1. Precipitate prediction model of Mg-xAl(x=3,6,9) alloys

   • Byeong Deok Lee
   • Eun Jeong Kim
   • Jeong Whan Han

   OriginalPaper 10 March 2013 Pages: 135 - 145

2. Quantitative analyses of dissolution and precipitation kinetics of θ-Al₂Cu phase in an Al-6.2Si-2.9Cu alloy using electrical resistivity

   • Jae-Gil Jung
   • June-Soo Park
   • Young-Kook Lee

   OriginalPaper 10 March 2013 Pages: 147 - 152

3. Kinetic transition during the growth of proeutectoid ferrite in Fe-C-Mn-Si quaternary steel

   • Guo-Hong Zhang
   • Yoon-Uk Heo
   • Dong-Woo Suh

   OriginalPaper 10 March 2013 Pages: 153 - 158

4. Fabrication and compressive properties of porous TiAl-Mn intermetallics by powder metallurgical route

   • Jong-Myeong Kim
   • Jewoosoo Kim
   • Mok-Soon Kim

   OriginalPaper 10 March 2013 Pages: 159 - 162

5. Effect of wear debris of Al₂O₃, ZrO₂ and WC balls on Y-α/β-SiAlON ceramics consolidated by spark plasma sintering

   • Sungsu Chun
   • Bong-Ki Min
   • Sukyoung Kim

   OriginalPaper 10 March 2013 Pages: 163 - 169

6. Effect of a grain refiner cum modifier on mechanical properties of Al-7Si and Al-11Si alloys

   • S. M. Jigajinni
   • K. Venkateswarlu
   • S. A. Kori

   OriginalPaper 10 March 2013 Pages: 171 - 181

7. Tensile and electrical properties of direct aged Cu-Ni-Si-x%Ti alloys

   • Eungyeong Lee
   • Kwangjun Euh
   • Sangshik Kim

   OriginalPaper 10 March 2013 Pages: 183 - 188

8. RETRACTED ARTICLE: Microstructures and morphologies of B2-Ordered NiAl(Co) and FeAl(Co)

   • Chang-Sup Oh
   • Chang-Suk Han

   OriginalPaper 10 March 2013 Pages: 189 - 195

9. Transition of crack propagation from a transgranular to an intergranular path in an overaged Al-Zn-Mg-Cu alloy during cyclic loading

   • Xu Chen
   • Zhiyi Liu
   • Sumin Zeng

   OriginalPaper 10 March 2013 Pages: 197 - 203

10. Microstructure and corrosion behavior of rapidly solidified Mg-Zn-Y alloys

    • S. W. Nam
    • W. T. Kim
    • T. S. Kim

    OriginalPaper 10 March 2013 Pages: 205 - 209

11. Microstructure evolution of sputter-deposited Al_0.75Mg_0.25 alloy films

    • Gun-Joo Sun
    • Sang Sub Kim

    OriginalPaper 10 March 2013 Pages: 211 - 215

12. Influence of ultraviolet light irradiation on the corrosion behavior of carbon steel AISI 1015

    • H. R. Riazi
    • I. Danaee
    • M. Peykari

    OriginalPaper 10 March 2013 Pages: 217 - 224

13. Microstructure and properties of heavily drawn Cu-Ag-Fe composites

    • J. S. Huang
    • D. W. Yao
    • L. Meng

    OriginalPaper 10 March 2013 Pages: 225 - 230

14. Derivation of mechanical characteristics for Ni/Au intermetallic surface with SAC305 solder

    • Jong-Min Kim
    • Hyun-Boo Lee
    • Jae-Boong Choi

    OriginalPaper 10 March 2013 Pages: 231 - 236

15. Phase transformations and hydrogen-storage characteristics of Mg-transition metal-oxide alloys

    • Myoung Youp Song
    • Sung Hwan Baek
    • Hye Ryoung Park

    OriginalPaper 10 March 2013 Pages: 237 - 244

16. Effect of Al concentration on photoluminescence properties of sol-gel derived hydrogen annealed ZnO

    • Firoz Khan
    • Sadia Ameen
    • Hyung Shik Shin

    OriginalPaper 10 March 2013 Pages: 245 - 250

17. Influences of cyclic loading on martensite transformation of TRIP steels

    • W. J. Dan
    • Z. G. Hu
    • W. G. Zhang

    OriginalPaper 10 March 2013 Pages: 251 - 257

18. Prediction of void closure in steel slabs by finite element analysis

    • Jong-Jin Park

    OriginalPaper 10 March 2013 Pages: 259 - 265

19. New manufacturing method for Fe-Si magnetic powders using modified pack-cementation process

    • Ji Young Byun
    • Jang Won Kim
    • Pyungwoo Jang

    OriginalPaper 10 March 2013 Pages: 267 - 271

20. Zinc phosphate conversion coatings on magnesium alloys: A review

    • Nguyen Van Phuong
    • Kyuhwan Lee
    • Sungmo Moon

    OriginalPaper 10 March 2013 Pages: 273 - 281

21. Restoration of face-centered cubic metals subjected to kinetic spraying

    • Kicheol Kang
    • Gyuyeol Bae
    • Changhee Lee

    OriginalPaper 10 March 2013 Pages: 283 - 293

22. Shape memory effect of TiNi-based springs trained by constraint annealing

    • Jiangan Wang
    • Jianxin Wang

    OriginalPaper 10 March 2013 Pages: 295 - 301

23. Formation of CIGS thin absorption layer by sequential sputtering of CuGa/In/CuGa precursor on Mo/SLG with post selenization

    • Jae-Kwan Sim
    • K. Ashok
    • Cheul-Ro Lee

    OriginalPaper 10 March 2013 Pages: 303 - 308

24. Hydrogenation reaction of Mg-Based alloys fabricated by rapid solidification

    • MyoungYoup Song
    • SungNam Kwon
    • Hye Ryoung Park

    OriginalPaper 10 March 2013 Pages: 309 - 314

25. Deformation behavior of SS400 Thick plate by high-frequency-induction-heating-based line heating

    • Kwang Seok Lee
    • Deuk Ha Eom
    • Jung-Hwan Lee

    OriginalPaper 10 March 2013 Pages: 315 - 328

26. Effects of chemical composition on the microstructure and mechanical properties of FCAW-S weld metal containing 2% Ni

    • Kook-Soo Bang
    • Woong Kil
    • Woong-Seong Chang

    OriginalPaper 10 March 2013 Pages: 329 - 334

27. Tribological approaches to material removal rate during chemical mechanical polishing

    • Hong Jin Kim
    • Young-Jun Jang
    • Yongsun Ko

    OriginalPaper 10 March 2013 Pages: 335 - 339

28. Dielectric properties of Mg- and Mn-doped (Ba_1−xSr_x)(Ti_1−yZr_y)O₃

    • Soo Kyong Jo
    • Sung Hyung Kang
    • Young Ho Han

    OriginalPaper 10 March 2013 Pages: 341 - 345

29. Rare earth dependent formation of PbF₂ nanocrystals and its effect on the emission properties in oxyfluoride glasses

    • Kyoung Hoon Kim
    • Yong Gyu Choi
    • Woon Jin Chung

    OriginalPaper 10 March 2013 Pages: 347 - 352

30. Biodegradation and cytotoxic properties of pulse anodized Mg alloys

    • Yu Kyoung Kim
    • Il Song Park
    • Min Ho Lee

    OriginalPaper 10 March 2013 Pages: 353 - 360

31. Structure and compressive strength of silicon open-cell foam obtained by a centrifugal separation method

    • Ju-Young Cho
    • Ki-Young Kim

    OriginalPaper 10 March 2013 Pages: 361 - 365

32. Grain refining performance of Al-B master alloys with different microstructures on Al-7Si alloy

    • Tongmin Wang
    • Zongning Chen
    • Tingju Li

    Short Communications 10 March 2013 Pages: 367 - 370