1. Microstructural evolution and mechanical properties of misch metal added Mg-Si alloys

   • K. K. Ajith Kumar
   • U. T. S. Pillai
   • M. Chakraborty

   OriginalPaper 13 November 2013 Pages: 1167 - 1172

2. Microstructural development of brass alloys with various Bi and Pb additions

   • Chih-Chun Hsieh
   • Jia-Siang Wang
   • Weite Wu

   OriginalPaper 30 September 2013 Pages: 1173 - 1179

3. Reverse transformation from α′ to γ in lightly and heavily cold-drawn austenitic stainless steel fibers

   • Shun-Tung Yang
   • Weng-Sing Hwang
   • Tien-Wei Shyr

   OriginalPaper 30 September 2013 Pages: 1181 - 1185

4. Hardness of porous nanocrystalline Co-Ni electrodeposits

   • C. Ma
   • S. C. Wang
   • F. C. Walsh

   OriginalPaper 30 September 2013 Pages: 1187 - 1192

5. Influence of punch geometries on the divided material flow in a double cup extrusion process

   • Jeong Hoon Noh
   • Beong Bok Hwang

   OriginalPaper 13 November 2013 Pages: 1193 - 1202

6. Effect of nickel content on the neutron irradiation embrittlement of Ni-Mo-Cr steels

   • Chang-Hoon Lee
   • R. Kasada
   • Hu-Chul Lee

   OriginalPaper 30 September 2013 Pages: 1203 - 1208

7. Microstructural development of cobalt ferrite ceramics and its influence on magnetic properties

   • Gi-Yeop Kim
   • Jae-Ho Jeon
   • Si-Young Choi

   OriginalPaper 30 September 2013 Pages: 1209 - 1213

8. Evaluation of material properties of 3Cr-1Mo-0.25V steel by magnetic, electrical and elastic properties

   • Young Hyun Nam
   • Seung Hoon Nahm

   OriginalPaper 30 September 2013 Pages: 1215 - 1220

9. Atomistic simulation of hydrogen diffusion at tilt grain boundaries in vanadium

   • Jae-Hyeok Shim
   • Won-Seok Ko
   • Byeong-Joo Lee

   OriginalPaper 30 September 2013 Pages: 1221 - 1225

10. Effect of weight percentage and particle size of B₄C reinforcement on physical and mechanical properties of powder metallurgy Al2024-B₄C composites

    • T. Varol
    • A. Canakci

    OriginalPaper 30 September 2013 Pages: 1227 - 1234

11. Ti₃SiC₂-Cu composites by mechanical milling and spark plasma sintering: Possible microstructure formation scenarios

    • Dina V. Dudina
    • Vyacheslav I. Mali
    • Vladimir A. Bataev

    OriginalPaper 30 September 2013 Pages: 1235 - 1241

12. Friction stir spot welded joints of 409L stainless steels fabricated by a convex shoulder tool

    • Md. Abu Mowazzem Hossain
    • Md. Tariqul Hasan
    • Heung Nam Han

    OriginalPaper 30 September 2013 Pages: 1243 - 1250

13. Joining of dissimilar AZ31B magnesium alloy and SS400 mild steel by hybrid gas tungsten arc friction stir welding

    • SungMin Joo

    OriginalPaper 30 September 2013 Pages: 1251 - 1257

14. Friction stir welding of twin-roll cast EN AW 3003 plates

    • Yucel Birol
    • Sefika Kasman

    OriginalPaper 30 September 2013 Pages: 1259 - 1266

15. Evaluation of weld metal hot cracking susceptibility in superaustenitic stainless steel

    • Kook-soo Bang
    • Seong-hyun Pak
    • Sang-kon Ahn

    OriginalPaper 30 September 2013 Pages: 1267 - 1273

16. Magnesium removal from molten aluminum by Cl₂ bubbling

    • Woo-Gwang Jung
    • Jee-Wook Lee
    • Won-Yong Kim

    OriginalPaper 30 September 2013 Pages: 1275 - 1281

17. Role of alkali carbonate and salt in topochemical synthesis of K_1/2Na_1/2NbO₃ and NaNbO₃ templates

    • Jae-Seok Lee
    • Jae-Ho Jeon
    • Si-Young Choi

    OriginalPaper 30 September 2013 Pages: 1283 - 1287

18. Application of ball-milled powder mixture to intermetallics coating through reaction synthesis

    • Han-Young Lee
    • Tae-Jun Kim
    • Yong-Jae Cho

    OriginalPaper 30 September 2013 Pages: 1289 - 1293

19. Synthesis and characterization of CrZrAlN films using unbalanced magnetron sputtering with segment targets

    • Dong Jun Kim
    • Sung Min Kim
    • Min Hyung Lee

    OriginalPaper 30 September 2013 Pages: 1295 - 1299

20. In-Situ (TiB+TiC) particulate reinforced titanium matrix composites: Effect of B₄C size and content

    • Bong-Jae Choi
    • Young-Jig Kim

    OriginalPaper 30 September 2013 Pages: 1301 - 1307

21. Structural, optical and chemical analysis of zinc sulfide thin film deposited by RF-mganetron sputtering and post deposition annealing

    • Dongjun Yoo
    • Moon Suk Choi
    • Changhwan Choi

    OriginalPaper 30 September 2013 Pages: 1309 - 1316

22. Effect of radio-frequency electric power applied to a boron nitride unbalanced magnetron sputter target on the deposition of cubic boron nitride thin film

    • Ji-Sun Ko
    • Jong-Keuk Park
    • Young-Joon Baik

    OriginalPaper 30 September 2013 Pages: 1317 - 1321

23. Effect of deposition temperature on cubic boron nitride thin film deposited by unbalanced magnetron sputtering method with a nanocrystalline diamond buffer layer

    • Eun-Sook Lee
    • Jong-Keuk Park
    • Young-Joon Baik

    OriginalPaper 30 September 2013 Pages: 1323 - 1326

24. Optical and electrical properties of CuO thin films deposited at several growth temperatures by reactive RF magnetron sputtering

    • Shinho Cho

    OriginalPaper 30 September 2013 Pages: 1327 - 1331

25. Improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of the grid edge

    • Seongtak Kim
    • Sungeun Park
    • Donghwan Kim

    OriginalPaper 30 September 2013 Pages: 1333 - 1338

26. Measurement of adhesion and bonding strength studies in 3D interconnect structures using atomic force microscopy

    • Eunmi Choi
    • Hee Soo Choi
    • Sung Gyu Pyo

    OriginalPaper 13 November 2013 Pages: 1339 - 1342

27. Effect of solution concentration on the surface properties of Y₂O₃ solution-coated film on flexible Metal Substrate

    • Rockkil Ko
    • Boomin Kang
    • Youngchul Kim

    OriginalPaper 13 November 2013 Pages: 1343 - 1345

28. Microstructure refinement of pulsed laser deposited La_0.6Sr_0.4CoO_3−δ thin-film cathodes for solid oxide fuel cell

    • Jaeyeon Hwang
    • Heon Lee
    • Ji-Won Son

    OriginalPaper 13 November 2013 Pages: 1347 - 1349

29. Pressure-composition-isotherm behaviors of MgH_x-BCY composites by reactive mechanical alloying

    • Soo-Sun Lee
    • Na-Ri Lee
    • Tae-Whan Hong

    OriginalPaper 13 November 2013 Pages: 1351 - 1353

30. Preparation of doping metal TiO₂ particle/nanotube composite layer and their applications in dye-sensitized solar cells

    • Chang-Hyo Lee
    • Kyung Hwan Kim
    • Hyung-Wook Choi

    OriginalPaper 13 November 2013 Pages: 1355 - 1359

31. Structural and optical properties of bandgap engineered bismuth titanate by cobalt doping

    • Chung Wung Bark

    OriginalPaper 13 November 2013 Pages: 1361 - 1364

32. Enhancement of light harvesting in dye-sensitized solar cells by using Först-type resonance energy transfer

    • Jong Hun Cheon
    • Dae Young Jung
    • Jae Hong Kim

    OriginalPaper 13 November 2013 Pages: 1365 - 1368

33. Enhancing the ionic transport of PEO-based composite polymer electrolyte by addition of TiO₂ nanofiller for quasi-solid state dye-sensitized solar cells

    • Tran Thanh Trang
    • Do Kyung Lee
    • Jae Hong Kim

    OriginalPaper 13 November 2013 Pages: 1369 - 1372

34. Novel water-air circulation quenching process for AISI 4140 steel

    • Liyun Zheng
    • Dawei Zheng
    • Kai Zhang

    Short Communications 30 September 2013 Pages: 1373 - 1376

35. Enhanced boron gettering effect of n-type solar grade Si wafers by in situ oxidation

    • Young Joon Cho
    • Hyo Sik Chang

    Short Communications 30 September 2013 Pages: 1377 - 1380

36. Erratum to: Effect of surface area on corrosion properties of magnesium for biomaterials

    • Woo-Cheol Kim
    • Kwon-Hoon Han
    • Young-Yul Kim

    Erratum 13 November 2013 Pages: 1381 - 1381