Coating on Ni Substrate by Plasma Spraying

    • Mohammad Erfanmanesh
    • Saeed Reza Bakhshi
    • Masoud Barekat

    OriginalPaper 03 January 2020 Pages: 1531 - 1539

    

20. Wear Tribo-Performances of Laser Cladding Colmonoy-6 and Stellite-6 Micron Layers on Stainless Steel 304 Using Yb:YAG Disk Laser

    • N. Jeyaprakash
    • Che-Hua Yang
    • Sheng-Po Tseng

    OriginalPaper 13 November 2019 Pages: 1540 - 1553

    

21. Structural and Mechanical Characterization of Platinum Thin Films Prepared Electrochemically on ITO/Glass Substrate

    • A. Kathalingam
    • Karuppasamy Pandian Marimuthu
    • Hyun-Seok Kim

    OriginalPaper 13 November 2019 Pages: 1554 - 1564

    

22. Microstructure and Tensile Properties of Mg–5Zn Alloy Containing Ca

    • Elaheh Maleki
    • Farzad Shahri
    • Masoud Emamy

    OriginalPaper 12 November 2019 Pages: 1565 - 1577

    

23. Effect of Semi-Solid Heat Treatment on the Microstructure and Dry Sliding Wear Behavior of Al–20Si Alloy at Optimized Parametric Conditions

    • Mihira Acharya
    • Animesh Mandal

    OriginalPaper 28 November 2019 Pages: 1578 - 1586

    

24. Investigation on Microstructural Delamination and Compositional Segregation in Flange Steel with a High Stretch Ratio

    • Wen Liang
    • Qing Yuan
    • Guang Xu

    OriginalPaper 30 January 2020 Pages: 1587 - 1598

    

25. Material Selection: Exploring the Reliability of Material Perception Data and Its Relevance to Materials

    • Jaeho Choi

    OriginalPaper 24 December 2019 Pages: 1599 - 1604

    

26. Microstructure, Mechanical Properties and Tribological Behavior of Two-Phase Mg–Y–Cu Alloys with Long Period Stacking Ordered Phases

    • L. Zhang
    • H. Huang
    • X. R. Liu

    OriginalPaper 02 January 2020 Pages: 1605 - 1612

    

27. Microstructure and Mechanical Properties of Mg–8Y–2Ho–2Zn Alloy with Long Period Stacking Ordered Phase

    • J. A. Liu
    • J. Wang
    • Y. M. Yao

    OriginalPaper 06 January 2020 Pages: 1613 - 1619

    

28. Modeling the Age-Hardening Process of Aluminum Alloys Containing the Prolate/Oblate Shape Precipitates

    • Nozar Anjabin

    OriginalPaper 02 January 2020 Pages: 1620 - 1630

    

29. In-Situ Synthesis of Aluminum Matrix Composite from Al–NiO System by Mechanical Alloying

    • Samaneh Mamnooni
    • Ehsan Borhani
    • Davoud Bovand

    OriginalPaper 05 December 2019 Pages: 1631 - 1638

    

30. Microstructure, Mechanical Properties and Wear Performance of WC/Brass Composites Produced by Pressureless and Spark Plasma Sintering Processes

    • Mehdi Naghikhani
    • Mohammad Ardestani
    • Mohammad Moazami-Goudarzi

    OriginalPaper 16 December 2019 Pages: 1639 - 1648

    

31. Preparation of Ultrafine Tungsten-Molybdenum Composite Powder and Its Sintering Behavior

    • He Zhang
    • Guo-Hua Zhang

    OriginalPaper 04 January 2020 Pages: 1649 - 1661

    

32. Investigation of Microstructure of Aluminum Based Composite Material Obtained by Mechanical Alloying

    • Veysel Erturun
    • Sezer Çetin
    • Oguzhan Sahin

    OriginalPaper 04 January 2020 Pages: 1662 - 1670

    

33. Influence of Laser Power on Grain Size and Tensile Strength of 5A90 Al–Li Alloy T-joint Fabricated by Dual Laser-Beam Bilateral Synchronous Welding

    • Shuai Chen
    • Xiaohong Zhan
    • Dongtao Liu

    OriginalPaper 16 November 2019 Pages: 1671 - 1685

    

34. Microstructure and Mechanical Properties of the Commercially Pure Copper Tube After Processing by Hydrostatic Tube Cyclic Expansion Extrusion (HTCEE)

    • M. Motallebi Savarabadi
    • G. Faraji
    • M. Eftekhari

    OriginalPaper 15 November 2019 Pages: 1686 - 1700

    

35. Deformation, Cracking and Fracture Behavior of Dynamically-Formed Oxide Layers on Molten Metals

    • Mehdi Mehrabian
    • Behzad Nayebi
    • Mohammadreza Shokouhimehr

    OriginalPaper 13 November 2019 Pages: 1701 - 1712

    

36. Effect of Mn Addition on the Mechanical Properties of Al–12.6Si Alloy: Role of Al₁₅(MnFe)₃Si₂ Intermetallic and Microstructure Modification

    • Prosanta Biswas
    • Surajit Patra
    • Manas Kumar Mondal

    OriginalPaper 19 November 2019 Pages: 1713 - 1727

    

37. Physically-Based Constitutive Modelling of As-Cast CL70 Steel for Hot Deformation

    • Fei Chen
    • Xiaodong Zhao
    • Xiaofeng Zhang

    OriginalPaper 21 November 2019 Pages: 1728 - 1738

    

38. Effect of TiB₂/Gr Hybrid Reinforcements in Al 7075 Matrix on Sliding Wear Behavior Analyzed by Response Surface Methodology

    • S. Sivasankaran
    • K. R. Ramkumar
    • Osama M. Irfan

    OriginalPaper 29 November 2019 Pages: 1739 - 1755

    

39. Microstructure Evolution of AA1070 Aluminum Alloy Processed by Micro/Meso-Scale Equal Channel Angular Pressing

    • Walaa Abdel-Aziem
    • Atef Hamada
    • Mohsen A. Hassan

    OriginalPaper 25 November 2019 Pages: 1756 - 1768

    

40. Influence of SiAlON Ceramic Reinforcement on Ti6Al4V Alloy Matrix via Spark Plasma Sintering Technique

    • Oluwasegun Eso Falodun
    • Samuel Ranti Oke
    • Peter Apata Olubambi

    OriginalPaper 28 November 2019 Pages: 1769 - 1778

    

41. 27R-SiAlON Reinforced AlN Composite: Synthesis, Sintering and Characterization

    • Mita Biswas
    • Siddhartha Bandyopadhyay

    OriginalPaper 06 December 2019 Pages: 1779 - 1789

    

42. High Temperature Mechanical Properties and Microstructures of Thermally Stabilized Fe-Based Alloys Synthesized by Mechanical Alloying Followed by Hot Extrusion

    • Hasan Kotan
    • Kris A. Darling
    • Tom Luckenbaugh

    OriginalPaper 06 December 2019 Pages: 1790 - 1797

    

43. Nanostructural Evolution and Deformation Mechanisms of Severely Deformed Pure Fe

    • N. Forouzanmehr
    • H. R. Jafarian
    • M. Nili-Ahmadabadi

    OriginalPaper 04 January 2020 Pages: 1798 - 1807

    

44. Microstructure Characterization and Properties of Ti Carbohydride/Cu–Ti/GNP Nanocomposites Prepared by Wet Ball Milling and Subsequent Magnetic Pulsed Compaction

    • M. A. Eryomina
    • S. F. Lomayeva
    • S. L. Demakov

    OriginalPaper 14 November 2019 Pages: 1808 - 1818

    

45. Effect of Pack Rolling and Heat Treatment on Microstructure and Mechanical Properties of B₄C_P/6061Al Composite Prepared by Powder Metallurgy

    • Shengpu Liu
    • Zhaoyao Zhou
    • Shi Shu

    OriginalPaper 20 November 2019 Pages: 1819 - 1826

    

46. Performance Enhancing of Spray Formed Al/Graphite Alloy Composite by Rolling

    • Surendra Kumar Chourasiya
    • Gaurav Gautam
    • Devendra Singh

    OriginalPaper 21 November 2019 Pages: 1827 - 1838

    

47. Effect of SiC Nanofiber Addition on Microstructure, Mechanical Properties and Creep Behaviour of High Pressure Die Cast AZ91-1Sr Alloy

    • Güven Yarkadaş
    • Hüseyin Şevik

    OriginalPaper 05 December 2019 Pages: 1839 - 1847

    

48. Microstructure and Tensile Strength of Nano-TiC_p/Mg–Zn–Ca Magnesium Matrix Nanocomposites Processed by Multidirectional Forging

    • K. B. Nie
    • Z. H. Zhu
    • J. G. Han

    OriginalPaper 18 December 2019 Pages: 1848 - 1858

    

49. Multi Tribo-Performance Optimization of AA7075–Al₂O₃ Composites by Grey Based Response Surface Methodology

    • Santanu Sardar
    • Debdulal Das

    OriginalPaper 23 December 2019 Pages: 1859 - 1879

    

50. Comparative Hot Workability Characteristics of an Al–Si/SiCp Aluminium Matrix Composite Hybrid Reinforced with Various TiB₂ Additions

    • Xinrong Chen
    • Zhiming Xu
    • Fulin Jiang

    OriginalPaper 04 January 2020 Pages: 1880 - 1891